422 Items

A Dream and Reality to Chemical Science in India - Acharya Prafulla Chandra Rây

Gourisankar Roymahapatra, Ben Bin Xu, Zhanhu Guo and Chittaranjan Sinha

Cover Page Article | published online: 25 Mar 2023

ES Materials and Manufacturing, 2023, 19, 977
A Dream and Reality to Chemical Science in India - Acharya Prafulla Chandra Rây

Defect Detection: Traditional Approaches to Deep Learning Methods, Future Trends and Challenges

An Da, Ng Kok Why and Fang-Fang Chua

Review Paper | published online: 17 Jul 2026

ES Materials and Manufacturing, , ,
Defect Detection: Traditional Approaches to Deep Learning Methods, Future Trends and Challenges

Review of the Most Promising Helium Source Areas of Kazakhstan

Moldir Mashrapova, Valeriy Vyalov, Nurbol Tileuberdi, Iskander Gussenov and Aigerim Kaidar 

Review Paper | published online: 19 Aug 2026

ES Materials and Manufacturing, , , 2483
Review of the Most Promising Helium Source Areas of Kazakhstan

Application of Analysis Software for Investigating the Behavior of Reinforced Concrete Square Short Columns Under Axial Load

Radwa Defalla Abdel Hafez, Magdy Youssef Riad Riad, Mohamed Hamdy and Samir M. Ahmed

Research Paper | published online: 12 Sep 2026

ES Materials and Manufacturing, , ,
Application of Analysis Software for Investigating the Behavior of Reinforced Concrete Square Short Columns Under Axial Load

Surface Roughness Prediction in Computer Numerical Control Turning of EN24 Steel Using Machine Learning: Influence of Cutting Speed, Depth of Cut and Tool Nose Radius

T. Satish Kumar, K. Rajesh Kannan, R. Saravanan, Jana Petrů and Kanak Kalita

Research Paper | published online: 18 Sep 2026

ES Materials and Manufacturing, , ,
Surface Roughness Prediction in Computer Numerical Control Turning of EN24 Steel Using Machine Learning: Influence of Cutting Speed, Depth of Cut and Tool Nose Radius

Seismic Response and Frequency-Dependent Amplification of the Kapchagay Earthfill Dam from Instrumental Bedrock-to-Crest Earthquake Records

Zhangazy Moldamuratov, Gulfairuz Kareken, Karlygash Ilyassova, Guldana Abyieva, Nurzhan Shanshabayev, Vladimir Lapin, Alma Tasmaganbetova and Ainur Tukhtamisheva

Research Paper | published online: 21 Sep 2026

ES Materials and Manufacturing, , ,
Seismic Response and Frequency-Dependent Amplification of the Kapchagay Earthfill Dam from Instrumental Bedrock-to-Crest Earthquake Records

Activation Energies Calculation for Calcium Aluminate Cement Pastes with Silica Fume Additions when Subjected to High Temperatures

John F Zapata, Henry A. Colorado and Maryory A. Gómez

Research Paper | published online: 06 Oct 2026

ES Materials and Manufacturing, , ,
Activation Energies Calculation for Calcium Aluminate Cement Pastes with Silica Fume Additions when Subjected to High Temperatures

Flexural Behavior of Reinforced Concrete Beams Incorporating Cow Bone Powder and Fly Ash: A Numerical Study Using Analysis Systems

Samir M. Ahmed, Magdy Youssef Riad Riad, Radwa Defalla Abdel Hafez and Mohamed Hamdy

Research Paper | published online: 08 Oct 2026

ES Materials and Manufacturing, , ,
Flexural Behavior of Reinforced Concrete Beams Incorporating Cow Bone Powder and Fly Ash: A Numerical Study Using Analysis Systems

Synthesis, Characterization and Flocculation Performance of a Starch-Grafted Copolymer of [(2-Methacryloyloxy)-Ethyl] Trimethyl Ammonium Chloride and N,N-Dimethyl Acrylamide Polymeric Surfactant for Wastewater Treatment

K. B. Musabekov, K. Zh. Abdiyev, B. B. Sadykov, S. M. Tazhibayeva, Zh. Toktarbay, N. K. Musabekov, G. K. Kussainova, T. M. Seilkhanov and M. T. Tursynbetov 

Research Paper | published online: 09 Oct 2026

ES Materials and Manufacturing, , ,
Synthesis, Characterization and Flocculation Performance of a Starch-Grafted Copolymer of [(2-Methacryloyloxy)-Ethyl] Trimethyl Ammonium Chloride and N,N-Dimethyl Acrylamide Polymeric Surfactant for Wastewater Treatment

Performance Evaluation of Hollow Concrete Blocks Incorporating Recycled Electronic Waste: Mechanical and Durability Behavior

Jaruwan Chiwsaree, Burachat Chatveera, Gritsada Sua-Iam, Qudeer Hussain, Adnan Nawaz and Satish Paudel

Research Paper | published online: 09 Oct 2026

ES Materials and Manufacturing, , ,
Performance Evaluation of Hollow Concrete Blocks Incorporating Recycled Electronic Waste: Mechanical and Durability Behavior

Property-Driven Layer-Wise Optimization of Hybrid Composite Laminates for Impact Applications

Mahmoud Awad, Noha M. Hassan, Zied Bahroun, Rami Afif As'ad and Assil Charkoui

Research Paper | published online: 09 Oct 2026

ES Materials and Manufacturing, , ,
Property-Driven Layer-Wise Optimization of Hybrid Composite Laminates for Impact Applications

Quaternary Ammonium Salt-Based Deep Eutectic Solvents for Asphaltene Precipitation Inhibition: Colloidal Stabilization and Inhibition Mechanism

Sholpan Islam, Salimat Ryspaeva, Aigul Kerimkulova, Khadichakhan Rafikova, Irina Khisamedenova, Aidana Imanaliyeva, Esbol Shaimardan, Dinara Adikanova, Zhuldyz Zhaksybay and Tulegen Seilkhanov

Research Paper | published online: 09 Oct 2026

ES Materials and Manufacturing, , ,
Quaternary Ammonium Salt-Based Deep Eutectic Solvents for Asphaltene Precipitation Inhibition: Colloidal Stabilization and Inhibition Mechanism

Endless Frontiers - When Materials and Manufacturing Come Together

Qing Hao and Na Lu

Editorial | published online: 20 Oct 2018

ES Materials and Manufacturing, 2018, 1, 1-2

Nanocomposite - From Improved Properties to Fundamental Understanding

Qing Hao

Editorial | published online: 20 Oct 2018

ES Materials and Manufacturing, 2018, 2, 1-1

Nano-materials and Nano-manufacturing

Nuo Yang

Editorial | published online: 22 Feb 2019

ES Materials and Manufacturing, 2019, 3, 1-1

Key Factors to Address the Issue of Global Energy and Environment Crisis

Zhiqiang Liu

Editorial | published online: 30 May 2019

ES Materials and Manufacturing, 2019, 4, 1-1

Nanotechnology for Materials and Manufacturing — Physics, Synthesis, and Devices

Qing Hao

Editorial | published online: 25 Sep 2019

ES Materials and Manufacturing, 2019, 5, 1-1

Materials Properties and Manufacturing Processes

Liping Wang

Editorial | published online: 25 Dec 2019

ES Materials and Manufacturing, 2019, 6, 1-2

COVID-19: From Crude Oil to Medical Mask

Qinglong Jiang and Luna Lu

Editorial | published online: 22 Mar 2020

ES Materials and Manufacturing, 2020, 7, 1-3
COVID-19: From Crude Oil to Medical Mask

Improved Manufacturing Processes for Better Materials Properties — From Quantum Dots to Bulk Materials

Qing Hao

Editorial | published online: 17 Jun 2020

ES Materials and Manufacturing, 2020, 8, 1-2
Improved Manufacturing Processes for Better Materials Properties — From Quantum Dots to Bulk Materials

Integrating Artificial Intelligence, Theory, Modeling and Experiments – Perspectives, Challenges, and Opportunities in Materials and Manufacturing

Guang Lin and Na Lu

Editorial | published online: 21 Sep 2020

ES Materials and Manufacturing, 2020, 9, 1-2

Thin Film Materials and Devices

Sandesh R. Jadkar, Deepak Dubal, Dattatray Dhawale, Shoyebmohamad Shaikh, Ravindra Bulakhe, Ying Li, Qinglong Jiang and Habib M. Pathan

Editorial | published online: 08 Dec 2020

ES Materials and Manufacturing, 2020, 10, 1-4
Thin Film Materials and Devices

Continuous Improvement for Manufacturing Techniques: Thin Film Coating and More

Qing Hao

Editorial | published online: 02 Feb 2021

ES Materials and Manufacturing, 2021, 11, 1-2

Compositional Engineering of Halide Perovskites

Qin-Yi Li

Comment | published online: 01 Mar 2021

ES Materials and Manufacturing, 2021, 12, 1-2

Improve Thermal Conductivity of Polymer Composites via Conductive Network

Lilin He

Editorial | published online: 29 Apr 2021

ES Materials and Manufacturing, 2021, 13, 1-2

Self-healing Materials: A Review of Recent Developments

Tingting Song, Bojun Jiang, Yida Li, Zhuohan Ji, Hongling Zhou, Dawei Jiang, Ilwoo Seok, Vignesh Murugadoss, Nan Wen and Henry Colorado

Review Paper | published online: 07 May 2021

ES Materials and Manufacturing, 2021, 14, 1-19
Self-healing Materials: A Review of Recent Developments

Progress on Very/Ultra Low Frequency Mechanical Antennas

Shaolong Yang, Jianchun Xu, Menghao Guo, Bokun Zhang, Chuwen Lan, Haihong Li and Ke Bi

Review Paper | published online: 31 Jul 2021

ES Materials and Manufacturing, 2022, 16, 1-12
Progress on Very/Ultra Low Frequency Mechanical Antennas

High-Precision Three-Dimensional Printing in a Flexible, Low-Cost and Versatile Way: A Review

Jianming Yang, Bin Zhou, Dongxiao Han, Ningxin Cui, Bo Li, Jun Shen, Zhihua Zhang and Ai Du

Review Paper | published online: 09 Sep 2021

ES Materials and Manufacturing, 2022, 15, 1-13
High-Precision Three-Dimensional Printing in a Flexible, Low-Cost and Versatile Way: A Review

Investigations on the Magnetic Properties of Patterned Cobalt Grown on a Mechanically Scratched Copper Substrate 

M. Samee Gadwal, Jupinder Kaur, S. F. Shaikh, P. E. Lokhande, V. L. Mathe, S. D. Sartale and H. M. Pathan
 

Research Paper | published online: 01 Feb 2022

ES Materials and Manufacturing, 2022, 18, 1-9
Investigations on the Magnetic Properties of Patterned Cobalt Grown on a Mechanically Scratched Copper Substrate 

Recent Progress on Optical Frequency Conversion in Nonlinear Metasurfaces and Nanophotonics

Chen Wang, Yongzheng Wen, Jingbo Sun and Ji Zhou

 

Review Paper | published online: 18 Feb 2022

ES Materials and Manufacturing, 2022, 17, 1-13
Recent Progress on Optical Frequency Conversion in Nonlinear Metasurfaces and Nanophotonics

Metal-Organic Frameworks (MOFs): A Promising Candidate for Stimuli-Responsive Drug Delivery

Sk. Jiyaur Rahaman, Arnab Samanta, Mohammad Hedayetullah Mir and Basudeb Dutta

Review Paper | published online: 26 Nov 2022

ES Materials and Manufacturing, 2023, 19, 792
Metal-Organic Frameworks (MOFs): A Promising Candidate for Stimuli-Responsive Drug Delivery

Investigation of Internal Curing Efficacy of Portland Cement Concrete incorporated with Colloidal Nano Silica

Cihang Huang, Yen-Fang Su, Raikhan Tokpatayeva, Tommy Nantung and Na Lu

Research Paper | published online: 07 Dec 2022

ES Materials and Manufacturing, 2023, 20, 798
Investigation of Internal Curing Efficacy of Portland Cement Concrete incorporated with Colloidal Nano Silica

Effect of B-site Disorder on the Electrical Properties of Barium Zirconium Titanate Ceramics Composites

P. K. Bajpai, CRK Mohan, K. N. Singh, Anamika Dwivedi, Milan Hait and Zhanhu Guo

Research Paper | published online: 03 Apr 2023

ES Materials and Manufacturing, 2023, 21, 861
Effect of B-site Disorder on the Electrical Properties of Barium Zirconium Titanate Ceramics Composites

Impact of Hard Template on the Formation of Hierarchically Porous BEA Zeolites and its Catalytic Activity in Transforming Levulinic Acid to Value Added Chemicals

Manikandan Krishnamurthy, and M.Swaminathan

Research Paper | published online: 01 Jul 2023

ES Materials and Manufacturing, 2023, 22, 916
Impact of Hard Template on the Formation of Hierarchically Porous BEA Zeolites and its Catalytic Activity in Transforming Levulinic Acid to Value Added Chemicals

Lithography and 3D Fabrication Processes: A Review

Abhishek Kumar, Swapnendu Narayan Ghosh, Santanu Talukder and Deepak Chopra

Review Paper | published online: 06 Oct 2023

ES Materials and Manufacturing, 2024, 23, 974
Lithography and 3D Fabrication Processes: A Review

Combined Oxidized Bitumen: Technology, Chemistry and Properties

Yerdos Ongarbayev, Bagdat Teltayev, Yerbol Tileuberdi, Zulkhair Mansurov, Cesare O. Rossi, Pietro Calandra, Tulegen Seilkhanov, Ainur Zhambolova and Yerzhan Imanbayev

Research Paper | published online: 30 Dec 2023

ES Materials and Manufacturing, 2024, 24, 1072
Combined Oxidized Bitumen: Technology, Chemistry and Properties

Gamma Radiation-Initiated Miniemulsion Polymerization of Multifunctional Polymer Nanocapsule with Heat Storage, Antibacterial, and UV-Activated Coating Properties

Netnapha Kamlangmak, Preeyaporn Chaiyasat, Thitirat Rattanawongwiboon and Amorn Chaiyasat

Research Paper | published online: 14 Jun 2024

ES Materials and Manufacturing, 2024, 25, 1172
Gamma Radiation-Initiated Miniemulsion Polymerization of Multifunctional Polymer Nanocapsule with Heat Storage, Antibacterial, and UV-Activated Coating Properties

Optical, Structural, Morphological and Electrical Properties of 3,4-Ethylenedioxythiophene: Styrenesulfonate (PEDOT: PSS) Thin Films Embedded with Gold Nanostructures

Ganesh R. Bhand, Maruti V.  Salve,  Shivaji M. Sonawane, Aparna S. Ukarande, Shweta Chaure and Nandu B. Chaure

Research Paper | published online: 08 Aug 2024

ES Materials and Manufacturing, 2024, 26, 1204
Optical, Structural, Morphological and Electrical Properties of 3,4-Ethylenedioxythiophene: Styrenesulfonate (PEDOT: PSS) Thin Films Embedded with Gold Nanostructures

Inclusion Complexation of Excavatin-A with β-Cyclodextrin: Stability, Water Accessibility, and Binding Affinity

Muhammad Ikhlas Abdjan, Nanik Siti Aminah, Alfinda Novi Kristanti, Imam Siswanto, Axl Laurens Lukas Windah, Tin Myo Thant, Muggundha Raoov s/o Ramachandran and Yoshiaki Takaya

Research Paper | published online: 28 Oct 2024

ES Materials and Manufacturing, 2025, 27, 1283
Inclusion Complexation of Excavatin-A with β-Cyclodextrin: Stability, Water Accessibility, and Binding Affinity

Artificial Intelligence-Powered Hybrid Aggnet-xgboost System for Concrete Cube Failure Mode Assessment in Industry 4.0

Meenakshi Somnath Patil, Rajesh Ghongade and Hemant B. Dhonde

Research Paper | published online: 04 Jul 2025

ES Materials and Manufacturing, 2025, 29, 1617
Artificial Intelligence-Powered Hybrid Aggnet-xgboost System for Concrete Cube Failure Mode Assessment in Industry 4.0

Examining the Effect of Age Hardening Process on Surface Quality and Micro-hardness of 7022 Aluminum Alloy 

Hashem Alkhaldi, Safwan Al-Qawabah and Shahnaz Alkhalil

Research Paper | published online: 03 Oct 2025

ES Materials and Manufacturing, 2025, 30, 1764
Examining the Effect of Age Hardening Process on Surface Quality and Micro-hardness of 7022 Aluminum Alloy 

Effect of Deposition Temperature on Morphology and Corrosion Resistance of Electrodeposited Chromium-Graphene Composite Coatings

Daniel M. Zellele, Gulmira Sh. Yar-Mukhamedova and Małgorzata Rutkowska-Gorczyca

Research Paper | published online: 19 Dec 2025

ES Materials and Manufacturing, 2026, 31, 1966
Effect of Deposition Temperature on Morphology and Corrosion Resistance of Electrodeposited Chromium-Graphene Composite Coatings

Laboratory Evaluation of Water Flooding Coupled with Immiscible Nitrogen Injection

Iskander Gussenov, Ahmed N. Al-Dujaili, Marat Bazarbayev, Nurbol Tileuberdi, Moldir Mashrapova, Zhanna Baimurzayeva, Sundos Hameed Mousa and Raikul Smabaeva

Research Paper | published online: 23 Mar 2026

ES Materials and Manufacturing, 2026, 32, 2153
Laboratory Evaluation of Water Flooding Coupled with Immiscible Nitrogen Injection

Microstructural and Mechanical Behavior of Stir Cast Aluminium8011-Boron Carbide-Graphite Hybrid Metal Matrix Composites

Dinesh Chinnasamy Mohan, Sankar Salem Parasuraman, A.V. Balan, Chiranjibi Subedi Y, Vinothkumar R, Yuvanesh R, Diaa S. Metwally, Santosh Kumar Sahu and Mohammed Aman

Research Paper | published online: 06 Jul 2026

ES Materials and Manufacturing, 2026, 33, 2392
Microstructural and Mechanical Behavior of Stir Cast Aluminium8011-Boron Carbide-Graphite Hybrid Metal Matrix Composites

Development of MoS2 Nanosheets Embedded Nickel Composite Coating and its Mechanical Properties

Antony Joseph, Mugilan Narayanasamy, Balakrishnan Kirubasankar and Subramania Angaiah

Research Paper | published online: 29 Oct 2018

ES Materials and Manufacturing, 2018, 2, 2-8
Development of MoS2 Nanosheets Embedded Nickel Composite Coating and its Mechanical Properties

Carbon and Boron Nitride Nanotubes: Structure, Property and Fabrication

Chang Liu, Qichen Fang, Daoyuan Wang, Chao Yan, Faqian Liu, Ning Wang, Zhanhu Guo and Qinglong Jiang

Review Paper | published online: 14 Jan 2019

ES Materials and Manufacturing, 2019, 3, 2-15
Carbon and Boron Nitride Nanotubes: Structure, Property and Fabrication

Phonon Transport within Periodic Porous Structures - From Classical Phonon Size Effects to Wave Effects

Yue Xiao, Qiyu Chen, Dengke Ma, Nuo Yang and Qing Hao

Review Paper | published online: 09 Sep 2019

ES Materials and Manufacturing, 2019, 5, 2-18
Phonon Transport within Periodic Porous Structures - From Classical Phonon Size Effects to Wave Effects

A Review on Durability of Alkali-activated System from Sustainable Construction Materials to Infrastructures

Wengui Li, Zhuo Tang, Vivian W. Y. Tam, XinYu Zhao and Kejin Wang

Review Paper | published online: 06 Feb 2019

ES Materials and Manufacturing, 2019, 4, 2-19
A Review on Durability of Alkali-activated System from Sustainable Construction Materials to Infrastructures

A New Preparation Method of Copper Oxide/Aluminium Oxide Nanocomposites with Enhanced Anti-friction Properties

Wei Li, Mingtao Wang, Qiang Chen, Wenjuan Zhang and Ting Luo

Research Paper | published online: 21 Jul 2022

ES Materials and Manufacturing, 2023, 19, 692
A New Preparation Method of Copper Oxide/Aluminium Oxide Nanocomposites with Enhanced Anti-friction Properties

Influence of Chemical Bath Deposition Temperatures on Cadmium Sulphide Thin Film and Photosensor Application

Almas Z. Shaikh, Shital D. Satpute, Janardhan R. Gadde, Ranjit R. Hawaldar and Kakasaheb C. Mohite

Research Paper | published online: 11 Feb 2023

ES Materials and Manufacturing, 2023, 20, 819
Influence of Chemical Bath Deposition Temperatures on Cadmium Sulphide Thin Film and Photosensor Application

A Review  on Nanomaterials for Drug Delivery Systems and Application of Carbon based Nanomaterials

Anil Kumar Bhardwaj, Amit Kant Pandit,  Arvind Rehalia,  Vikram Singh and Ruchi Sharma

Review Paper | published online: 26 Feb 2023

ES Materials and Manufacturing, 2023, 21, 824
A Review  on Nanomaterials for Drug Delivery Systems and Application of Carbon based Nanomaterials

Core-Shell Structured Polyaniline (PANI) – Manganese Dioxide (MnO2) Nanocomposites as an Electrochemical Sensor for Detection of Emamectin Benzoate

Supriya Vyas, Ashutosh Shukla, Sugam Shivhare, Ratnesh Das and R. Venkatesh

Research Paper | published online: 31 Oct 2023

ES Materials and Manufacturing, 2024, 23, 1002
Core-Shell Structured Polyaniline (PANI) – Manganese Dioxide (MnO2) Nanocomposites as an Electrochemical Sensor for Detection of Emamectin Benzoate

Electric Discharge Machining of Aluminium Silicon-Carbide Composite and Optimization of Process Parameters

B. Harinesh, U. Arunachalam, D. Ommurugadhasan and M. P. Jenarthanan

Research Paper | published online: 03 Jan 2024

ES Materials and Manufacturing, 2024, 24, 1076
Electric Discharge Machining of Aluminium Silicon-Carbide Composite and Optimization of Process Parameters

Optimizing Oil Recovery by Low-Pressure Nitrogen Injection: An Experiment Case Study

Nurbol Tileuberdi, Ahmed N. AL-Dujaili, Moldir Mashrapova, Kuanysh Togizov, Miras Sanatbekov and Auyelkhan Yergali

Research Paper | published online: 07 Jul 2024

ES Materials and Manufacturing, 2024, 25, 1189
Optimizing Oil Recovery by Low-Pressure Nitrogen Injection: An Experiment Case Study

Enhancing Flame Retardancy of Polyurethane Foam with Montmorillonite-Based Nanocoatings

Dongqiao Zhang, Jingjing Liu, Brandon L. Williams, Zaili Hou, Benjamin J. Lofink, Victor H. Santos, Elaina M. Becher, Saral B. Shrestha, Zain Nasir, Harsh Patel, Anthony Partyka, Xiaohong Peng and Luyi Sun

Research Paper | published online: 18 Sep 2024

ES Materials and Manufacturing, 2024, 26, 1228
Enhancing Flame Retardancy of Polyurethane Foam with Montmorillonite-Based Nanocoatings

Sintered Aluminum-Zeolite Composites for Structural Applications made by Powder Metallurgy

Henry A. Colorado, Juan M. Meza and Jhonathan A. Salazar

Research Paper | published online: 26 Nov 2024

ES Materials and Manufacturing, 2025, 27, 1326
Sintered Aluminum-Zeolite Composites for Structural Applications made by Powder Metallurgy

Macroscopic Elastic Moduli of Randomly Ellipse Inclusions with Surface-Stress Imperfect Interfaces 

Van-Luat Nguyen

Research Paper | published online: 07 Feb 2025

ES Materials and Manufacturing, 2025, 28, 1405
Macroscopic Elastic Moduli of Randomly Ellipse Inclusions with Surface-Stress Imperfect Interfaces 

Vacuum Residue as Antioxidant and Rejuvenator Agent for Bitumen

Valeria Loise, Michele Porto, Leonardo Bruno, Pietro Calandra, Bagdat Teltayev, Cesare Oliviero Rossi and Paolino Caputo

Research Paper | published online: 26 Feb 2025

ES Materials and Manufacturing, 2025, 28, 1425
Vacuum Residue as Antioxidant and Rejuvenator Agent for Bitumen

Correlation between Blanking Clearance and Microstructural Evolution in Sheared Zones of Quench and Partitioning (Q&P) Steels

Bingtao Tang, Shulei Sun, Enkai Dai, Depeng Shen and Guoqiang Liu 

Research Paper | published online: 04 Jul 2025

ES Materials and Manufacturing, 2025, 29, 1618
Correlation between Blanking Clearance and Microstructural Evolution in Sheared Zones of Quench and Partitioning (Q&P) Steels

Enhancing Cement Mortar Performance for Construction and Oil Well Applications using Fiber Reinforcement

G. M. Efendiyev, G. Zh. Moldabayeva, Sh. R. Tuzelbayeva, N. S. Buktukov, A. L. Kozlovskiy, N. Tileuberdi and O. G. Kirisenko

Research Paper | published online: 03 Oct 2025

ES Materials and Manufacturing, 2025, 30, 1771
Enhancing Cement Mortar Performance for Construction and Oil Well Applications using Fiber Reinforcement

Stabilizing Porous-Silicon Photocathodes via Nickel/Nickel Oxide Co-Catalyst and Benzotriazole Passivation

Assel Rakymbekova, Yerbolat Magazov, Vladislav Kudryashov, Niyazbek Ibrayev, Salimgerey Adilov and Nurxat Nuraje

Research Paper | published online: 22 Oct 2025

ES Materials and Manufacturing, 2025, 30, 1829
Stabilizing Porous-Silicon Photocathodes via Nickel/Nickel Oxide Co-Catalyst and Benzotriazole Passivation

Predicting Sand Production and Porosity in Sandpacks Using Computer Tomography Imaging and Convolutional Neural Network-Based Image Segmentation

Kamila Batkuldinova, Michael Yong Zhao, Minh Nguyen, Olzhas Sayakov, Bakhtiyar Kalzhan, Ainash Shabdirova, Sonny Irawan and Dongming Wei

Research Paper | published online: 17 Dec 2025

ES Materials and Manufacturing, 2026, 31, 1959
Predicting Sand Production and Porosity in Sandpacks Using Computer Tomography Imaging and Convolutional Neural Network-Based Image Segmentation

3D Printing of Contact Lenses: A Bibliometric Analysis from 2012 to 2025

Ahmed Desoky and Haider Butt

Review Paper | published online: 18 Mar 2026

ES Materials and Manufacturing, 2026, 32, 2144
3D Printing of Contact Lenses: A Bibliometric Analysis from 2012 to 2025

Investigation of the Mechanical and Tribological Properties of Aluminum 6061 Alloy and Titanium Diboride Reinforced Metal Matrix Composites

C. Darshan, H. R. Hemaraju, B. T. Ramesh and N. Sudharshan

Research Paper | published online: 01 Jun 2026

ES Materials and Manufacturing, 2026, 33, 2318
Investigation of the Mechanical and Tribological Properties of Aluminum 6061 Alloy and Titanium Diboride Reinforced Metal Matrix Composites

New Functions of Polyaniline

Hongbo Gu, Hongyuan Zhang, Chong Gao, Chaobo Liang, Junwei Gu and Zhanhu Guo

Review Paper | published online: 30 Sep 2018

ES Materials and Manufacturing, 2018, 1, 3-12
New Functions of Polyaniline

Development and Application of Hot Embossing in Polymer Processing: A Review

Jingyao Sun, Jian Zhuang, Ying Liu, Hong Xu, Jesse Horne, Evan K. Wujcik, Haichao Liu, Jong E. Ryu, Daming Wu and Zhanhu Guo

Review Paper | published online: 09 Dec 2019

ES Materials and Manufacturing, 2019, 6, 3-17
Development and Application of Hot Embossing in Polymer Processing: A Review

Overview of Injection Molding Technology for Processing Polymers and Their Composites

Hongbo Fu, Hong Xu, Ying Liu, Zhaogang Yang, S. Kormakov, Daming Wu and Jingyao Sun

Review Paper | published online: 22 May 2020

ES Materials and Manufacturing, 2020, 8, 3-23
Overview of Injection Molding Technology for Processing Polymers and Their Composites

Mesoscopic Finite Element Simulation on the Interfacial Bonding Performance of Functionally Gradient Concrete

Jianmin Wang, Yitao Fan, Chengfeng Zhu, Shuang Lu and Junzhe Liu

Research Paper | published online: 28 Jun 2020

ES Materials and Manufacturing, 2020, 9, 3-11
Mesoscopic Finite Element Simulation on the Interfacial Bonding Performance of Functionally Gradient Concrete

A Review of Application and Development Trends in Ultrasonic Motors

Xiaoniu Li, Zhiyi Wen, Botao Jia, Teng Cao, De Yu and Dawei Wu

Review Paper | published online: 03 Dec 2020

ES Materials and Manufacturing, 2021, 12, 3-16
A Review of Application and Development Trends in Ultrasonic Motors

Research Progress on Catalytic Pyrolysis and Reuse of Waste Plastics and Petroleum Sludge

Duo Pan, Fengmei Su, Hu Liu, Chuntai Liu, Ahmad Umar, L. Castañeda, Hassan Algadi, Caiyun Wang and Zhanhu Guo

Review Paper | published online: 31 Jan 2021

ES Materials and Manufacturing, 2021, 11, 3-15
Research Progress on Catalytic Pyrolysis and Reuse of Waste Plastics and Petroleum Sludge

Graphene Oxide-based Nanomaterials for Uranium Adsorptive Uptake

Hongjuan Liu and Yuanbing Mao

Review Paper | published online: 15 Apr 2021

ES Materials and Manufacturing, 2021, 13, 3-22
Graphene Oxide-based Nanomaterials for Uranium Adsorptive Uptake

Zinc Substituted Keggin Type Polyoxometalate as an Effective Catalyst for the Oxidative Desulfurization of Dibenzothiophene by Hydrogen Peroxide as Oxidant

Hedayat Haddadi, Elahe Mokhtari, Mostafa Riahi Farsani and Ahmad Jamali Moghadam

Research Paper | published online: 27 Aug 2022

ES Materials and Manufacturing, 2023, 19, 766
Zinc Substituted Keggin Type Polyoxometalate as an Effective Catalyst for the Oxidative Desulfurization of Dibenzothiophene by Hydrogen Peroxide as Oxidant

Scalable, Low-Cost Fabrication of Selective Solar Absorber by Ultrasonic Spray Coating

Ye Seul Kwon, Yang Li and Baoling Huang

Research Paper | published online: 11 Feb 2023

ES Materials and Manufacturing, 2023, 20, 812
Scalable, Low-Cost Fabrication of Selective Solar Absorber by Ultrasonic Spray Coating

Dielectric Properties and Thermal Conductivity of Polyvinylidene Fluoride Synergistically Enhanced with Silica@Multi-walled Carbon Nanotubes and Boron Nitride

Zijian Wu, Xuefei Wang, Sri Hari Kumar Annamareddy, Shunying Gao, Qi Xu, Hassan Algadi, Deepak Sridhar, Priyanka Wasnik, Ben Bin Xu, Ling Weng, and Zhanhu Guo

Research Paper | published online: 19 Mar 2023

ES Materials and Manufacturing, 2023, 22, 847
Dielectric Properties and Thermal Conductivity of Polyvinylidene Fluoride Synergistically Enhanced with Silica@Multi-walled Carbon Nanotubes and Boron Nitride

Micro/Nanoscale 3-Dimensional Fabrication using Multi-Photons Polymerization: Review

Ilwoo Seok, Dan Kilula and Zhanhu Guo

Review Paper | published online: 20 Mar 2023

ES Materials and Manufacturing, 2023, 21, 849
Micro/Nanoscale 3-Dimensional Fabrication using Multi-Photons Polymerization: Review

Development and Engineering Application of Cement-Based Full Length Anchoring Material

Shunjie Huang, Xiangrui Meng, Guangming Zhao and Zhixi Liu

Research Paper | published online: 12 Dec 2023

ES Materials and Manufacturing, 2024, 23, 1051
Development and Engineering Application of Cement-Based Full Length Anchoring Material

Comprehensive Investigation of Pyrolysis Products from Coal Dust in Southern Kazakhstan: An Experimental Study

Yermek Aubakirov, Zheneta Tashmukhambetova, Yerzhan Imanbayev, Nargiza Nurtazina, Beibit Kenzheyev and Kainaubek Toshtay

Research Paper | published online: 17 Apr 2024

ES Materials and Manufacturing, 2024, 24, 1123
Comprehensive Investigation of Pyrolysis Products from Coal Dust in Southern Kazakhstan: An Experimental Study

Research Progress on Preparation and Application of  Sodium Alginate Aerogel

Lilin Xiang, Shuaimin Zheng, Junting Lei, Duo Pan, Sichao Li, Jingxuan Wang, Yaming Wang and Chuntai Liu

Review Paper | published online: 29 Aug 2024

ES Materials and Manufacturing, 2024, 25, 1215
Research Progress on Preparation and Application of  Sodium Alginate Aerogel

In Vitro Evaluation of Titanium Dioxide (TiO2) Nanoparticles for Enhanced Antibacterial and Cytotoxicity Activities

Maya Khater, Gauri Kulkarni and Sagar Khater

Research Paper | published online: 10 Oct 2024

ES Materials and Manufacturing, 2024, 26, 1266
In Vitro Evaluation of Titanium Dioxide (TiO2) Nanoparticles for Enhanced Antibacterial and Cytotoxicity Activities

Effect of Precursor Salt Variation on Structural, Morphological, and Optoelectronic Properties of Zinc Oxide Thin Films Deposited via Sol-Gel Spin Coating

Kishor More, Anil Rakshe, Sudam Chavhan, Sachin Nandre, Rajendra Ahire and Anup More

Research Paper | published online: 10 Dec 2024

ES Materials and Manufacturing, 2025, 27, 1342
Effect of Precursor Salt Variation on Structural, Morphological, and Optoelectronic Properties of Zinc Oxide Thin Films Deposited via Sol-Gel Spin Coating

Comparative Analysis of Machine Learning Models for Monitoring 4-Dimensional Printed Smart Hydrogel Wearable Thermochromic Photonics Devices

Sujatha Hariharan, Mohamed Elnemr, Said El Turk and Haider Butt

Research Paper | published online: 10 Apr 2025

ES Materials and Manufacturing, 2025, 28, 1465
Comparative Analysis of Machine Learning Models for Monitoring 4-Dimensional Printed Smart Hydrogel Wearable Thermochromic Photonics Devices

Regularities of Unsteady-State Creep of Asphalt Concrete 

Alibay Iskakbayev, Bagdat Teltayev, Yerbol Aitbayev and Azamat Zhaisanbayev

Research Paper | published online: 02 Jul 2025

ES Materials and Manufacturing, 2025, 29, 1607
Regularities of Unsteady-State Creep of Asphalt Concrete 

Phosphating of Carbon Steel in Solutions based on Technogenic Raw Materials 

Sh. N. Kubekova, V. I. Kapralova, A. S. Raimbekova, A. Dalbanbay, Zh. Kuli, A. B. Ibragimov and A. Mukhanov 

Research Paper | published online: 03 Oct 2025

ES Materials and Manufacturing, 2025, 30, 1765
Phosphating of Carbon Steel in Solutions based on Technogenic Raw Materials 

Dual-Model Synergy-Driven Precise Fabrication of Polystyrene Based on Generalized Additive and Machine Learning Models

Xiaocui Wu, Kan Chen, Xiaogang Deng, Xianfeng Tan, Zhujuan Shao and Zhaojie Cui

Research Paper | published online: 13 Dec 2025

ES Materials and Manufacturing, 2026, 31, 1942
Dual-Model Synergy-Driven Precise Fabrication of Polystyrene Based on Generalized Additive and Machine Learning Models

Computational Analysis and Design of a Triply Periodic Minimal Surface-Based Biomimetic Femoral Stem Implant 

M. N. Shahid, S. Rasheed, M. U. Shahid, A. Mehboob and I. Barsoum

Research Paper | published online: 18 Mar 2026

ES Materials and Manufacturing, 2026, 32, 2145
Computational Analysis and Design of a Triply Periodic Minimal Surface-Based Biomimetic Femoral Stem Implant 

Machine-Learning Predictions of Compressive Strength of Seawater-Mixed Concrete Using Ensemble and Non-Ensemble Models

Duangduan Chaiyaveij, Fahad Ahmed, Adnan Nawaz, Panumas Saingam, Preeda Chaimahawan, Qudeer Hussain and Satish Paudel

Research Paper | published online: 11 Aug 2026

ES Materials and Manufacturing, 2026, 33, 2460
Machine-Learning Predictions of Compressive Strength of Seawater-Mixed Concrete Using Ensemble and Non-Ensemble Models

Recent Advances in Thermal Interface Materials

Yongcun Zhou, Siqi Wu, Yuheng Long, Pengli Zhu, Feixiang Wu, Feng Liu, Vignesh Murugadoss, Williams Winchester, Amit Nautiyal, Zhe Wang and Zhanhu Guo

 

Review Paper | published online: 08 Mar 2020

ES Materials and Manufacturing, 2020, 7, 4-24
Recent Advances in Thermal Interface Materials

Self-assembly Study of Complex Topological Structure Constructing from Telechelic Polymer Systems

Hui Li, Zhenyu Wang, Yuanyuan Wei, Ning Wang, Kaiming Gao, Xunhua Liao, Haitao Zhao, Long Zhang, Zhenbin Chen, Qiaoli Lin, Dongdong Hu, Juan M Ruso and Zhen Liu

Research Paper | published online: 24 Sep 2022

ES Materials and Manufacturing, 2023, 19, 778
Self-assembly Study of Complex Topological Structure Constructing from Telechelic Polymer Systems

Flexible, Programable Sensing System with poly(AAm-HEMA-SA) for Human Motion Detection

Chenggui Yao, Weiwei Zhao, Li Liu, Qimin Liu and Junfeng Li

Research Paper | published online: 11 Feb 2023

ES Materials and Manufacturing, 2023, 20, 818
Flexible, Programable Sensing System with poly(AAm-HEMA-SA) for Human Motion Detection

In Silico Studies on Triazole Derivatives as Corrosion Inhibitors on Mild Steel in Acidic Media

Ramzi T. T. Jalgham, Gourisankar Roymahapatra, Mrinal Kanti Dash, O. Dagdag and Lei Guo

Research Paper | published online: 25 Apr 2023

ES Materials and Manufacturing, 2023, 21, 867
In Silico Studies on Triazole Derivatives as Corrosion Inhibitors on Mild Steel in Acidic Media

La2CuO4 Electrode Material for Low Temperature Solid Oxide Fuel Cells

Mazhyn K. Skakov, Sana K. Kabdrakhmanova, Kydyrmolla Akatan, Almira M. Zhilkashinova, Esbol Shaimardan,  Madiyar M. Beisebekov, Kantai Nurgamit, Viktor V. Baklanov, Yerbolat T. Koyanbayev, Arman Zh Miniyazov, Igor A. Sokolov and Nurya M. Mukhamedova

Research Paper | published online: 03 Oct 2023

ES Materials and Manufacturing, 2023, 22, 969
La2CuO4 Electrode Material for Low Temperature Solid Oxide Fuel Cells

Local Natural Graphite as a Promising Raw Material for the Production of Thermally Reduced Graphene-Like Films

Тilek Kuanyshbekov, Nazim Guseinov, Bayan Kurbanova,  Renata Nemkaeva, Kydyrmolla Akаtаn, Zhandos Tolepov, Malika Tulegenova, Madi Aitzhanov, Elzhas Zhasasynov and Sabu Thomas

Research Paper | published online: 29 Oct 2023

ES Materials and Manufacturing, 2024, 23, 1000
Local Natural Graphite as a Promising Raw Material for the Production of Thermally Reduced Graphene-Like Films

Effect of Seawater Absorption on Mechanical and Flexural Properties of Pineapple Leaf Fiber Reinforced Epoxy Nanoclay Composites

Amar Murthy Ambekar, K. Muralishwara, Jamaluddin Hindi, Subash Acharya, Nithesh Naik, B. M. Gurumurthy, Pavan Hiremath and Kasirajan Kasipandian

Research Paper | published online: 22 Dec 2023

ES Materials and Manufacturing, 2023, 22, 1067
Effect of Seawater Absorption on Mechanical and Flexural Properties of Pineapple Leaf Fiber Reinforced Epoxy Nanoclay Composites

Compensation Manipulator for Concrete 3D Printing Based on the CONPrint3D

Azamat Mustafa, Florian Storch, Kaiyrov Rustem, Paul Plashnik, Frank Will, Sagyntay Mukhagali, Zhumadil Baigunchekov and Volker Waurich

Research Paper | published online: 20 Apr 2024

ES Materials and Manufacturing, 2024, 24, 1127
Compensation Manipulator for Concrete 3D Printing Based on the CONPrint3D

Examining and Modelling the Effects of 3D Fused Deposition Parameters

Shafiq Alsa’di, Moudar Zgoul, Wafa’ H. AlAlaween and Safwan M. Al-Qawabah

Research Paper | published online: 28 Jul 2024

ES Materials and Manufacturing, 2024, 25, 1197
Examining and Modelling the Effects of 3D Fused Deposition Parameters

Exploring Gas Sensing Applications and Characterization of Nanostructured Magnesium Orthostannate Synthesized Through Hydrothermal Method

Sagar H. Mane, Tushar S. Wagh, Gotan H. Jain and Madhavrao K. Deore

Research Paper | published online: 28 Aug 2024

ES Materials and Manufacturing, 2024, 26, 1247
Exploring Gas Sensing Applications and Characterization of Nanostructured Magnesium Orthostannate Synthesized Through Hydrothermal Method

Microwave Combustion Synthesis and Third Order Nonlinear Optical Traits and Optical Limiting Behavior of Sr2+ Ion Doped ZnAl2O4 Nanoparticles

Sofia Nirmala Tharsiuse, Iyandurai Natesan, Jayaprakash Kaliyamurthy, Yuvaraj Selvarathinam and Sundararajan Murugesan

Research Paper | published online: 07 Feb 2025

ES Materials and Manufacturing, 2025, 27, 1404
Microwave Combustion Synthesis and Third Order Nonlinear Optical Traits and Optical Limiting Behavior of Sr2+ Ion Doped ZnAl2O4 Nanoparticles

Multifunctional Nanocellulose Hydrogels Featuring Superior Injectability, Self-Healing, Adhesion, and Near-infrared Photothermal Antibacterial Activity

Lu Tang, Dongjie Shi, Yewen Shen, Houjuan Qi, Ziwen Liu, Lifei Yang, Zhonghua Chen, Kainaubek Toshtay, Zhexenbek Toktarbay, Hassan Algadi and Zhanhua Huang

Research Paper | published online: 22 May 2025

ES Materials and Manufacturing, 2025, 28, 1522
Multifunctional Nanocellulose Hydrogels Featuring Superior Injectability, Self-Healing, Adhesion, and Near-infrared Photothermal Antibacterial Activity

Electrochemical Sensor based on Silicon Carbide and Coke-Derived Carbon Nanocomposites for Sensitive Detection of Lead Ions

Zhazira Mukatayeva, Yrysgul Bakytkarim, Wulipan Nuerbaheti, Yerbol Tileuberdi, Nurgul Shadin, Zhanar Assirbayeva and Leilya Zhussupova

Research Paper | published online: 29 Jul 2025

ES Materials and Manufacturing, 2025, 29, 1653
Electrochemical Sensor based on Silicon Carbide and Coke-Derived Carbon Nanocomposites for Sensitive Detection of Lead Ions

From Gold Mining Waste to Functional Sorbents: Structural and Compositional Insights into Copper Adsorption Efficiency

Arailym Kalymbet, Sholpan Kubekova, Victoria Kapralova and Silviya Lavrova

Research Paper | published online: 07 Oct 2025

ES Materials and Manufacturing, 2025, 30, 1777
From Gold Mining Waste to Functional Sorbents: Structural and Compositional Insights into Copper Adsorption Efficiency

Rose Bengal-Sensitized Bi-Layered Zinc Oxide-Niobium Pentoxide Photo-Anode for Dye-Sensitized Solar Cells

Suhail A. A. R. Sayyed, Niyamat I. Beedri, Vishal M. Kasab, Almas M. Mujawar, Shoyebmohamad F. Shaikh, Shashikant P. Patole and Habib M. Pathan 

Research Paper | published online: 17 Dec 2025

ES Materials and Manufacturing, 2026, 31, 1960
Rose Bengal-Sensitized Bi-Layered Zinc Oxide-Niobium Pentoxide Photo-Anode for Dye-Sensitized Solar Cells

Electrical Conductivity of Polyaniline/Zinc Oxide Nanocomposites: Effect of Zinc Oxide Nanoparticle Content, Morphology and Laser Irradiation

Muzaffar Makhkamov, Islomjon Khudoyberdiev, Mavluda Khidirova, Iroda Gulomova, Nasiba Khodjayeva, Nigora Abdullaeva, Odiljon Abdurakhmonov, Nurgul Zhumanova, Nazgul Akimbayeva and Sri Hari Kumar Annamareddy

Research Paper | published online: 30 Mar 2026

ES Materials and Manufacturing, 2026, 32, 2163
Electrical Conductivity of Polyaniline/Zinc Oxide Nanocomposites: Effect of Zinc Oxide Nanoparticle Content, Morphology and Laser Irradiation

Emerging Trends of Absorption-Dominated Materials for Electromagnetic Interference Shielding

Dawei Zhang, Baosong Li, Abdallah Kamal, Xiaoning Fu, Haider Butt and Lianxi Zheng

Review Paper | published online: 10 Sep 2026

ES Materials and Manufacturing, 2026, 33, 2522
Emerging Trends of Absorption-Dominated Materials for Electromagnetic Interference Shielding

Study of Structural, Optical, Morphology and Photoelectrochemical Properties of Melanin Sensitized TiO2 Thin Films Prepared by Chemical Bath Deposition Method

Priti Vairale, Vidhika Sharma, Ashish Waghmare, Pratibha Shinde, Subhash Pandharkar, Ashvini Punde, Vidya Doiphode, Yogesh Hase, Rahul Aher, Shruthi Nair, Vijaya Jadkar, Nilesh Patil, Sachin Rondiya, Pandit Shelke, Mohit Prasad and Sandesh Jadkar

Research Paper | published online: 27 Nov 2020

ES Materials and Manufacturing, 2020, 10, 5-15
Study of Structural, Optical, Morphology and Photoelectrochemical Properties of Melanin Sensitized TiO2 Thin Films Prepared by Chemical Bath Deposition Method

Flexible and Biocompatible Polystyrene/Multi-walled Carbon Nanotubes Films with High Permittivity and Low Loss

Chong Wang, Zheng Zhang, Xiaohui Xu, Haikun Wu, Dechun Liu, Shuwei Meng, Guixian Li, Yulei Wei, Xiaomin Li, Guomin Wang, Peitao Xie and Chunzhao Liu

Research Paper | published online: 24 Nov 2022

ES Materials and Manufacturing, 2023, 19, 791
Flexible and Biocompatible Polystyrene/Multi-walled Carbon Nanotubes Films with High Permittivity and Low Loss

All-Optical Quaternary Logic Circuits with Bacteriorhodopsin Coated Microcavities

Mohit Prasad, Sanjivani Sonar, Mahadev Kadam, Dattatraya Anarse, Yogesh Hase, Ashish Waghmare and Sandesh Jadkar

Research Paper | published online: 13 Mar 2023

ES Materials and Manufacturing, 2023, 20, 835
All-Optical Quaternary Logic Circuits with Bacteriorhodopsin Coated Microcavities

Transparent Conducting Gallium-Doped Zinc Oxide Thin Films on Glass Substrate for Optoelectronic Device Applications

Himadri Sekhar Das, Santanu Mishra, Mrinal Kanti Dash, Prasanta Kumar Nandi, Subir Kumar Maity, Debnarayan Khatua, Anindita Chatterjee, Zhanhu Guo, Ben Bin Xu, and Gourisankar Roymahapatra

Research Paper | published online: 15 Mar 2023

ES Materials and Manufacturing, 2023, 22, 841
Transparent Conducting Gallium-Doped Zinc Oxide Thin Films on Glass Substrate for Optoelectronic Device Applications

Enhanced Oil Recovery: Techniques, Strategies, and Advances

Damir Karimov and Zhexenbek Toktarbay

Review Paper | published online: 04 Nov 2023

ES Materials and Manufacturing, 2024, 23, 1005
Enhanced Oil Recovery: Techniques, Strategies, and Advances

Production of Rhenium in the Form of Ammonium Perrhenate from Anthropogenic Waste of Copper Production

Zhumakynbay Nazigul, Zharmenov Adiyar, Ondiris Bagzhan, Berdikulova Feruza, Khamidulla Aigerim, Zharmenov Addurassu, Terlikbayeva Alma and Sydykov Alimgazy

Research Paper | published online: 28 Nov 2023

ES Materials and Manufacturing, 2024, 23, 1006
Production of Rhenium in the Form of Ammonium Perrhenate from Anthropogenic Waste of Copper Production

Efficiency of Using Nitride and Oxy-Nitride Coatings for Protection against High-Temperature Oxidation and Embrittlement of the Surface Layer of Steel Structures

G. Zh. Moldabayeva, А. L. Kozlovskiy, E. I. Kuldeyev, А. Kh. Syzdykov and N. S. Buktukov

Research Paper | published online: 20 Apr 2024

ES Materials and Manufacturing, 2024, 24, 1129
Efficiency of Using Nitride and Oxy-Nitride Coatings for Protection against High-Temperature Oxidation and Embrittlement of the Surface Layer of Steel Structures

Silk Dyeing with Anthocyanin Dye Extract from Melastoma malabathricum L. Fruits Using Metal Oxides and Reducing Agents to Ameliorate Photo–Fading

Montra Chairat, Phattaraporn Thongsamai, Thamonwan Meephun, Suwijak Pantanit, Siritron Samosorn, Warayuth Sajomsang, Pattarapond Gonil and John B Bremner

Research Paper | published online: 20 Jul 2024

ES Materials and Manufacturing, 2024, 25, 1213
Silk Dyeing with Anthocyanin Dye Extract from Melastoma malabathricum L. Fruits Using Metal Oxides and Reducing Agents to Ameliorate Photo–Fading

Using Oil Sludge as a Rejuvenator for Reclaimed Asphalt Pavement: Improving Sustainability in Road Maintenance

Gulzat Aitkaliyeva, Seytkhan Azat, Ilyas Baidullayev, Rauash Mangazbayeva, Aigul Amitova, Madeniyet Yelubay, Gaukhar Toleutay, Aiganym Ismailova, Ilyas Orazymbek and Munziya Abutalip

Research Paper | published online: 30 Oct 2024

ES Materials and Manufacturing, 2024, 26, 1291
Using Oil Sludge as a Rejuvenator for Reclaimed Asphalt Pavement: Improving Sustainability in Road Maintenance

The Technology of Foam-Glass Building Materials for Heat-Insulating Purposes Using Amorphous-Silica Rocks

Bibol Yermuratovich Zhakipbayev, Nurkhat Kuandykovich Zhakiyev, Bekzat Zatybekuly Abdikadyr, Zhangazy Nurzhanovich Moldamuratov and Kanagat Omirbekovich Abekov

Research Paper | published online: 14 Jan 2025

ES Materials and Manufacturing, 2025, 27, 1379
The Technology of Foam-Glass Building Materials for Heat-Insulating Purposes Using Amorphous-Silica Rocks

Effects of the Zirconia-Alumina Composite Ceramics with Varying Compositions on Resistance to Helium Swelling

Inesh E. Kenzhina, Artem L. Kozlovskiy, Aktolkyn Tolenova, Meiram Begentayev and Saulet Askerbekov

Research Paper | published online: 06 Apr 2025

ES Materials and Manufacturing, 2025, 28, 1463
Effects of the Zirconia-Alumina Composite Ceramics with Varying Compositions on Resistance to Helium Swelling

Influence of Thermal and Thermomechanical Treatment on the Mechanical Properties of the Fe-C-Si-Mn-Cr-Ni-Mo System Armor Grade Steel

Laura Mustafa, Ilyas Ablakatov, Berdiyar Baiserikov, Mohammed Meiirbekov, Nurmakhan Yesbolov, Ablaikhan Baigonov, Indira Tashmukhanbetova and Arman Kulbekov

Research Paper | published online: 09 Oct 2025

ES Materials and Manufacturing, 2025, 30, 1787
Influence of Thermal and Thermomechanical Treatment on the Mechanical Properties of the Fe-C-Si-Mn-Cr-Ni-Mo System Armor Grade Steel

Progress in Ceramic Reinforced Dental Resins for Long-Term Restorations using Vat Polymerization Additive Manufacturing

Alejandro Ossa Ochoa and Henry A. Colorado

Review Paper | published online: 22 Nov 2025

ES Materials and Manufacturing, 2026, 31, 1895
Progress in Ceramic Reinforced Dental Resins for Long-Term Restorations using Vat Polymerization Additive Manufacturing

Enhancing Performance of Mortars Reinforced with Waste Human Hair Fibers for Unconfined Masonry Structures

Lina Chica, Joham Moya, John Mario García, Ricardo Bonett and Henry Colorado

Research Paper | published online: 09 Mar 2026

ES Materials and Manufacturing, 2026, 32, 2120
Enhancing Performance of Mortars Reinforced with Waste Human Hair Fibers for Unconfined Masonry Structures

Advanced X-Ray Characterization of Modified Sulfur Cake from Sulfuric Acid Production Residues

Yerbol Tileuberdi, Yerdos Ongarbayev, Aigul Baimagambetova, Ernar Kanzharkan, Yerzhan Imanbayev, Ainur Zhambolova, Aksaule Kydyrali and Cesare Oliviero Rossi

Research Paper | published online: 20 Jul 2026

ES Materials and Manufacturing, 2026, 33, 2422
Advanced X-Ray Characterization of Modified Sulfur Cake from Sulfuric Acid Production Residues

In Quest of New Energy Material: 3D Mn (II)-Coordination Polymer, the Schottky Device and Theoretical Interpretation

Manik Shit, Pubali Das, Sukanya Paul, Arnab Samnta, Sk. Mohammad Aziz, Partha Pratim Ray and Chittaranjan Sinha

Research Paper | published online: 26 Dec 2022

ES Materials and Manufacturing, 2023, 19, 804
In Quest of New Energy Material: 3D Mn (II)-Coordination Polymer, the Schottky Device and Theoretical Interpretation

Influence of Electrospinning Voltage on the Diameter and Properties of 1-dimensional Zinc Oxide Nanofiber

Harshada Mhetre, Yuvraj Kanse and Yogesh Chendake

Research Paper | published online: 15 Mar 2023

ES Materials and Manufacturing, 2023, 20, 838
Influence of Electrospinning Voltage on the Diameter and Properties of 1-dimensional Zinc Oxide Nanofiber

Effect of Operational Parameters on Fouling of 6061 Aluminum Alloy Under Dynamic Conditions

Lavanya Mulky and Padmalatha Rao

Research Paper | published online: 19 May 2023

ES Materials and Manufacturing, 2023, 21, 893
Effect of Operational Parameters on Fouling of 6061 Aluminum Alloy Under Dynamic Conditions

A Review on Nitrogen Flooding for Enhanced Oil Recovery

Nurbol Tileuberdi, Moldir Mashrapova, and Zhexenbek Toktarbay

Review Paper | published online: 03 Oct 2023

ES Materials and Manufacturing, 2023, 22, 968
A Review on Nitrogen Flooding for Enhanced Oil Recovery

Mechanochemical Synthesis of Hydrophilic Sulfur Nanoparticles in Aqueous Surfactant Solutions and Their Antibacterial Activity and Acute Toxicity in Mice

Seitzhan Turganbay, Saule Aidarova, Saltanat Kumargaliyeva, Dias Argimbayev, Aitugan Sabitov, Zhanar Iskakbayeva, Marina Lyu, Naiyla Ibragimova and Gulsinay Turganbay

Research Paper | published online: 16 Nov 2023

ES Materials and Manufacturing, 2024, 23, 1020
Mechanochemical Synthesis of Hydrophilic Sulfur Nanoparticles in Aqueous Surfactant Solutions and Their Antibacterial Activity and Acute Toxicity in Mice

Review on Hierarchically Porous BEA and ZSM-5 Zeolites and Its Industrial Catalytic Applications

Manikandan Krishnamurthy, N. Dinesh Kumar and M. Swaminathan

Review Paper | published online: 14 May 2024

ES Materials and Manufacturing, 2024, 24, 1151
Review on Hierarchically Porous BEA and ZSM-5 Zeolites and Its Industrial Catalytic Applications

A Review on Thin Film Technology and Nanomaterial Characterization Techniques

Rai Dhirendra Prasad, Shivanand B. Teli, Rai Surendra Prasad, Rai Bishvendra Prasad, Saurabh R. Prasad, Pramode Sinha, Amit Sinha, Preety Sinha, Mamata Saxena, Rai Rajnarayan. Prasad, R. S. Pande, Naresh Charmode, K. G. Deshmukh, Prashant D. Sarvalkar, U. D. Kadam, Chandrasekhar Chiplunkar, Nirmala Prasad, M.V. Padvi and Zhanhu Guo

Review Paper | published online: 29 Jul 2024

ES Materials and Manufacturing, 2024, 25, 1198
A Review on Thin Film Technology and Nanomaterial Characterization Techniques

Carbon Dots Modified Graphite as Novel Support Material for Low Palladium (Pd) Loading Direct Ethanol Fuel Cell Catalyst

Bipin Kumar Singh, Anirban Mukherjee, Nasrin Kamal, Gourisankar Roymahapatra, Zhanhu Guo and Susanta Sinha Mahapatra

Research Paper | published online: 05 Nov 2024

ES Materials and Manufacturing, 2024, 26, 1297
Carbon Dots Modified Graphite as Novel Support Material for Low Palladium (Pd) Loading Direct Ethanol Fuel Cell Catalyst

Design Optimization of Heterogeneous Stiffness-Varying Composites through Localized Fiber Volume Fraction Control

Noha M. Hassan, Zied Bahroun, Mahmoud Awad, Rami As’ad and Zain Hussein

Research Paper | published online: 30 Jan 2025

ES Materials and Manufacturing, 2025, 27, 1392
Design Optimization of Heterogeneous Stiffness-Varying Composites through Localized Fiber Volume Fraction Control

High Temperature Studies on Cerium Dioxide-Doped Zirconium Oxide for Structural, Optical and Dielectric Properties

M. Naga Sravanthi, H.S. Anantha Padmanabha and J. Sudagar

Research Paper | published online: 10 May 2025

ES Materials and Manufacturing, 2025, 28, 1493
High Temperature Studies on Cerium Dioxide-Doped Zirconium Oxide for Structural, Optical and Dielectric Properties

Numerical Investigation of Thermomechanical Behavior and Microstructural Evolution in Friction Stir Welded 6061 Aluminum Alloy 

Yong Shao, Yusong Li, Yuji Sun, Cheng Liu and Pingyi Guo

Research Paper | published online: 29 Jul 2025

ES Materials and Manufacturing, 2025, 29, 1654
Numerical Investigation of Thermomechanical Behavior and Microstructural Evolution in Friction Stir Welded 6061 Aluminum Alloy 

Corrosion Behavior of Structural Steels in Sea Ice and Seawater Studied by Electrochemical Method

P. Y. Guo, Q. H. Wu, C. D. Len, J. Y. Xia, Y. Shao, K. Wang, Y. X. Wang, L. L. Yang and X. C. Lu

Research Paper | published online: 10 Oct 2025

ES Materials and Manufacturing, 2025, 30, 1790
Corrosion Behavior of Structural Steels in Sea Ice and Seawater Studied by Electrochemical Method

Surface Modification of Silver Nanoparticles with Pyrazolyldiazonium Sulfonates for Enhanded Stability and Controlled Morphology

Assiya Kassanova, Almar Zhumabekov, Bahtiyar Shakenov, Makpal Yestayeva, Gulnaz Rymbayeva and Dilara Temirbayeva

Research Paper | published online: 19 Dec 2025

ES Materials and Manufacturing, 2026, 31, 1964
Surface Modification of Silver Nanoparticles with Pyrazolyldiazonium Sulfonates for Enhanded Stability and Controlled Morphology

Ground Granulated Blast Furnace Slag as a Supplementary Cementitious Material in Concrete: A Comprehensive Review

Omrane Benjeddou and Majed A. A. Aldahdooh

Review Paper | published online: 31 Mar 2026

ES Materials and Manufacturing, 2026, 32, 2175
Ground Granulated Blast Furnace Slag as a Supplementary Cementitious Material in Concrete: A Comprehensive Review

Machine Learning Prediction of Wear Behavior in Magnesium-Aluminium-Zinc AZ31 alloy/Titanium Carbide Composites Fabricated by Powder Metallurgy 

T. Satish Kumar, S. Shalini, Jana Petrů, M. Thilaga and Kanak Kalita

Research Paper | published online: 14 Aug 2026

ES Materials and Manufacturing, 2026, 33, 2470
Machine Learning Prediction of Wear Behavior in Magnesium-Aluminium-Zinc AZ31 alloy/Titanium Carbide Composites Fabricated by Powder Metallurgy 

Li(0)-Pyridine (1:1) Template for Efficient Hydrogen Storage

Mrinal Kanti Dash, Santanab Giri, Indrajit Chakraborty, Shampa Bhattacharyya, Gobinda Chandra De and Gourisankar Roymahapatra

Research Paper | published online: 27 Feb 2023

ES Materials and Manufacturing, 2023, 19, 825
Li(0)-Pyridine (1:1) Template for Efficient Hydrogen Storage

Natural Fibre Reinforced  Thermoplastic Composite Synthesis Methods and Potential Applications

Sumit Devarshi, Amar Pndhare, P. E. Lokhande, Joseph P. Mooney and Sandeep Chakrabarti

Review Paper | published online: 27 Feb 2023

ES Materials and Manufacturing, 2023, 21, 827
Natural Fibre Reinforced  Thermoplastic Composite Synthesis Methods and Potential Applications

Probing a Lead Inhibitor from the Thymus Vulgaris against the Alzheimer Protein: Human Beta Secretase

Santosh R. Kshirsagar, Sandip P. Gondake, Sagar I. Shinde and Milan Hait

Research Paper | published online: 10 Mar 2023

ES Materials and Manufacturing, 2023, 20, 832
Probing a Lead Inhibitor from the Thymus Vulgaris against the Alzheimer Protein: Human Beta Secretase

Synthesis and Characterization of Novel Calcium Oxide/Calcium Ferrite, CaO/CaFe2O4 Composite Nanocatalyst for Biodiesel Production

Tawakalitu AbdulRasheed, Benjamin Afotey, Emmanuel Godwin Ankudey, and Daniel Adjah Anang

Research Paper | published online: 05 Jul 2023

ES Materials and Manufacturing, 2023, 22, 922
Synthesis and Characterization of Novel Calcium Oxide/Calcium Ferrite, CaO/CaFe2O4 Composite Nanocatalyst for Biodiesel Production

Towards Advanced Animal Care: A Li-Fi and IoT-Based System for Monitoring Newborn Livestock

Tanveer Baig Z, Danish Ather, Sonia Setia, Suhail Javed Quraishi and Syed Mohtashim Mian

Research Paper | published online: 30 Nov 2023

ES Materials and Manufacturing, 2024, 23, 1038
Towards Advanced Animal Care: A Li-Fi and IoT-Based System for Monitoring Newborn Livestock

Adsorptive Removal of Chromium from Simulated Industrial Wastewater using Jungle Geranium-Derived Biosorbents

Pushpanjali Bhat, Nikshitha Jain, Nithesh Naik, Antony V Samrot, Pai B. Jagadeesha and S. A. Salmataj 

Research Paper | published online: 25 Dec 2023

ES Materials and Manufacturing, 2023, 22, 1070
Adsorptive Removal of Chromium from Simulated Industrial Wastewater using Jungle Geranium-Derived Biosorbents

Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder

Sarada Prasad Parida, Debashish Mishra, Rajiv Lochan Padhy, Pankaj Charan Jena, Sudhansu Ranjan Das, Ali A. Basem, Debabrata Dhupal and Ammar Elsheikh

Research Paper | published online: 27 May 2024

ES Materials and Manufacturing, 2024, 24, 1161
Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder

Microstructures and Characterization of Ti6Al4V Alloy Friction Stir Alloyed with Cu and Al Powders

Anna Zykova, Andrey Vorontsov, Andrey Chumaevskii, Denis Gurianov, Nickolai Savchenko, Evgeny Kolubaev and Sergei Tarasov

Research Paper | published online: 08 Aug 2024

ES Materials and Manufacturing, 2024, 25, 1205
Microstructures and Characterization of Ti6Al4V Alloy Friction Stir Alloyed with Cu and Al Powders

Studies on the Electrochemical Performance of Zinc Oxide (ZnO) Thin Film on Different Substrates

M. S. Patil, A. A. Mancharkar, P. E. Lokhande and S. M. Salunkhe

Research Paper | published online: 24 Oct 2024

ES Materials and Manufacturing, 2024, 26, 1279
Studies on the Electrochemical Performance of Zinc Oxide (ZnO) Thin Film on Different Substrates

Utilization of Nano Clay in Concrete: A Review of Mechanical, Durability, and Workability Properties

Ali Jahami, Farah Chamseddine, Camille A. Issa, Hussein Zeaiter, Ali Salhab and Fatima Khalil

Research Paper | published online: 05 Dec 2024

ES Materials and Manufacturing, 2025, 27, 1333
Utilization of Nano Clay in Concrete: A Review of Mechanical, Durability, and Workability Properties

Optimization of In-situ Integration of Gold Nanoparticles into Commercial Contact Lenses for Ophthalmic Applications

Said M. El Turk, Ahmed E. Salih and Haider Butt

Research Paper | published online: 29 Mar 2025

ES Materials and Manufacturing, 2025, 28, 1456
Optimization of In-situ Integration of Gold Nanoparticles into Commercial Contact Lenses for Ophthalmic Applications

Effect of Nanosized Mineral Additives on Strengthening and Corrosion Resistance of Cementing Mortars

Gulnaz Zh.Moldabayeva, Аrtem L. Kozlovskiy, and Mukan A. Sadvakassov

Research Paper | published online: 15 Apr 2025

ES Materials and Manufacturing, 2025, 28, 1467
Effect of Nanosized Mineral Additives on Strengthening and Corrosion Resistance of Cementing Mortars

Evolving Trends in 3D Printing of Graphene Composites

Shammah Aldhanhani, Murad Ali and Haider Butt

Communication | published online: 19 Aug 2025

ES Materials and Manufacturing, 2025, 29, 1682
Evolving Trends in 3D Printing of Graphene Composites

Numerical Modelling of Ballistic Impact on White Silkworm Cocoon Waste Fiber Reinforced Epoxy Composites

Kittipong Patanapisalsin, Apichart Artnaseaw, Achira Artnaseaw and Kriengkrai Nabudda

Research Paper | published online: 22 Oct 2025

ES Materials and Manufacturing, 2025, 30, 1818
Numerical Modelling of Ballistic Impact on White Silkworm Cocoon Waste Fiber Reinforced Epoxy Composites

Effect of Lime Water on Strength and Durability Properties of Very High-Volume Fly Ash Concrete

S. Kandasamy, M. Thanmanaselvi, M. V. V. Thirumuruga Poiyamozhi, G. Swaminathan, N. Pannirselvam and Ratna Rachel Ponraj

Research Paper | published online: 24 Dec 2025

ES Materials and Manufacturing, 2026, 31, 1976
Effect of Lime Water on Strength and Durability Properties of Very High-Volume Fly Ash Concrete

Study of Hydrogenation and Cavitation Erosion Mechanisms in Multilayer Coatings–Candidate Materials for Inhibition of Corrosion Processes in Metal Structures and Pipelines

G. Zh. Moldabayeva, R. Suleimenova, А. L. Kozlovskiy, Z. Toktarbay, Sh. R. Tuzelbayeva, A. Kh. Syzdykov and N. S. Buktukov

Research Paper | published online: 23 Mar 2026

ES Materials and Manufacturing, 2026, 32, 2152
Study of Hydrogenation and Cavitation Erosion Mechanisms in Multilayer Coatings–Candidate Materials for Inhibition of Corrosion Processes in Metal Structures and Pipelines

Recycled Materials Instead of Cement in Concrete: A Sustainable Solution

Radwa Defalla Abdel Hafez, Samir M. Ahmed, Raghda Osama Abd-Al Ftah and Magdy Youssef Riad Riad

Research Paper | published online: 17 Aug 2026

ES Materials and Manufacturing, 2026, 33, 2475
Recycled Materials Instead of Cement in Concrete: A Sustainable Solution

Semi Empirical Evaluation of Shortest Amino acid (i.e., Glycine) as molecular device

Gaurav Sikri, Ravinder Singh Sawhney and Ravinder Kumar

Research Paper | published online: 27 Feb 2023

ES Materials and Manufacturing, 2023, 21, 826
Semi Empirical Evaluation of Shortest Amino acid (i.e., Glycine) as molecular device

Functionalized Phenothiazine: A New Class of Organic Superalkali

Swapan Sinha, Basanta Bhunia and Santanab Giri

Research Paper | published online: 15 Mar 2023

ES Materials and Manufacturing, 2023, 19, 837
Functionalized Phenothiazine: A New Class of Organic Superalkali

Rare Earth and Trace Metal Characteristics of Bentonite in the Rajmahal Hills

Ashok Kr. Jha, Raghvendra Thakur, Sachin Verma and Subhajit Sikdar

Research Paper | published online: 15 Mar 2023

ES Materials and Manufacturing, 2023, 20, 840
Rare Earth and Trace Metal Characteristics of Bentonite in the Rajmahal Hills

Effect of Incorporation of SnS Nanorods on the Growth Mechanism, Crystallinity, Optoelectronic Performance, and Stability of CH3NH3PbI3 Perovskite Active Layer

Abhilasha Rokade, Hemant Tarkas, Avinash Rokade, Vaishali Waman, Devashri Upasani, J. V. Sali, and S. R. Jadkar

Research Paper | published online: 20 Aug 2023

ES Materials and Manufacturing, 2023, 22, 937
Effect of Incorporation of SnS Nanorods on the Growth Mechanism, Crystallinity, Optoelectronic Performance, and Stability of CH3NH3PbI3 Perovskite Active Layer

Influence of Process Parameters on Surface Crack Density in Electrical Discharge Machining of Ni35Ti35Zr15Cu10Sn5 Shape Memory Alloy

Mohammed Ali Al-Mousawi, Saad Hameed Al Shafaie and Zuheir Talib Khulief

Research Paper | published online: 10 Nov 2023

ES Materials and Manufacturing, 2024, 23, 1013
Influence of Process Parameters on Surface Crack Density in Electrical Discharge Machining of Ni35Ti35Zr15Cu10Sn5 Shape Memory Alloy

Studying Characteristics of Natural Bitumen of Oil Sand with Comparison to Heavy Crude Oil

Yerbol Tileuberdi, Yerdos Ongarbayev, Yerzhan Imanbayev, Ainura Yermekova, Frank Behrendt, Akmaral Ismailova, Khairulla Zhanbekov, Ainur Seilkhan and Zulkhair Mansurov

Research Paper | published online: 24 Nov 2023

ES Materials and Manufacturing, 2023, 22, 1035
Studying Characteristics of Natural Bitumen of Oil Sand with Comparison to Heavy Crude Oil

Effective Approach to Regulate and Control the Degradation Rate of Metals: Bioinspired Coatings

Amrita Mehta, Antony V Samrot, Ananya Kadekar, Nithesh Naik, S. A. Salmataj, Pushpanjali Bhat, Ayobami Matthew Olajuyin and Suma Subraya Bhat

Review Paper | published online: 25 Dec 2023

ES Materials and Manufacturing, 2023, 22, 1069
Effective Approach to Regulate and Control the Degradation Rate of Metals: Bioinspired Coatings

Stability Assessment of Mbene Materials Using Scikit-Learn Inspired Application Programming Interface: Gplearn and Particle Swarm Optimization

Basha SK Jameer and Jubilson E. Ajith

Research Paper | published online: 02 Jun 2024

ES Materials and Manufacturing, 2024, 24, 1166
Stability Assessment of Mbene Materials Using Scikit-Learn Inspired Application Programming Interface: Gplearn and Particle Swarm Optimization

A Polyampholyte based on Itaconic acid and [(3-methacryloylamino)propyl]-Trimethylammonium Chloride: Synthesis and Study of Biocidal Properties

K. Zh. Abdiyev, G. K. Kussainova, M. N. Mohamad Ibrahim, M. B. Zhursumbayeva, N. Zh. Seitkaliyeva, T. M. Seilkhanov, D. N. Shakhmetova and Zh. Toktarbay

Research Paper | published online: 30 Aug 2024

ES Materials and Manufacturing, 2024, 25, 1218
A Polyampholyte based on Itaconic acid and [(3-methacryloylamino)propyl]-Trimethylammonium Chloride: Synthesis and Study of Biocidal Properties

Phytoremediation of Heavy Metals from Soil and their Effects on Plant Physiology - A Review

Gouhar Rahman, Juma Muhammad, Muhammad Ilyas, Muhammad Subhanullah, Kaleem Ullah, Muratzhan Massimzhan, Murat Toktar, Yerkin Bektay, Medeu Kalybekov, Alibek Ydyrys and Yryszhan Zhakypbek

Review Paper | published online: 06 Nov 2024

ES Materials and Manufacturing, 2024, 26, 1298
Phytoremediation of Heavy Metals from Soil and their Effects on Plant Physiology - A Review

Study of Kinetics of Interaction Between Ammonium Bisulfate and Potassium Chloride for Fertilizers

Kalkaman Zhumashev, Akmaral Serikbayeva, Assiya Boranbayeva, Zhansaule Altybayeva, Akkenzhe Bussurmanova, Anar Akkenzheyeva, Aigul Gusmanova, Salima Cherkeshova, Aibala Narembekova, Feruza Berdikulova, Arman Mauleshev and Tugelbai Kenbaev

Research Paper | published online: 23 Feb 2025

ES Materials and Manufacturing, 2025, 27, 1421
Study of Kinetics of Interaction Between Ammonium Bisulfate and Potassium Chloride for Fertilizers

Impact Damage Behavior of Additively Manufactured Stainless Steel Triply Periodic Minimal Surface-Lattice Composite Sandwich Panels

Aliaa M. Abou-Ali, Chukwugozie J. Ejeh, Wesley J. Cantwell, Imad Barsoum, Shrinivas Bojanampati and Rashid K. Abu Al-Rub

Research Paper | published online: 05 Apr 2025

ES Materials and Manufacturing, 2025, 28, 1461
Impact Damage Behavior of Additively Manufactured Stainless Steel Triply Periodic Minimal Surface-Lattice Composite Sandwich Panels

Selective Hydrogenation of Phenylacetylene-Isoprene Mixtures on Multicomponent Skeletal Nickel Catalysts

Indira M. Dzheldybaeva, Manshuk Z. Esenalieva, Zhaksyntay K. Kairbekov and Saltanat M. Suimbaeva

Research Paper | published online: 25 Jul 2025

ES Materials and Manufacturing, 2025, 29, 1643
Selective Hydrogenation of Phenylacetylene-Isoprene Mixtures on Multicomponent Skeletal Nickel Catalysts

Production of Silica from Industrial Silica Waste and Their Use as An Anode for Lithium-Ion Batteries

Saule Zharylkan, Shynggyskhan Sultakhan, JingJing Liu, Yerik Merkibayev, Aigul Baibotayeva, Kydyr Askaruly, Kanay Rysbekov, Meiram Begentayev and Seitkhan Azat

Research Paper | published online: 22 Oct 2025

ES Materials and Manufacturing, 2025, 30, 1821
Production of Silica from Industrial Silica Waste and Their Use as An Anode for Lithium-Ion Batteries

Programmable Logic Controller-Based Seasoning Dispenser Application in Noodle Broth

Panupich Kheunkhieo, Pisan Moonumca, Thanaporn Singhpoo, Sahassawas Poojeera and Tossapol Jangnoi

Research Paper | published online: 27 Dec 2025

ES Materials and Manufacturing, 2026, 31, 1991
Programmable Logic Controller-Based Seasoning Dispenser Application in Noodle Broth

The Role of SiC Reinforcing Additives in Composite Ceramics in Suppression of Helium Embrittlement Processes and Containment of Radiation Damage in the Near-Surface Layer under High-Dose Irradiation

R. Yelshibekov, A. L. Kozlovskiy,  G. Zh. Moldabayeva, Z. Toktarbay, A. T. Zhumazhanova, N. Volodina and R. Shakirzyanov

Research Paper | published online: 13 Apr 2026

ES Materials and Manufacturing, 2026, 32, 2182
The Role of SiC Reinforcing Additives in Composite Ceramics in Suppression of Helium Embrittlement Processes and Containment of Radiation Damage in the Near-Surface Layer under High-Dose Irradiation

Cost-Effective Strengthening of Concrete Columns: Utilizing Stainless Steel Hose Clamps with Natural and Recycled Aggregates

Chanachai Thongchom, Min Jae Park, Panuwat Joyklad and Qudeer Hussain

Research Paper | published online: 19 Aug 2026

ES Materials and Manufacturing, 2026, 33, 2486
Cost-Effective Strengthening of Concrete Columns: Utilizing Stainless Steel Hose Clamps with Natural and Recycled Aggregates

Ultrathin MoSe2 Nanosheets Coated on Hollow Carbon Spheres as Efficient Hybrid Catalyst for Hydrogen Evolution Reaction

Qin Yuan, Ruijing Wang, Qunlong Wang, Peng Sun, Rongrong Nie and Xuefeng Wang

Research Paper | published online: 14 Dec 2018

ES Materials and Manufacturing, 2018, 2, 9-15
Ultrathin MoSe2 Nanosheets Coated on Hollow Carbon Spheres as Efficient Hybrid Catalyst for Hydrogen Evolution Reaction

A Review in Investigation of Marine Biopolymer (Chitosan) for Bioapplications

Ishraq Abd Ulrazzaq Kadhim, Hayder Abbas Sallal and Zainab S. Al-Khafaji

Review Paper | published online: 27 Feb 2023

ES Materials and Manufacturing, 2023, 21, 828
A Review in Investigation of Marine Biopolymer (Chitosan) for Bioapplications

Recent Advancement of 2D Bi-Metallic Hydroxides with Various Strategical Modification for the Sustainable Hydrogen Production through Water Electrolysis

Sreenivasan Nagappan, Hariharan N Dhandapani, Arun Karmakar and Subrata Kundu

Review Paper | published online: 04 Mar 2023

ES Materials and Manufacturing, 2023, 19, 830
Recent Advancement of 2D Bi-Metallic Hydroxides with Various Strategical Modification for the Sustainable Hydrogen Production through Water Electrolysis

Characterization of Economic and Non-toxic Copper Doped Zinc Sulfide Thin Film Grown by Facile Chemical Bath Deposition Method

Nanasaheb P. Huse, Rohit M. Patil and Ramphal Sharma

Research Paper | published online: 15 Mar 2023

ES Materials and Manufacturing, 2023, 20, 839
Characterization of Economic and Non-toxic Copper Doped Zinc Sulfide Thin Film Grown by Facile Chemical Bath Deposition Method

Utilization of Humic-Loaded Fly Ash as a Slow-Release Amendment for Soil Quality Improvement

Nuraly S. Akimbekov, Ilya Digel, Kuanysh T. Tastambek, Kuttymurat Tagayev, Sholpan O. Bastaubayeva, Adel K. Marat

Research Paper | published online: 02 Oct 2023

ES Materials and Manufacturing, 2023, 22, 967
Utilization of Humic-Loaded Fly Ash as a Slow-Release Amendment for Soil Quality Improvement

Protection of Magnesium AZ31B alloy in a Hydrochloric Acid Medium Using Gelatin and Optimizing the Results Through Response Surface Methodology

Tasvi Shetty, Pai B. Jagadeesha , Nithesh Naik, Antony V. Samrot, Pushpanjali Bhat,and S. A. Salmataj

Research Paper | published online: 20 Dec 2023

ES Materials and Manufacturing, 2023, 22, 1066
Protection of Magnesium AZ31B alloy in a Hydrochloric Acid Medium Using Gelatin and Optimizing the Results Through Response Surface Methodology

Single-Channel and Multi-Channel Electrospinning for the Fabrication of PLA/PCL Tissue Engineering Scaffolds: Comparative Study of the Materials Physicochemical and Biological Properties

Semen Goreninskii, Ulyana Chernova, Elisaveta Prosetskaya, Alina Laushkina, Alexander Mishanin, Alexey Golovkin and Evgeny Bolbasov

Research Paper | published online: 25 Apr 2024

ES Materials and Manufacturing, 2024, 24, 1138
Single-Channel and Multi-Channel Electrospinning for the Fabrication of PLA/PCL Tissue Engineering Scaffolds: Comparative Study of the Materials Physicochemical and Biological Properties

Energy-Efficient Dry Construction Mixtures Based on Modified Diatomite

Ruslan E. Nurlybayev, Erzhan I. Kuldeyev, Axaya S. Yestemessova, Zaure N. Altayeva, Yelzhan S. Orynbekov and Bakhytzhan K. Sarsenbayev

Research Paper | published online: 30 Aug 2024

ES Materials and Manufacturing, 2024, 25, 1220
Energy-Efficient Dry Construction Mixtures Based on Modified Diatomite

Optimization of Friction Stir Processed (FSPed) Copper Surface Composite Mechanical Characteristics Using Grey Model (1, N)

N. Ramakrishna, L. Suvarna Raju, G. Mallaiah and Borigorla Venu

Research Paper | published online: 18 Sep 2024

ES Materials and Manufacturing, 2024, 26, 1229
Optimization of Friction Stir Processed (FSPed) Copper Surface Composite Mechanical Characteristics Using Grey Model (1, N)

Eco-Friendly Encapsulation: Advancing Biopolymer Microcapsules for Sustainable Performance

Kanlapangha Rattanasaikaew and Preeyaporn Chaiyasat

Research Paper | published online: 23 Feb 2025

ES Materials and Manufacturing, 2025, 27, 1424
Eco-Friendly Encapsulation: Advancing Biopolymer Microcapsules for Sustainable Performance

Ultrasonic-Improved Bismuth Vanadate Precursor Preparation for Superior Tungsten Oxide/Bismuth Vanadate Photoanode Performance in Water Oxidation and Dye Degradation Processes

Watcharapong Nareejun, Mati Horprathum and Chatchai Ponchio

Research Paper | published online: 10 May 2025

ES Materials and Manufacturing, 2025, 28, 1494
Ultrasonic-Improved Bismuth Vanadate Precursor Preparation for Superior Tungsten Oxide/Bismuth Vanadate Photoanode Performance in Water Oxidation and Dye Degradation Processes

Contemporary Decorative Materials based on Polymer Binders and Mineral Raw Materials for Construction Purposes

Meiram M. Begentayev, Ruslan E. Nurlybayev, Zaure N. Altayeva, Erzhan I. Kuldeyev, Yelzhan S. Orynbekov, Axaya S. Yestemessova, Alinur A. Iskakov, Aktota A. Murzagulova, Gaukhar. K. Abisheva and Aidos A. Joldassov

Research Paper | published online: 08 Aug 2025

ES Materials and Manufacturing, 2025, 29, 1669
Contemporary Decorative Materials based on Polymer Binders and Mineral Raw Materials for Construction Purposes

Hydrogen–Free Processing of Hydrocarbon Raw Materials is the Basis of Technologies for Producing Environmentally Friendly Motor Fuels

Saule Nurzhanova, Yerdos Ongarbayev, Aizhan Omarova, Galymzhan Saidilda and Nurlan Annas

Research Paper | published online: 14 Oct 2025

ES Materials and Manufacturing, 2025, 30, 1800
Hydrogen–Free Processing of Hydrocarbon Raw Materials is the Basis of Technologies for Producing Environmentally Friendly Motor Fuels

Experimental Investigation of Shear Behaviour of Mild Steel Embossed Plate Shear Connector

R. Vijayakumar, N. Pannirselvam, J. Vanjinathan, S. Sundararaman, S. Kandasamy and Ratna Rachel Ponraj

Research Paper | published online: 24 Dec 2025

ES Materials and Manufacturing, 2026, 31, 1977
Experimental Investigation of Shear Behaviour of Mild Steel Embossed Plate Shear Connector

The Effect of Layered Double Hydroxides Incorporation on the Thermal Degradation of Polyvinyl Chloride in Practical Processing

Jinyun Jiang, Zelan Chen, Zhenyu Wang, Shuai Zhang, Jingyu Ye, Jianchen Cai, Fengtao Cao, Baiwen Wei and Xingrui Qian

Research Paper | published online: 09 Mar 2026

ES Materials and Manufacturing, 2026, 32, 2123
The Effect of Layered Double Hydroxides Incorporation on the Thermal Degradation of Polyvinyl Chloride in Practical Processing

Efficient Recovery of Molybdenum and Tungsten Ions from Standard Solutions Using D301 Anion Exchange Resin: Experiments and Multimodel Analysis

Akmaral Gazizovna Ismailova, Dinmukhamed Zhambululy Tolbay, Dilyara Rashitovna Rashit, Kulyash Tugelbaevna Kashaganova, Leila Kadirsizovna Kudreyeva and Graziella Liana Turdean

Research Paper | published online: 18 Sep 2026

ES Materials and Manufacturing, 2026, 33, 2540
Efficient Recovery of Molybdenum and Tungsten Ions from Standard Solutions Using D301 Anion Exchange Resin: Experiments and Multimodel Analysis

Boron Oxide/Alumina Nanocomposites as Lubricant Oil Additives to Save Friction-Induced Energy Waste

Wei Li, Qiang Chen, Wenjuan Zhang, Ting Luo and Bingqiang Cao

Research Paper | published online: 18 Feb 2022

ES Materials and Manufacturing, 2022, 18, 10-17
Boron Oxide/Alumina Nanocomposites as Lubricant Oil Additives to Save Friction-Induced Energy Waste

Polyvinyl Alcohol/Montmorillonite Nanocomposite Coated Biodegradable Films With Outstanding Barrier Properties 

Shuangshuang Yue, Shuanjin Wang, Dongmei Hana, Sheng Huang, Luyi Sun, Min Xiao and Yuezhong Meng

Research Paper | published online: 11 Mar 2023

ES Materials and Manufacturing, 2023, 20, 834
Polyvinyl Alcohol/Montmorillonite Nanocomposite Coated Biodegradable Films With Outstanding Barrier Properties 

Lanthanum Doped  Zirconia as an Efficient Catalyst for Reductive Amination of 2-methoxybenzaldehyde with Dimethylformamide via Leuckart Type Reaction

Jeetendra Y. Salunke and Ganapati D. Yadav

Research Paper | published online: 23 Mar 2023

ES Materials and Manufacturing, 2023, 19, 853
Lanthanum Doped  Zirconia as an Efficient Catalyst for Reductive Amination of 2-methoxybenzaldehyde with Dimethylformamide via Leuckart Type Reaction

Use of Dielectric Constant for Determination of Water-to-Cement Ratio (W/C) in Plastic Concrete: Part 1. Volumetric Water Content Modeling

Rui He, Tommy Nantung, Jan Olek and Na Lu

Research Paper | published online: 20 Apr 2023

ES Materials and Manufacturing, 2023, 21, 866
Use of Dielectric Constant for Determination of Water-to-Cement Ratio (W/C) in Plastic Concrete: Part 1. Volumetric Water Content Modeling

On the Utility of Teakwood Biochar for Iron Contaminants Removal from Water

Akito I Sema, Jaipriya Khatri, Basab Bijayi Dhar, Goutam Kulsi and  Jhimli Bhattacharyya

Research Paper | published online: 25 Apr 2023

ES Materials and Manufacturing, 2023, 21, 871
On the Utility of Teakwood Biochar for Iron Contaminants Removal from Water

Assessing the Feasibility of Utilizing a Method for Processing Oxidized Zinc Ores

Raigul Ramazanova, Natalya Seraya, Gulzhan Daumova, Aksaule Mamayeva, Bekzat Saurbayeva and Zhanat Idrisheva

Research Paper | published online: 22 Oct 2023

ES Materials and Manufacturing, 2023, 22, 993
Assessing the Feasibility of Utilizing a Method for Processing Oxidized Zinc Ores

Mechanical Properties of Eggshell Filled Non-Post-Cured and Post-Cured GFRP Composites: A Comparative Study

Suhas Kowshik, U Sathish Rao, Sathyashankara Sharma, Pavan Hiremath, Rajendra Prasad K. S., Nithesh Naik, Ritesh Bhat and Kasirajan Kasipandian

Research Paper | published online: 04 Dec 2023

ES Materials and Manufacturing, 2023, 22, 1043
Mechanical Properties of Eggshell Filled Non-Post-Cured and Post-Cured GFRP Composites: A Comparative Study

A Critical Review on Uses of Gases in Veterinary Medicine and Gas Sensing Materials

Rai Dhirendra Prasad, Rai Surendra Prasad, Y. I. Shaikh, S. R. Prasad, M. N. Padvi, P. D. Sarvalkar, Sanjay Saxena, Viquar S. Shaikh, G. M. Nazeruddin, Sameer Shaikh, A. B. Kanwade, Naresh Charmode, Anil Kumar Vaidya, Om Prakash Shrivastav, C. B. Desai and P. D. Patil

Review Paper | published online: 18 Jan 2024

ES Materials and Manufacturing, 2024, 23, 1084
A Critical Review on Uses of Gases in Veterinary Medicine and Gas Sensing Materials

Study of the Effect of Nanostructured Grains on the Radiation Resistance of Zirconium Dioxide Ceramics During Gas Swelling under High-dose Irradiation with Helium Ions

Artem L. Kozlovskiy, Marina Konuhova, Dmitriy I. Shlimas, Daryn B. Borgekov, Maxim V. Zdorovets, Rafael I. Shakirziyanov, Yuriy A. Garanin, Natalia O. Volodina and Anatoli I. Popov

Research Paper | published online: 02 Jun 2024

ES Materials and Manufacturing, 2024, 24, 1165
Study of the Effect of Nanostructured Grains on the Radiation Resistance of Zirconium Dioxide Ceramics During Gas Swelling under High-dose Irradiation with Helium Ions

Electrospray Ionization FT-ICR MS Analysis of Polar Compounds in Natural Bitumen of Munaily-Mola Oil Sands and Its Asphaltenes 

Ulan Kuoshiken, Yerbol Tileuberdi, Quan Shi, Yerdos Ongarbayev, Shuofan Li, Kairulla Zhanbekov, Ernar Kanzharkan and Yerzhan Imanbayev

Research Paper | published online: 25 Sep 2024

ES Materials and Manufacturing, 2024, 25, 1240
Electrospray Ionization FT-ICR MS Analysis of Polar Compounds in Natural Bitumen of Munaily-Mola Oil Sands and Its Asphaltenes 

Influence of Nanocrystalline Silicon Conductivity on the Structural and Optical Properties of Porous Silicon

Kadyrzhan Dikhanbayev, Isa Zharekeshev, Azamat Zhambyl, Yerulan Sagidolda, Zhansaya Baspakova, Bakyt Khaniyev, Nursultan Meirambekuly, Yeldos Kozhagulov and Shyryn Zhumatova

Research Paper | published online: 14 Nov 2024

ES Materials and Manufacturing, 2024, 26, 1316
Influence of Nanocrystalline Silicon Conductivity on the Structural and Optical Properties of Porous Silicon

Adsorption Kinetics of Anthocyanin Dye from Thai Dark Purple Glutinous Rice (Oryza sativa L.) on Silk Yarn
 

Thamonwan Meephun, Natthaphong Naksithong, Pattarapond Gonil, Warayuth Sajomsang, John B Bremner and Montra Chairat

Research Paper | published online: 20 Feb 2025

ES Materials and Manufacturing, 2025, 27, 1418
Adsorption Kinetics of Anthocyanin Dye from Thai Dark Purple Glutinous Rice (Oryza sativa L.) on Silk Yarn
 

New Nonionic Surfactants from Renewable Raw Materials-Sunflower Oil Production Waste

K. Zh. Abdiyev, B. B. Sadykov, M. B. Zhursumbayeva, N. Zh. Seitkaliyeva, Chien-Hsiang Chang, G. K. Kussainova, Z. N. Kambarova and Zhexenbek Toktarbay

Research Paper | published online: 18 Aug 2025

ES Materials and Manufacturing, 2025, 29, 1679
New Nonionic Surfactants from Renewable Raw Materials-Sunflower Oil Production Waste

Engineering Copper(I) Oxide Nanowire Architectures with Zinc Oxide Shells for Efficient Photoelectrochemical Water Splitting

Yerbolat Magazov, Zhamilya Taubaldiyeva, Yerniyaz Zhangaliyev, Sanzhar Manarbek, Guldana Zhigerbayeva, Vladislav Kudryashov and Nurxat Nuraje

Research Paper | published online: 22 Oct 2025

ES Materials and Manufacturing, 2025, 30, 1825
Engineering Copper(I) Oxide Nanowire Architectures with Zinc Oxide Shells for Efficient Photoelectrochemical Water Splitting

Enhancing Diesel-Biodiesel Blends for Lower Emissions and Improved Combustion Efficiency

Shashank Kumar, Vaibhav Trivedi, Kapil Gill, Pulkit Sharma, Man Vir Singh and Avnish Chauhan

Research Paper | published online: 27 Dec 2025

ES Materials and Manufacturing, 2026, 31, 1990
Enhancing Diesel-Biodiesel Blends for Lower Emissions and Improved Combustion Efficiency

Recovery of High-Purity Vanadium Pentoxide from Spent Hydrodesulfurization Catalysts via Controlled Recrystallization of Ammonium Metavanadate

Nazigul Zhumakynbai, Feruza Berdikulova, Aleksandr Fofanov and Bagzhan Ondiris

Research Paper | published online: 29 Apr 2026

ES Materials and Manufacturing, 2026, 32, 2219
Recovery of High-Purity Vanadium Pentoxide from Spent Hydrodesulfurization Catalysts via Controlled Recrystallization of Ammonium Metavanadate

Carbon Dot–Modified Screen-Printed Electrochemical Sensors for Chromium Speciation in Water and Particulate Matter (PM10)/Total Suspended Particulate: Interface Engineering and Field Validation

Yernar Kanagat, Enoch K. Adotey, Aidyn Altay, Ulagat Tangda and Munziya Abutalip

Review Paper | published online: 18 Sep 2026

ES Materials and Manufacturing, 2026, 33, 2545
Carbon Dot–Modified Screen-Printed Electrochemical Sensors for Chromium Speciation in Water and Particulate Matter (PM10)/Total Suspended Particulate: Interface Engineering and Field Validation

Study of the Application Prospects of Metal Oxide Films as Protective Materials for Electron Radiation Shielding

Dauren B. Kadyrzhanov, Malik E. Kaliyekperov, Ainash T. Zhumazhanova and Artem L. Kozlovskiy

Research Paper | published online: 21 Sep 2024

ES Materials and Manufacturing, 2024, 25, 1231
Study of the Application Prospects of Metal Oxide Films as Protective Materials for Electron Radiation Shielding

Advancing Structural Integrity: Graphene Nanocomposites via Vat Photopolymerization 3D Printing

Shammah Aldhanhani, Murad Ali, Rami Adham Elkaffas, Haider Butt and Yarjan Abdul Samad

Research Paper | published online: 07 Nov 2024

ES Materials and Manufacturing, 2024, 26, 1303
Advancing Structural Integrity: Graphene Nanocomposites via Vat Photopolymerization 3D Printing

Comprehensive Use of Electrical Inverse Lateral and Radioactive Logging for Strata Properties Investigation in Cased Wells 

Baxtjan Orinbaev, Boranbay Ratov, Volodymyr Khomenko, Nurbol Tileuberdi, Odiljon Khayitov, Azamat Umirzokov, Askar Seidaliyev, Assyl Makyzhanova, Aidar Kuttybayev, Alina Zahrytsenko and Oleksandr Kamyshatskyi

Research Paper | published online: 19 Feb 2025

ES Materials and Manufacturing, 2025, 27, 1417
Comprehensive Use of Electrical Inverse Lateral and Radioactive Logging for Strata Properties Investigation in Cased Wells 

Optimizing Waste Motor Oil Recycling into Diesel Using Novel Deep Eutectic Solvents: An Atomistic Study

Sagynysh Nurmanova, Sergey Kolisnichenko, Umirzhan Kokayev, Dinara Kalmanova, Abdikarim Karazhanov, Zhassulan Alipbayev, Fatima Abuova, Omirzak Abdirashev and Balzhan Satanova

Research Paper | published online: 03 May 2025

ES Materials and Manufacturing, 2025, 28, 1480
Optimizing Waste Motor Oil Recycling into Diesel Using Novel Deep Eutectic Solvents: An Atomistic Study

Activity and Stability of Modified Zeolite-containing Catalysts in the Hydrogen-free Processing of Hydrocarbon Feedstock

S. B. Nurzhanova, A. A. Omarova, A. Zh. Nauryzbaeva, G. T. Saidilda and A. Nurlan

Research Paper | published online: 12 Sep 2025

ES Materials and Manufacturing, 2025, 29, 1709
Activity and Stability of Modified Zeolite-containing Catalysts in the Hydrogen-free Processing of Hydrocarbon Feedstock

Composite Buckling Performances for Energy Structures and Infrastructures: A Milestone Analysis Based on Finite Element Research (2000–2025)

Suryanto Suryanto, Aditya Rio Prabowo, Ristiyanto Adiputra, Sören Ehlers, Moritz Braun, Indri Yaningsih, Iwan Istanto and Rahman Wijaya

Review Paper | published online: 27 Dec 2025

ES Materials and Manufacturing, 2026, 31, 1992
Composite Buckling Performances for Energy Structures and Infrastructures: A Milestone Analysis Based on Finite Element Research (2000–2025)

Development of a Geoinformation-Analytical System for Identifying Promising Aquifers of Fresh and Low-Mineralized Groundwater for Pasture Water Supply in the Arid Zone of Southern Kazakhstan 

Abai Jabassov, Malis Absametov, Ahmed N. Al-Dujaili, Nurbol Tileuberdi, Aigerim Alimgazina and Saeef Mohammed Hasan Abbas

Research Paper | published online: 04 May 2026

ES Materials and Manufacturing, 2026, 32, 2236
Development of a Geoinformation-Analytical System for Identifying Promising Aquifers of Fresh and Low-Mineralized Groundwater for Pasture Water Supply in the Arid Zone of Southern Kazakhstan 

The Effect of Ionizing Radiation on the Stability and Practical Applicability of (1-x) Iron (II, III) Oxide–x Zinc Oxide Nanocomposites

K. B. Kaliyekperova, A. L. Kozlovskiy, A. Zhaksylyk, G. Zh. Moldabayeva and D. B. Borgekov

Research Paper | published online: 29 Aug 2026

ES Materials and Manufacturing, 2026, 33, 2510
The Effect of Ionizing Radiation on the Stability and Practical Applicability of (1-x) Iron (II, III) Oxide–x Zinc Oxide Nanocomposites

The Influence of Polysulfide Solvent on the Performance of Cadmium Sulfide Sensitized Zirconium Dioxide-Based Quantum Dots

Ravi V. Ingle, Abhijit T. Supekar, Vikram P. Bhalekar, Bikram Prasad and Habib M. Pathan

Research Paper | published online: 31 Aug 2020

ES Materials and Manufacturing, 2020, 9, 12-20
The Influence of Polysulfide Solvent on the Performance of Cadmium Sulfide Sensitized Zirconium Dioxide-Based Quantum Dots

Tribological Characterization of Precipitation Hardened 7075 Aluminium Alloy Composites Reinforced with Cast Iron Particle

Jamaluddin Hindi, Amar Murthy A, Muralishwara K, Kasirajan Kasipandian, Gurumurthy B M and Nithesh Naik

Research Paper | published online: 22 Nov 2023

ES Materials and Manufacturing, 2023, 22, 1034
Tribological Characterization of Precipitation Hardened 7075 Aluminium Alloy Composites Reinforced with Cast Iron Particle

Treatment of Dyes Contaminated Water using Biochar Derived from Eucalyptus Wood Waste

Yu Shuang Ren, Ainur Seilkhan, Bекеn Akbota, Shicheng Zhang, Jiajun Xu, Hizbullah Khan and Muhammad Ilyas

Research Paper | published online: 21 Sep 2024

ES Materials and Manufacturing, 2024, 25, 1236
Treatment of Dyes Contaminated Water using Biochar Derived from Eucalyptus Wood Waste

Development of Light Pipes via Vat Photopolymerization for Advanced Optical Applications

Murad Ali, Oleg Shiryayev, Yap Fook Fah, Nader Vahdati and Haider Butt

Research Paper | published online: 07 Nov 2024

ES Materials and Manufacturing, 2024, 26, 1304
Development of Light Pipes via Vat Photopolymerization for Advanced Optical Applications

A Novel Hematite-Catalyzed Approach for Iron Removal from Zinc Sulfate Solutions

Lyazat Liakyn, Zhanar Onalbayeva, Gulzhan Daumova, Sergey Mamyachenkov, Natalya Kulenova and Olga Anisimova 

Research Paper | published online: 07 Mar 2025

ES Materials and Manufacturing, 2025, 27, 1436
A Novel Hematite-Catalyzed Approach for Iron Removal from Zinc Sulfate Solutions

Synthesis of Fullerenes by Electric Arc Discharge and their Applications in Pyrotechnic and Lubricants 

Zhadyra Aimasheva, Ali Çoruh, Daniyar Ismailov, Gulmira Partizan, Margulan Ibraimov and Bakyt Khaniyev

Research Paper | published online: 13 Mar 2025

ES Materials and Manufacturing, 2025, 28, 1444
Synthesis of Fullerenes by Electric Arc Discharge and their Applications in Pyrotechnic and Lubricants 

Catalytic Conversion of Hydrocarbons over Nanoscale Zeolitic Catalysts Based on Cerium-Modified HZSM and MCM-41

A.A. Omarova, A. Zh. Nauryzbaeva, S. R. Khairulin, S. B. Nurzhanova and A. S. Nagashybaeva

Review Paper | published online: 25 Jul 2025

ES Materials and Manufacturing, 2025, 29, 1645
Catalytic Conversion of Hydrocarbons over Nanoscale Zeolitic Catalysts Based on Cerium-Modified HZSM and MCM-41

Emerging Trends of Ionic Sensors for Electronic Skin (e-Skin)

Dawei Zhang, Haider Butt and Lianxi Zheng

Review Paper | published online: 31 Oct 2025

ES Materials and Manufacturing, 2025, 30, 1849
Emerging Trends of Ionic Sensors for Electronic Skin (e-Skin)

Durable Silver Nanowire Transparent Electrodes for Advanced Joule Heating Applications

Fadi Dawaymeh, Leen Samer Ali, Joseph P. Thomas, Abdulrahman Agha, Anas Alazzam, Kam Tong Leung and Marwa Abd-Ellah

Research Paper | published online: 30 Dec 2025

ES Materials and Manufacturing, 2026, 31, 1998
Durable Silver Nanowire Transparent Electrodes for Advanced Joule Heating Applications

Fatigue Behavior of Aluminium–Silicon–Magnesium Alloy Triply Periodic Minimal Surface Lattices via Laser Powder Bed Fusion

Ahmed Abdelgawad, Shrinivas Bojanampati, Rashid K. Abu Al-Rub and Imad Barsoum

Research Paper | published online: 04 May 2026

ES Materials and Manufacturing, 2026, 32, 2237
Fatigue Behavior of Aluminium–Silicon–Magnesium Alloy Triply Periodic Minimal Surface Lattices via Laser Powder Bed Fusion

In-depth Mechanistic Analysis of an Iron Chalcogenide Iron (Selenium, Tellurium) Thin-Film Memristor for Alcohol Detection

Jie Zhang, Yi Luo, Jens Hänisch, Shunping Shi, Chuanyu Zhang, Guo Yan and Yong Zhao

Research Paper | published online: 21 Sep 2026

ES Materials and Manufacturing, 2026, 33, 2548
In-depth Mechanistic Analysis of an Iron Chalcogenide Iron (Selenium, Tellurium) Thin-Film Memristor for Alcohol Detection

Advanced Metal Oxides and Nitrides Thermoelectric Materials for Energy Harvesting

Yining Feng, Evan Witkoske, Elizabeth S Bell, Yang Wang, Athanasios Tzempelikos and Ian T. Ferguson and Na Lu

Review Paper | published online: 08 Oct 2018

ES Materials and Manufacturing, 2018, 1, 13-20
Advanced Metal Oxides and Nitrides Thermoelectric Materials for Energy Harvesting

Prospective Photovoltaic-Thermoelectric Hybrid System

Gao Min

Personal Account | published online: 05 Jan 2022

ES Materials and Manufacturing, 2022, 16, 13-18
Prospective Photovoltaic-Thermoelectric Hybrid System

The State of the Art of the Mining and Metallurgical Industry in Kazakhstan and Future Perspectives: A Systematic Review

Makhabbat Kunarbekova, Yelriza Yeszhan, Saule Zharylkan, Mukhtar Alipuly, Ulan Zhantikeyev, Aigul Beisebayeva, Kenes Kudaibergenov, Kanay Rysbekov, Zhexenbek Toktarbay and Seitkhan Azat

Review Paper | published online: 30 Aug 2024

ES Materials and Manufacturing, 2024, 25, 1219
The State of the Art of the Mining and Metallurgical Industry in Kazakhstan and Future Perspectives: A Systematic Review

The Novelty of Partially Replacing Cement with Gypsum: Optimum Mix Design and Structural Applications

Najib Gerges, Jihad Ghannam, Camille A. Issa, Georges Nehmeh, Tracy Wehbe, Lara Gerges and Ziad Amine

Research Paper | published online: 05 Dec 2024

ES Materials and Manufacturing, 2025, 27, 1336
The Novelty of Partially Replacing Cement with Gypsum: Optimum Mix Design and Structural Applications

Application of Plasticizers Octadecane to Pentatriacontane and Ethylene Glycol in the Manufacture of Metaloceramic Alloys

Boranbay Ratov, Aidar Kuttybayev, Nurbol Tileuberdi, Zamanbek Utepov, Madiyar Aliakbar, Arailym Zhanggirkhanova, Oleksandr Pashchenko, Oleksandr Kamyshatskyi, Volodymyr Khomenko, Oleksandr Zaichuk and Askar Seidaliyev

Research Paper | published online: 17 May 2025

ES Materials and Manufacturing, 2025, 28, 1563
Application of Plasticizers Octadecane to Pentatriacontane and Ethylene Glycol in the Manufacture of Metaloceramic Alloys

Study on Forming and Microstructure of Titanium-Nickel Double Wire Arc Deposition Gradient Composites

Xin Ye, Peng Xia, Guangshun Zhang and Guangcai Chang

Research Paper | published online: 19 Sep 2025

ES Materials and Manufacturing, 2025, 29, 1719
Study on Forming and Microstructure of Titanium-Nickel Double Wire Arc Deposition Gradient Composites

Optimized Batik Wastewater Filtration using Polymeric Membranes Based on Cellulose Acetate Incorporated with Titanium Dioxide and Zinc Oxide Nanoparticles 

Wara Dyah Pita Rengga, Achmad Yanuar Maulana, Sella Mustika Puti Andini, Nadiatus Salwa, Revitalia Nilnalmuna and Maulida Zakia

Research Paper | published online: 31 Oct 2025

ES Materials and Manufacturing, 2025, 30, 1847
Optimized Batik Wastewater Filtration using Polymeric Membranes Based on Cellulose Acetate Incorporated with Titanium Dioxide and Zinc Oxide Nanoparticles 

Optimization of Design and Material Selection for the Nozzle Block of Rocket Engines

Laura Mustafa, Marat Nurguzhin, Marat Ismailov, Marat Janikeyev, Igor Vongai, Ilyas Ablakatov, Berdiyar Baiserikov, Ablaykhan Baigonov, Mohammed Meiirbekov, Abussaid Yermekov, Botagoz Medyanova, Nurmakhan Yesbolov, Arman Kulbekov, Rustem Zhunusov and Gulmaira Partizan

Research Paper | published online: 13 Dec 2025

ES Materials and Manufacturing, 2026, 31, 1945
Optimization of Design and Material Selection for the Nozzle Block of Rocket Engines

Acid-Oxidative Leaching of Rare Earth and Associated Critical Elements from Spent Uranium In-Situ Recovery Cores

Rustem V. Sharipov, Gaukhar K. Bishimbayeva, Amantay Dalbanbay, Yerbol M. Karmanov, Magzum Zh. Sadykov, Aidana Myrzabekova, Saule M. Nurmakova, Kudaybergen Zhapabayev, Karlygash Zh. Bulenova and Zaken A. Iskakov

Research Paper | published online: 18 Sep 2026

ES Materials and Manufacturing, 2026, 33, 2538
Acid-Oxidative Leaching of Rare Earth and Associated Critical Elements from Spent Uranium In-Situ Recovery Cores

Design, Synthesis, and Use of High Temperature Resistant Aerogels Exceeding 800 oC

Peiying Hu, Ling Liu, Mingda Zhao, Jing Wang, Xiaomin Ma and Jin Wang

Review Paper | published online: 26 Apr 2021

ES Materials and Manufacturing, 2022, 15, 14-33
Design, Synthesis, and Use of High Temperature Resistant Aerogels Exceeding 800 oC

Copper Indium Disulfide Thin Films: Electrochemical Deposition and Properties

J. P. Sawant, P. K. Bhujbal, N. B. Choure, R. B. Kale and H. M. Pathan

Review Paper | published online: 15 Jan 2022

ES Materials and Manufacturing, 2022, 17, 14-22
Copper Indium Disulfide Thin Films: Electrochemical Deposition and Properties

Artificial Intelligence-Enabled 4-Dimensional Printed Hydrogel Wearables: Temperature and Ultraviolet Monitoring

Mohamed Elnemr, Yasmin Halawani, Ragi Adham Elkaffas, Rami Elkaffas, Yarjan Abdul Samad, Muhammed Hisham, Baker Mohammad and Haider Butt

Research Paper | published online: 26 Feb 2025

ES Materials and Manufacturing, 2025, 27, 1428
Artificial Intelligence-Enabled 4-Dimensional Printed Hydrogel Wearables: Temperature and Ultraviolet Monitoring

Effect of Magnesium Oxide Dopant on the Structural, Strength and Thermophysical Properties of Neodymium Zirconate Ceramics

Artem L. Kozlovskiy and Mussa Kabiyev

Research Paper | published online: 06 Apr 2025

ES Materials and Manufacturing, 2025, 28, 1462
Effect of Magnesium Oxide Dopant on the Structural, Strength and Thermophysical Properties of Neodymium Zirconate Ceramics

Increase of Wear Resistance and Strength of Cementing Mortars Due to Stabilizing Fine-Dispersed Additives of Metallurgical Sludge

Gulnaz Zh.Moldabayeva, Аrtem L.Kozlovskiy, Nikolay S. Buktukov and Mukan A. Sadvakassov

Research Paper | published online: 15 Apr 2025

ES Materials and Manufacturing, 2025, 28, 1468
Increase of Wear Resistance and Strength of Cementing Mortars Due to Stabilizing Fine-Dispersed Additives of Metallurgical Sludge

Study of the Influence of Variation in the Number of Layers in Multilayer Aluminium Nitride-Titanium-di-oxide  Coatings on Resistance to Thermal Effects and Cavitation Erosion

R. Suleimenova, G. Zh. Moldabayeva, А. L. Kozlovskiy, Z. Toktarbay, A. E. Shamshenova and M. A. Sadvakassov

Research Paper | published online: 12 Sep 2025

ES Materials and Manufacturing, 2025, 29, 1707
Study of the Influence of Variation in the Number of Layers in Multilayer Aluminium Nitride-Titanium-di-oxide  Coatings on Resistance to Thermal Effects and Cavitation Erosion

Development and Validation of An Automated Crank Press System Integrating the Stephenson II Six-Bar Linkage and Model Predictive Control

Moldir Kuatova, Amandyk Tuleshov, Akerke Baurzhan, Assylbek Jomartov, Yerkebulan Tuleshov and Olzhas Sayakov

Research Paper | published online: 14 Oct 2025

ES Materials and Manufacturing, 2025, 30, 1799
Development and Validation of An Automated Crank Press System Integrating the Stephenson II Six-Bar Linkage and Model Predictive Control

Crystal Growth, Characterization and Laser Performance of Solid-State Gain Media for the 3.9–4.5 μm Mid-Infrared Region

Enlin Cai, Xiangzheng Kong, Meng Jiang, Shuaiyi Zhang, Tao Li and Shanming Li

Review Paper | published online: 31 Dec 2025

ES Materials and Manufacturing, 2026, 31, 2004
Crystal Growth, Characterization and Laser Performance of Solid-State Gain Media for the 3.9–4.5 μm Mid-Infrared Region

Electrochemical Dissolution of Manganese Oxides from Manganese Ore in the Presence of Fe3+/Fe2+ and Ti4+/Ti3+ Redox Couples

A. Makhanbetov, B. Myrzabekov, T. Gaipov, Z. Assabayeva, F. Berdikulova and B. Abzhalov

Research Paper | published online: 11 May 2026

ES Materials and Manufacturing, 2026, 32, 2260
Electrochemical Dissolution of Manganese Oxides from Manganese Ore in the Presence of Fe3+/Fe2+ and Ti4+/Ti3+ Redox Couples

Damping Ratio Measurement through Modal Analysis of Smart Hybrid Nanocomposite Internal Damper to Absorb Critical Energy in Concrete Structures

Sandhya R Jalgar, Anand M Hunashyal and Balakrishna S Maddodi

Research Paper | published online: 13 Mar 2025

ES Materials and Manufacturing, 2025, 27, 1443
Damping Ratio Measurement through Modal Analysis of Smart Hybrid Nanocomposite Internal Damper to Absorb Critical Energy in Concrete Structures

Facile Fabrication of Hollow Silver-Gold Alloy Nanostructures Directly on Filter Paper for Enhanced Catalytic and Antibacterial Applications

Saima Shafique, Saira Arif, Unsia Batool, Israr Ahmed, Ghazanfar Ali Khan, Rabia Shahbaz, Muhammad Imran, Haider Butt, Jean-Francois Masson and Waqqar Ahmed

Research Paper | published online: 17 May 2025

ES Materials and Manufacturing, 2025, 28, 1505
Facile Fabrication of Hollow Silver-Gold Alloy Nanostructures Directly on Filter Paper for Enhanced Catalytic and Antibacterial Applications

Next-Generation Programmable Materials: Multifunctionality, Smart Integration, and Industrial Frontiers

Zakia Riaz and Kamran A. Khan

Review Paper | published online: 29 Sep 2025

ES Materials and Manufacturing, 2025, 29, 1755
Next-Generation Programmable Materials: Multifunctionality, Smart Integration, and Industrial Frontiers

Carbon Nanotubes Effect on The Electrical and Thermal Properties of Porous Silicon Carbide Ceramics

Shynar Malikovna Kultayeva, Bibol Yermuratovich Zhakipbayev, Zhangazy Nurzhanovich Moldamuratov and Zhansaya Aldabergenovna Lakhbayeva

Research Paper | published online: 14 Nov 2025

ES Materials and Manufacturing, 2025, 30, 1871
Carbon Nanotubes Effect on The Electrical and Thermal Properties of Porous Silicon Carbide Ceramics

In-Depth Unraveling of the Interfacial Bonding Strength Between Stainless Steel Bipolar Plates and Tantalum Carbide Coating: First-Principles Calculations

Lijie Zhang, Yinfa Zhu, Yunfeng Lin, Jiansheng Liu, Shuyang Chen and Jihui Huang

Research Paper | published online: 27 Jan 2026

ES Materials and Manufacturing, 2026, 31, 2026
In-Depth Unraveling of the Interfacial Bonding Strength Between Stainless Steel Bipolar Plates and Tantalum Carbide Coating: First-Principles Calculations

Progressive Collapse of Bridges: A Comprehensive Review Integrating Causes, Mitigation Strategies, Experimental Testing and Artificial Intelligence Revolution

Hanaa Maimouni, B. Kissi and H. Khatib

Review Paper | published online: 13 May 2026

ES Materials and Manufacturing, 2026, 32, 2267
Progressive Collapse of Bridges: A Comprehensive Review Integrating Causes, Mitigation Strategies, Experimental Testing and Artificial Intelligence Revolution

Highly Stretchable Self-Healing Nanocomposite Hydrogel Reinforced by 5 nm Particles

Xiaosai Hu, Rui Liang, Jun Li, Zhengping Liu and Guoxing Sun

Research Paper | published online: 29 Oct 2018

ES Materials and Manufacturing, 2018, 2, 16-23
Highly Stretchable Self-Healing Nanocomposite Hydrogel Reinforced by 5 nm Particles

Phonon Thermal Transport Properties of Graphene Periodically Embedded with Four- and Eight-membered Rings: a Molecular Dynamics Study

Chuanjiang Tang, Xiaoxiang Yu, Gen Li, Nuo Yang and Jingtao Lü

Cover Page Article | published online: 29 Jan 2018

ES Materials and Manufacturing, 2019, 3, 16-21
Phonon Thermal Transport Properties of Graphene Periodically Embedded with Four- and Eight-membered Rings: a Molecular Dynamics Study

Influence of Glycerol Additive on the Chemical Structure, Hydrophobicity, Morphology and Optical Properties of Sol-gel Based Zirconia Coatings

Uzma K. H. Bangi, Rabiya S. Gafari, Rajendra C. Pawar, Hae-Noo-Ree Jung and Hyung-Ho Park

Research Paper | published online: 16 Nov 2020

ES Materials and Manufacturing, 2020, 10, 16-21
Influence of Glycerol Additive on the Chemical Structure, Hydrophobicity, Morphology and Optical Properties of Sol-gel Based Zirconia Coatings

Chemically Deposited NiCo2O4 Thin Films for Electrochemical Study

Ramesh J. Deokate

Communication | published online: 19 Nov 2020

ES Materials and Manufacturing, 2021, 11, 16-19
Chemically Deposited NiCo2O4 Thin Films for Electrochemical Study

Revolutionising Dual Therapy: Biodegradable Polymers for Sustained Metformin and Alendronate Delivery in Chronic Illness Management

N. Archana, S. Giridhar Reddy, B Siva Kumar, Zhanhu Guo and Xingkui Guo

Research Paper | published online: 06 Jun 2025

ES Materials and Manufacturing, 2025, 28, 1556
Revolutionising Dual Therapy: Biodegradable Polymers for Sustained Metformin and Alendronate Delivery in Chronic Illness Management

Atomistic Modeling of Graphene Oxide and Epoxy Resin Composite for Wind Turbine Applications

Adilkhan Zhiyengali, Kuanysh Abzhaparov, Gaukhar Kabdrakhimova, Fatima Abuova, Almira Zhakupova, Maksat Temirkhan, Bakytzhan Sariyev, Christos Spitas, Nurlan Almas and Andas Amrin

Research Paper | published online: 10 Jun 2025

ES Materials and Manufacturing, 2025, 28, 1567
Atomistic Modeling of Graphene Oxide and Epoxy Resin Composite for Wind Turbine Applications

Study of the Degradation Kinetics of Strength Properties of Multilayer Oxy-nitride Coatings during Hydrogenation

R. Suleimenova, G. Zh. Moldabayeva, А. L. Kozlovskiy,  Z. Toktarbay, A. Kuanyshev and M. Zhaxylykova
 

Research Paper | published online: 10 Sep 2025

ES Materials and Manufacturing, 2025, 29, 1708
Study of the Degradation Kinetics of Strength Properties of Multilayer Oxy-nitride Coatings during Hydrogenation

Sintering Atmosphere and Polytype Effects on Porous Silicon Carbide Ceramics 

Shynar Malikovna Kultayeva, Bibol Yermuratovich Zhakipbayev, Zhangazy Nurzhanovich Moldamuratov, Hyun-Sik Kim and Nazgul Akimbayeva

Research Paper | published online: 30 Sep 2025

ES Materials and Manufacturing, 2025, 29, 1757
Sintering Atmosphere and Polytype Effects on Porous Silicon Carbide Ceramics 

Eco-friendly Simultaneous Dyeing and Synthesis of Silver Nanoparticles on Silk Yarn Using Anthocyanin Extracts from Melastoma malabathricum L. Fruits 

Montra Chairat, Natthaphong Naksithong, Areeya Langthoh, Pattarapond Gonil, Choochart Warin, Warayuth Sajomsang and John B. Bremner

Research Paper | published online: 14 Nov 2025

ES Materials and Manufacturing, 2025, 30, 1873
Eco-friendly Simultaneous Dyeing and Synthesis of Silver Nanoparticles on Silk Yarn Using Anthocyanin Extracts from Melastoma malabathricum L. Fruits 

Orthophosphates Synthetized from Calcium and Calcium Magnesium Phosphates, Types of Resources and Applications: A Review

Sandra Milena Restrepo Arcila, Henry Alonso Colorado Lopera and Marco Antonio Márquez Godoy

Review Paper | published online: 29 Dec 2025

ES Materials and Manufacturing, 2026, 31, 1997
Orthophosphates Synthetized from Calcium and Calcium Magnesium Phosphates, Types of Resources and Applications: A Review

Investigating Tool Wear and Surface Roughness in Turning of TiC and Gr Reinforced Al-2024

Manar Assaf Al-Kinani and Saad Hameed Al-Shafaie

Research Paper | published online: 05 Jun 2026

ES Materials and Manufacturing, 2026, 32, 2341
Investigating Tool Wear and Surface Roughness in Turning of TiC and Gr Reinforced Al-2024

Deep Learning for Medical Materials: Review and Perspective

Yangjie Qi and Chang Liu

Review Paper | published online: 14 Feb 2021

ES Materials and Manufacturing, 2021, 12, 17-28

Deep Learning for Medical Materials: Review and Perspective

Effect of Cryogenic Treatment on the Machinability of Impax Supreme Steel and Optimization of Machining Parameters

Fuat Kara, Nursel Altan Özbek and Onur Özbek

Research Paper | published online: 31 Mar 2025

ES Materials and Manufacturing, 2025, 27, 1457
Effect of Cryogenic Treatment on the Machinability of Impax Supreme Steel and Optimization of Machining Parameters

Investigation of Waste-Based Self-Compacting Concrete: Analysis of Rheology and Hydration with Silica Fume and Fly Ash

Meiram M. Begentayev, Erzhan I. Kuldeyev, Zhanar O. Zhumadilova, Daniyar A. Akhmetov, Aigerim K. Tolegenova, Adlet M. Zhagifarov, Ruslan E. Nurlybayev and Abzal Alikhan 

Research Paper | published online: 17 May 2025

ES Materials and Manufacturing, 2025, 28, 1498
Investigation of Waste-Based Self-Compacting Concrete: Analysis of Rheology and Hydration with Silica Fume and Fly Ash

Preparation of Polymer-based Composite Films using Cellulose Derived from Agricultural Waste

Yerkebulan A. Altynov, Bibigul U. Rakhimova, Ulan Zhantikeyev, Kalampyr S. Bexeitova, Seitkhan Azat, Meruyert Nazhipkyzy and Кenes К. Kudaibergenov

Research Paper | published online: 21 Jul 2025

ES Materials and Manufacturing, 2025, 29, 1631
Preparation of Polymer-based Composite Films using Cellulose Derived from Agricultural Waste

Effect of Adding Nano-Hexagonal Boron Nitride-Zinc Oxide on the Aggregated Structure and Properties of Cross-Linked Polyethylene Composites

Guang Yu, Lijie Peng and Yujia Cheng

Research Paper | published online: 29 Nov 2025

ES Materials and Manufacturing, 2025, 30, 1911
Effect of Adding Nano-Hexagonal Boron Nitride-Zinc Oxide on the Aggregated Structure and Properties of Cross-Linked Polyethylene Composites

Transgressions and Regressions of the Mesozoic and their Role in the Formation of Bar Reservoirs in the Northern Part of the Turan Plate: New Prospects for Hydrocarbon Exploration

R. H. Uzbekgaliev, M. Kaldybekova, Ahmed N. Al-Dujaili, N. Tileuberdi, K. Togizov, T.A. Ensepbayev, M. Sergazyuly and M. Sanatbekov

Review Paper | published online: 20 Jan 2026

ES Materials and Manufacturing, 2026, 31, 2015
Transgressions and Regressions of the Mesozoic and their Role in the Formation of Bar Reservoirs in the Northern Part of the Turan Plate: New Prospects for Hydrocarbon Exploration

Fabrication of Edible Film Derived from Arenga pinnata Starch using Polyethylene Glycol as Plasticizer and Carboxymethyl Cellulose as Additive

Prima Astuti Handayani, Nuni Widiarti, Maulida Zakia, Pingky Yogi Novitasari, Muhammad Jiddan, Dwi Kharisma Luthfiani and Ade Rahmania Yuningsih

Research Paper | published online: 13 May 2026

ES Materials and Manufacturing, 2026, 32, 2270
Fabrication of Edible Film Derived from Arenga pinnata Starch using Polyethylene Glycol as Plasticizer and Carboxymethyl Cellulose as Additive

Sintering Behavior and Microwave Dielectric Properties of Low-Loss Li6Mg7Zr3O16 Ceramics Doped with Different LiF Additives

Huarong Tian, Chunfang Xing, Haitao Wu and Zhihao Wang

Communication | published online: 09 Dec 2019

ES Materials and Manufacturing, 2019, 6, 18-23
Sintering Behavior and Microwave Dielectric Properties of Low-Loss Li6Mg7Zr3O16 Ceramics Doped with Different LiF Additives

Effect of Ultrasonic Irradiation Treatment on the Composites of Polyaniline/Cadmium Sulfide

Ravi V. Ingle, Jupinder Kaur, Prasad E. Lokhande, Vilas A. Tabhane and Habib M. Pathan

Research Paper | published online: 18 Feb 2022

ES Materials and Manufacturing, 2022, 18, 18-24
Effect of Ultrasonic Irradiation Treatment on the Composites of Polyaniline/Cadmium Sulfide

Label-Free Photoelectrochemical Bismuth Tungstate/Titanium Dioxide Composite Heterojunction Platform for Detecting Alpha-Fetoprotein

Xiaoqing Xu, Tao Jing, Haiyan Qi, Yunpeng Zhao, Chunqi Zhao, Min Wu, Xingkui Guo and Mohamed Kallel

Research Paper | published online: 30 May 2025

ES Materials and Manufacturing, 2025, 28, 1542
Label-Free Photoelectrochemical Bismuth Tungstate/Titanium Dioxide Composite Heterojunction Platform for Detecting Alpha-Fetoprotein

Effect of Volume Energy Density on Isothermal Crystallization Behavior of a Laser-Melted Zirconium-Based Metallic Glassy Composite

Qi An, Rui Li, Yalin Hu, Yun Luo and Anhui Cai

Research Paper | published online: 29 Sep 2025

ES Materials and Manufacturing, 2025, 29, 1754
Effect of Volume Energy Density on Isothermal Crystallization Behavior of a Laser-Melted Zirconium-Based Metallic Glassy Composite

Effect of Sheet Thickness and Strength of Dual-Phase Steels (DP600, DP780, DP980) on the Quality of Roll-Formed U-Profiles

Choon Kit chan, Dayanand P. Yesane, R. V. Bhortake, Prateek D. Malwe, Ashish D. Urade, Naresh Jaiswal, Subhav Singh, Deekshant Varshney, Arunkumar Bongale, B. T. Ramesh and Chandrakant Sonawane

Research Paper | published online: 24 Nov 2025

ES Materials and Manufacturing, 2025, 30, 1898
Effect of Sheet Thickness and Strength of Dual-Phase Steels (DP600, DP780, DP980) on the Quality of Roll-Formed U-Profiles

An Overview of Utilizing Red Mud and Slag in Road Base Stabilization

Yelaman Kanatovich Aibuldinov, Galiya Zhanzakovna Alzhanova, Zhanar Baktybaevna Iskakova, Gaziz Galymovich Abdiyussupov and Madi Toktasynuly Omirzak

Review Paper | published online: 27 Dec 2025

ES Materials and Manufacturing, 2026, 31, 1994
An Overview of Utilizing Red Mud and Slag in Road Base Stabilization

In-situ Preload Detection Method for Flange Bolts Based on Ultrasonic Frequency Domain Feature Fusion

Liming Zhong, Qi Zuo, Xiaogang Du and Da Lei

Research Paper | published online: 14 May 2026

ES Materials and Manufacturing, 2026, 32, 2281
In-situ Preload Detection Method for Flange Bolts Based on Ultrasonic Frequency Domain Feature Fusion

Effects of CuO Nanoparticles on the Growth of Kale

Javier Vassell, Alexis Racelis and Yuanbing Mao

Communication | published online: 13 Mar 2019

ES Materials and Manufacturing, 2019, 5, 19-23
Effects of CuO Nanoparticles on the Growth of Kale

Zinc Oxide/Graphene Oxide Nanocomposites: Synthesis, Characterization and Their Optical Properties

Avinash R. Kachere, Prashant M. Kakade, Archana R. Kanwade, Priyanka Dani, Nandkumar T. Mandlik, Sachin R. Rondiya, Nelson Y. Dzade, Sandesh R. Jadkar  and Shivaji V. Bhosale

Research Paper | published online: 26 Aug 2021

ES Materials and Manufacturing, 2022, 16, 19-29
Zinc Oxide/Graphene Oxide Nanocomposites: Synthesis, Characterization and Their Optical Properties

Optimization of Degradable Polylactic Acid-Based Coating Materials for Sustainable Wire Manufacturing Injection Process Using Computational Fluid Dynamics Analysis

Kriengkrai Nabudda, Rattanaporn Promjariyakoon, Nustha Kitprathaung, Wirote Ritthong, Sontinan Intasonti and Pongthep Poungthong

Research Paper | published online: 27 May 2025

ES Materials and Manufacturing, 2025, 28, 1532
Optimization of Degradable Polylactic Acid-Based Coating Materials for Sustainable Wire Manufacturing Injection Process Using Computational Fluid Dynamics Analysis

Extraction of High-purity Cu Powders from Copper-Zirconium-Titanium Ternary Alloy

Q. An, R. Li, Y.L. Hu, Y. Luo, A.H. Cai, H. Mao and S. Li

Research Paper | published online: 29 Sep 2025

ES Materials and Manufacturing, 2025, 29, 1752
Extraction of High-purity Cu Powders from Copper-Zirconium-Titanium Ternary Alloy

Study of Electrical Tree Growth Properties in Cross-Linked Polyethylene

Guang Yu, Lijie Peng and Yujia Cheng

Research Paper | published online: 10 Dec 2025

ES Materials and Manufacturing, 2025, 30, 1933
Study of Electrical Tree Growth Properties in Cross-Linked Polyethylene

Effect of Nano/Micro-Silica Hybrid System and Functionalized Liquid Rubber Modification on Tire Tread Composite Properties

Guanyue Zeng, Lingfeng Cui, Hai Wang, Juqiao Su and Yuzhu Xiong

Research Paper | published online: 30 Dec 2025

ES Materials and Manufacturing, 2026, 31, 1999
Effect of Nano/Micro-Silica Hybrid System and Functionalized Liquid Rubber Modification on Tire Tread Composite Properties

An Experimental Study on the Mechanical Performance and Vibration Response of Annealed Inconel 625 Superalloy

Ahmad Al-Qaisia, Safwan Al-Qawabah, Mike Kh Haddad and Nabeel Alshabatat

Research Paper | published online: 21 May 2026

ES Materials and Manufacturing, 2026, 32, 2302
An Experimental Study on the Mechanical Performance and Vibration Response of Annealed Inconel 625 Superalloy

Synthetic of Polydivinylbenzene Block Hyperbranched Polyethylene Copolymers via Atom Transfer Radical Polymerization

Shiyun Li, Ling Zhang, Shang Shang, Haijun Zhou, JiaoXia Zhang, Peixin Wei, Haifeng Xue, Xian Hu and Jianping Wang

Research Paper | published online: 18 Apr 2019

ES Materials and Manufacturing, 2019, 4, 20-24
Synthetic of Polydivinylbenzene Block Hyperbranched Polyethylene Copolymers via Atom Transfer Radical Polymerization

Synergistic Effect of P[MPEGMA-IL] Modified Graphene on Morphology and Dielectric Properties of PLA/PCL Blends

Yiyang Zhou, Ping Wang, Gang Ruan, Pei Xu and Yunsheng Ding

Research Paper | published online: 27 Oct 2020

ES Materials and Manufacturing, 2021, 11, 20-29
Synergistic Effect of P[MPEGMA-IL] Modified Graphene on Morphology and Dielectric Properties of PLA/PCL Blends

Machine Learning Regression Guided Thermoelectric Materials Discovery – A Review

Guangshuai Han, Yixuan Sun, Yining Feng, Guang Lin and Na Lu

Review Paper | published online: 10 Apr 2021

ES Materials and Manufacturing, 2021, 14, 20-35
Machine Learning Regression Guided Thermoelectric Materials Discovery – A Review

Studies of Influence of Lithological Composition of Overburden Rock on Colmation Process in Open-Type Infiltration Basins

A. Zh. Ismagulova, M. M. Begentayev and Nurbol Tileuberdi

Research Paper | published online: 24 Apr 2025

ES Materials and Manufacturing, 2025, 28, 1473
Studies of Influence of Lithological Composition of Overburden Rock on Colmation Process in Open-Type Infiltration Basins

Space-Grade Polyimide Composites: A State-of-the-Art Review on Radiation Degradation Mechanisms and Advanced Shielding Strategies for Orbital Sustainability

Yuwei Chen, Jiyu Lei, Heng Jiang, Kai Li, Wanyi Tan, Jintao Huang, Yonggang Min and Yidong Liu 

Review Paper | published online: 20 Aug 2025

ES Materials and Manufacturing, 2025, 29, 1684
Space-Grade Polyimide Composites: A State-of-the-Art Review on Radiation Degradation Mechanisms and Advanced Shielding Strategies for Orbital Sustainability

Effect of Dynamic Pressure on Microstructure and Properties of W-10Ti Alloy Targets by Dynamic Sintering and Forging

Ka Gao, Yuan Rao, Songda Wu, Zixiang Zhang, Wei Chen, Ziheng Gao, Furong Xie, Yufan Tang, Yanghu Hu, Hailong Wang, Chunlian Lee, Xiaoqin Guo and Linan An

Research Paper | published online: 09 Dec 2025

ES Materials and Manufacturing, 2025, 30, 1931
Effect of Dynamic Pressure on Microstructure and Properties of W-10Ti Alloy Targets by Dynamic Sintering and Forging

Effects and Applications of Additives in Nickel Electrodeposition: A Review

Daniel M. Zellele, Gulmira S. Yar-Mukhamedova and Małgorzata Rutkowska-Gorczyca

Review Paper | published online: 19 Feb 2026

ES Materials and Manufacturing, 2026, 31, 2080
Effects and Applications of Additives in Nickel Electrodeposition: A Review

Mechanical and Durability Performance of Sustainable Interlocking Bricks with Crumb Rubber Addition

Ekkachai Yooprasertchai, Burachat Chatveera, Gritsada Sua-Iam, Panumas Saingam, Satish Paudel and Panuwat Joyklad

Research Paper | published online: 16 May 2026

ES Materials and Manufacturing, 2026, 32, 2285
Mechanical and Durability Performance of Sustainable Interlocking Bricks with Crumb Rubber Addition

Thermal Studies of Three-Dimensional Printing Using Pulsed Laser Heating

Yue Xiao, Zhihan Hong, Garret Coleman Hongbo Zhao, Rongguang Liang, Pierre Lucas and Qing Hao

Invited Research Article | published online: 25 Sep 2018

ES Materials and Manufacturing, 2018, 1, 21-26
Thermal Studies of Three-Dimensional Printing Using Pulsed Laser Heating

Efficient Solvent-Free Microwave Irradiation Synthesis of Highly Conductive Polypropylene Nanocomposites with Lowly Loaded Carbon Nanotubes

Xingru Yan, Jingjing Liu, Mojammel Alam Khan, Stephen Sheriff, Sravanthi Vupputuri, Rajib Das, Luyi Sun, David P. Young and Zhanhu Guo

Research Paper | published online: 08 Jul 2020

ES Materials and Manufacturing, 2020, 9, 21-33
Efficient Solvent-Free Microwave Irradiation Synthesis of Highly Conductive Polypropylene Nanocomposites with Lowly Loaded Carbon Nanotubes

Study of the Hydrometallurgical Processing of Jarosite Residues

Lyazat Liakyn, Zhanar Onalbayeva, Gulzhan Daumova, Bekzat Saurbayeva, Roza Aubakirova and Altynsary Bakirov

Research Paper | published online: 05 Dec 2025

ES Materials and Manufacturing, 2025, 30, 1920
Study of the Hydrometallurgical Processing of Jarosite Residues

A Review on Synthesis, Characterization and Antimicrobial Evaluation of Transition Metal Oxide Nanoparticles for Advanced Gas Sensing and Modern Textile Applications

Neeraj R. Prasad, P. R. Birmule, V. B. Helavi, Saurabh R. Prasad, Anil Powar, M. N. Padvi, Avinash Harale,  Yogesh Mane, A. A. Mohite and B. S. Watve

Research Paper | published online: 12 Mar 2026

ES Materials and Manufacturing, 2026, 31, 2136
A Review on Synthesis, Characterization and Antimicrobial Evaluation of Transition Metal Oxide Nanoparticles for Advanced Gas Sensing and Modern Textile Applications

Corrosion and Stress Corrosion Cracking Behaviors of EH40 Steel in Typical Polar Environments

Pengyu Wei, Congcong Liu, Pingyi Guo, Yinhui Lei, Lian Wang, Ruonan Zhang, Qiang Liao and Qingbo Zeng

Research Paper | published online: 21 May 2026

ES Materials and Manufacturing, 2026, 32, 2303
Corrosion and Stress Corrosion Cracking Behaviors of EH40 Steel in Typical Polar Environments

Optimization of DC-Magnetron Sputtered Molybdenum (Mo) thin Film Electrodes for Electrodeposited CZTS Solar Cells

Haribhau Borate, Avinash Rokade, Subhash Pandharkar, Ravindra Waykar, Bharat Gabhale, Ajinkya Bhorde, Rahul Aher, Shruthi Nair, Priti Vairale and Sandesh Jadkar

Research Paper | published online: 28 Jan 2018

ES Materials and Manufacturing, 2019, 3, 22-28
Optimization of DC-Magnetron Sputtered Molybdenum (Mo) thin Film Electrodes for Electrodeposited CZTS Solar Cells

Effect of Copper Content on Structural, Morphological, Optical and Photoelectrochemical Properties of SILAR Deposited Cu3SnS4 Thin Films

Harshad D. Shelke, Abhishek C. Lokhande, Jin H. Ki and Chandrakant D. Lokhande

Research Paper | published online: 08 Nov 2020

ES Materials and Manufacturing, 2020, 10, 22-28
Effect of Copper Content on Structural, Morphological, Optical and Photoelectrochemical Properties of SILAR Deposited Cu3SnS4 Thin Films

Dynamics of Hydrogeochemical Infiltration During Artificial Groundwater Recharge in Daily Regulation Basins: A Case Study of the Lepsinsky Experimental Site 

Aida Ismagulova, Vitaly Kulagin, Adiya Zhumabek, Nurbol Itemen, Nurbol Tileuberdi, Ahmed N. Al-Dujaili and Aigul Issagaliyeva

Research Paper | published online: 13 Jun 2025

ES Materials and Manufacturing, 2025, 28, 1574
Dynamics of Hydrogeochemical Infiltration During Artificial Groundwater Recharge in Daily Regulation Basins: A Case Study of the Lepsinsky Experimental Site 

Effect of Production Conditions on Composition and Properties of Phosphating Solutions Based on Kazakhstan Ore Dressing Wastes

Sh. N. Kubekova, A. S. Raimbekova, V. I. Kapralova, A. Dalbanbay, Zn. Kuli, V. E. Kuznetsov and E. A. Varol

Research Paper | published online: 30 Nov 2025

ES Materials and Manufacturing, 2025, 30, 1913
Effect of Production Conditions on Composition and Properties of Phosphating Solutions Based on Kazakhstan Ore Dressing Wastes

Advances and Applications of Phase Change Materials (PCMs) and PCMs-based Technologies

 

Jintao Huang, Yue Luo, Mengman Weng, Jingfang Yu, Luyi Sun, Hongbo Zeng, Yidong Liu, Wei Zeng, Yonggang Min and Zhanhu Guo

Review Paper | published online: 21 Apr 2021

ES Materials and Manufacturing, 2021, 13, 23-39
Advances and Applications of Phase Change Materials (PCMs) and PCMs-based Technologies

 

Investigation on Crack Recovery Behavior of Engineered Cementitious Composite (ECC) Incorporated Memory Alloy Fiber at Low Temperature

Mengfan Song, Jinbang Wang, Lianwang Yuan, Congqi Luan and Zonghui Zhou

Research Paper | published online: 22 Feb 2022

ES Materials and Manufacturing, 2022, 17, 23-33
Investigation on Crack Recovery Behavior of Engineered Cementitious Composite (ECC) Incorporated Memory Alloy Fiber at Low Temperature

Mechanism of Cement Stone Damage by Hydrogen Sulfide in Oil and Gas Wells

F. Agzamov, G. Moldabayeva, A. Syzdykov, N. S. Buktukov, N. Tileuberdi, A. Bakesheva and B. Baluanov

Research Paper | published online: 16 Jun 2025

ES Materials and Manufacturing, 2025, 28, 1584
Mechanism of Cement Stone Damage by Hydrogen Sulfide in Oil and Gas Wells

Optimizing Cold Roll Forming Parameters for High-Quality Advanced High-Strength Steel DP980 Products: A Design of Experiments Approach 

Dayanand P. Yesane, R. V. Bhortake, Prateek Malwe, Choon Kit Chan, Chandrakant Sonawane, Atul Kulkarni, Subhav Singh, Deekshant Varshney and Anand Patel

Research Paper | published online: 07 Nov 2025

ES Materials and Manufacturing, 2025, 30, 1860
Optimizing Cold Roll Forming Parameters for High-Quality Advanced High-Strength Steel DP980 Products: A Design of Experiments Approach 

TiO2/Cyclodextrin Hybrid Structure with Efficient Photocatalytic Water Splitting

Siyao Guo, Jun Shang, Tiejun Zhao, Dongshuai Hou, Zuquan Jin and Guoxing Sun

Communication | published online: 30 Nov 2018

ES Materials and Manufacturing, 2018, 2, 24-27
TiO2/Cyclodextrin Hybrid Structure with Efficient Photocatalytic Water Splitting

Facile One-pot Synthesis of Silver Nanoparticles Supported on α-Zirconium Phosphate Single-Layer Nanosheets

Jingfang Yu and Luyi Sun

Communication | published online: 21 May 2019

ES Materials and Manufacturing, 2019, 5, 24-28
Facile One-pot Synthesis of Silver Nanoparticles Supported on α-Zirconium Phosphate Single-Layer Nanosheets

Annealing Studies of Nanoporous Si Thin Films Fabricated by Dry Etch

Qing Hao, Yue Xiao and Fabian Javier Medina

Communication | published online: 18 Dec 2019

ES Materials and Manufacturing, 2019, 6, 24-27
Annealing Studies of Nanoporous Si Thin Films Fabricated by Dry Etch

Study on MA(Pb,Cu)Br3 Provskite Nanocrystal with Both Controlled Color Emission and Improved Stability

Bin Liu, Min Ji, Jinkai Li, Pengkun Hou, Yizhong Lu, Qinggang Li, Bingqiang Cao and Zongming Liu

Research Paper | published online: 15 May 2020

ES Materials and Manufacturing, 2020, 8, 24-30
Study on MA(Pb,Cu)Br3 Provskite Nanocrystal with Both Controlled Color Emission and Improved Stability

Heat Transfer Enhancement in Agitated Reactors through Impeller Geometry Modifications: Experimental and Computational Fluid Dynamics Approaches

Phaiboon Boupha, Ponthep Vengsungnle, Aphichat Srichat, Chaiyan Junsiri, Kittipong Laloon, Sakkarin Wangkahart, Kaweepong Hongtong and Sahassawas Poojeera

Research Paper | published online: 23 Jun 2025

ES Materials and Manufacturing, 2025, 28, 1592
Heat Transfer Enhancement in Agitated Reactors through Impeller Geometry Modifications: Experimental and Computational Fluid Dynamics Approaches

Comparative Study of a New Sodium-Bentonite Clay for Use in the Pharmaceutical Industry

Madiar Beisebekov, Sana Kabdrakhmanova, Nurgamit Kantay, Aryp Kadiran, Saule Nauryzova, Esbol Shaimardan, Kydyrmolla Akatan, Anastassiya Kukhareva, Aigul Baibotayeva, Zhansaya Lakhbayeva and Tulegen Seilkhanov

Research Paper | published online: 16 Dec 2025

ES Materials and Manufacturing, 2025, 30, 1954
Comparative Study of a New Sodium-Bentonite Clay for Use in the Pharmaceutical Industry

Theoretical Analysis and Experimental Realization of Highly Effective Acceptor Ionization in GaN via Mg Co-doped with 4d-Element (In)

Zhiqiang Liu, Xiaoyan Yi, Junxi Wang, Ian Ferguson, Na Lu and Jinmin Li

Research Paper | published online: 22 Feb 2019

ES Materials and Manufacturing, 2019, 4, 25-30
Theoretical Analysis and Experimental Realization of Highly Effective Acceptor Ionization in GaN via Mg Co-doped with 4d-Element (In)

The Doping of Alkali Metal for Halide Perovskites

Jintian Jiang, Jing Xu, Huddoy Walter, Abul Kazi, Daoyuan Wang, Grant Wangila, Mansour Mortazavi, Chao Yan and Qinglong Jiang

Review Paper | published online: 17 Jan 2020

ES Materials and Manufacturing, 2020, 7, 25-33
The Doping of Alkali Metal for Halide Perovskites

Pattern Recognition for the Electronic Phase of Bismuth Antimony Thin Films

Shuang Tang, Lucy Dow and Emmanuel Ojukwu

Research Paper | published online: 22 Feb 2022

ES Materials and Manufacturing, 2022, 18, 25-32
Pattern Recognition for the Electronic Phase of Bismuth Antimony Thin Films

Magnetic Multiwalled Carbon Nanotubes with Ion-Imprinted Polymer Coating for Precious Metal (Ag+) Recovery from Aqueous Solutions: Isotherm, Kinetic, and Thermodynamic Analysis

Elahe Kasiri, Hedayat Haddadi and Arash Asfaram

Research Paper | published online: 22 May 2025

ES Materials and Manufacturing, 2025, 28, 1524
Magnetic Multiwalled Carbon Nanotubes with Ion-Imprinted Polymer Coating for Precious Metal (Ag+) Recovery from Aqueous Solutions: Isotherm, Kinetic, and Thermodynamic Analysis

Modulated Rate (Time) – Dependent Strain Hardening of Ag/Bi2223 Composite Wire Flattened in a Low – Strength AgMg Alloy Matrix

Malik I. Adam and Paolo Mele

Research Paper | published online: 05 Sep 2018

ES Materials and Manufacturing, 2018, 1, 27-34
Modulated Rate (Time) – Dependent Strain Hardening of Ag/Bi2223 Composite Wire Flattened in a Low – Strength AgMg Alloy Matrix

Advancements in Coating Methods and Properties of Titanium-Based Composite Coatings: A Review

Gulmira Sh. Yar-Mukhamedova, Daniel M. Zellele, Małgorzata Rutkowska-Gorczyca, Ibragim Makhambet, Gauhar Mussabek, Rustem Atchibayev and Aiman Kemelzhanova

Review Paper | published online: 11 Jun 2025

ES Materials and Manufacturing, 2025, 28, 1569
Advancements in Coating Methods and Properties of Titanium-Based Composite Coatings: A Review

Sustainable Cross-linked Porous Corn Starch Adsorbents with High Methyl Violet Adsorption

Huige Wei, Junhui Ma, Yapeng Shi, Dapeng Cui, Mingzhu Liu, Na Lu, Ning Wang, Tingting Wu, Evan K. Wujcik and Zhanhu Guo

Research Paper | published online: 28 Nov 2018

ES Materials and Manufacturing, 2018, 2, 28-34
Sustainable Cross-linked Porous Corn Starch Adsorbents with High Methyl Violet Adsorption

A New Machine Learning Algorithm to Optimize A Reduced Mechanism of 2-Butanone and the Comparison with Other Algorithms

Yunpeng Wang, Shibo Liu, Jia Cheng, Xiao Wan, Wentao Feng, Nuo Yang and Chun Zou

Research Paper | published online: 23 Dec 2019

ES Materials and Manufacturing, 2019, 6, 28-37
A New Machine Learning Algorithm to Optimize A Reduced Mechanism of 2-Butanone and the Comparison with Other Algorithms

Synthesis of Silver Nanoparticles Using Biopolymers for Cultivation of Chlorella vulgaris Protein Biomass

Zhanar Kassymova, Lazzyat Orazzhanova, Dastan Asserzhanov, Zhanar Nurtazina, Aigul Sapakova, Alfira Sabitova, Nurzhan Nurgaliyev 

Research Paper | published online: 14 Jun 2025

ES Materials and Manufacturing, 2025, 28, 1576
Synthesis of Silver Nanoparticles Using Biopolymers for Cultivation of Chlorella vulgaris Protein Biomass

Effect of Different Processing Routes on the Power Factor of the Filled Skutterudite Smy(FexNi1-x)4Sb12 (x = 0.50-0.80; y = 0.12-0.53)

Cristina Artini, Giovanna Latronico, Riccardo Carlini, Shrikant Saini, Tsunehiro Takeuchi, Seongho Choi, Angelica Baldini, Umberto Anselmi-Tamburini, Fabrizio Valenza and Paolo Mele

Research Paper | published online: 17 Jun 2019

ES Materials and Manufacturing, 2019, 5, 29-37
Effect of Different Processing Routes on the Power Factor of the Filled Skutterudite Smy(FexNi1-x)4Sb12 (x = 0.50-0.80; y = 0.12-0.53)

High Adsorption Performance of Methyl Blue from Aqueous Solution using Hyper-branched Polyethyleneimine Grafted MWCNTs as an Adsorbent

Jie Song, Yulei Wang and Jun Qiu

Research Paper | published online: 23 Dec 2018

ES Materials and Manufacturing, 2019, 3, 29-37
High Adsorption Performance of Methyl Blue from Aqueous Solution using Hyper-branched Polyethyleneimine Grafted MWCNTs as an Adsorbent

Polydimethylsiloxane Resin Nanocomposite Coating with Alternating Multilayer Structure for Corrosion Protection Performance

Jianping Liu, Jiaoxia Zhang, Jijun Tang, Liuyue Pu, Yanli Xue, Meiqun Lu, Lei Xu and Zhanhu Guo

Research Paper | published online: 05 Sep 2020

ES Materials and Manufacturing, 2020, 10, 29-38
Polydimethylsiloxane Resin Nanocomposite Coating with Alternating Multilayer Structure for Corrosion Protection Performance

Effect of Graphene on Microstructure and Mechanical Properties of Si3N4/SiC Ceramics

Hailing Yang, Qinggang Li, Zhi Wang, Hao Wu, Yuying Wu, Pengkun Hou and Xin Cheng

Research Paper | published online: 02 Feb 2021

ES Materials and Manufacturing, 2021, 12, 29-34
Effect of Graphene on Microstructure and Mechanical Properties of Si3N4/SiC Ceramics

Bismuth(III) Telluride and Graphite Nanoplatelets Composite: Manufacturing, Characterization, and Thermoelectric Properties

Manuela Castañeda, Franklin Jaramillo and Henry A. Colorado

Research Paper | published online: 29 May 2025

ES Materials and Manufacturing, 2025, 28, 1538
Bismuth(III) Telluride and Graphite Nanoplatelets Composite: Manufacturing, Characterization, and Thermoelectric Properties

Single-step Electrochemical Deposition of CZTS Thin Films with Enhanced Photoactivity

Haribhau Borate, Ajinkya Bhorde, Ashish Waghmare, Shruthi Nair, Subhash Pandharkar, Ashvini Punde, Pratibha Shinde, Priti Vairale, Vijaya Jadkar, Ravindra Waykar, Sachin Rondiya, Yogesh Hase, Rahul Aher, Nilesh Patil, Mohit Prasad and Sandesh Jadkar

Research Paper | published online: 10 Dec 2020

ES Materials and Manufacturing, 2021, 11, 30-39
Single-step Electrochemical Deposition of CZTS Thin Films with Enhanced Photoactivity

Friction Control of Chitosan-Ag Hydrogel by Silver Ion

Jing Hua, Marcus Björling, Roland Larsson and Yijun Shi

Research Paper | published online: 27 Oct 2021

ES Materials and Manufacturing, 2022, 16, 30-36
Friction Control of Chitosan-Ag Hydrogel by Silver Ion

Silver Nanoparticles in Plasmonic Solar Cells: A Review

Farhana Parveen, Prathamesh Kadam, Almas Mujawar, Basavaraja Sannakki, Shashikant Patole, Zijian Wu, Mohamed Kallel and Habib Pathan

Review Paper | published online: 04 Jun 2025

ES Materials and Manufacturing, 2025, 28, 1548
Silver Nanoparticles in Plasmonic Solar Cells: A Review

Self-Healing Polymer Composites Based on Hydrogen Bond Reinforced with Graphene Oxide

Yue Chen, Ying Wang, Tai Su, Jiayi Chen, Chao Zhang, Xiaoxing Lai, Dawei Jiang, Zijian Wu, Caiying Sun, Bin Li and Zhanhu Guo

Research Paper | published online: 16 Mar 2019

ES Materials and Manufacturing, 2019, 4, 31-37
Self-Healing Polymer Composites Based on Hydrogen Bond Reinforced with Graphene Oxide

Optical and Structural Properties of Nickel Doped Zinc Oxide Grown by Metal Organic Chemical Vapor Deposition (MOCVD) at Different Reaction Chamber Conditions

Zahra Manzoor, Vishal Saravade, Alexis Margaret Corda, Ian Ferguson and Na Lu

Research Paper | published online: 10 May 2020

ES Materials and Manufacturing, 2020, 8, 31-35
Optical and Structural Properties of Nickel Doped Zinc Oxide Grown by Metal Organic Chemical Vapor Deposition (MOCVD) at Different Reaction Chamber Conditions

Effect of Bonding Interface Treatment on Bonding Property of Modified Supersulfated Cement Mortar

Peng Du, Feihan Jia, Xumin Li, Wenhui Fang, Yiming Zhou, Mohamed Elchalakani, Pengkun Hou, Jinbang Wang, Zonghui Zhou and Xin Cheng

Research Paper | published online: 12 Jun 2022

ES Materials and Manufacturing, 2022, 18, 33-44
Effect of Bonding Interface Treatment on Bonding Property of Modified Supersulfated Cement Mortar

Fabrication of N, P-codoped Mo2C/Carbon Nanofibers via Electrospinning as Electrocatalyst for Hydrogen Evolution Reaction

Pan Yang, Hexi Zhao, Yingnan Yang, Pengxiang Zhao, Xiaochong Zhao and Lijun Yang

Communication | published online: 10 Jan 2020

ES Materials and Manufacturing, 2020, 7, 34-39
Fabrication of N, P-codoped Mo2C/Carbon Nanofibers via Electrospinning as Electrocatalyst for Hydrogen Evolution Reaction

Machine Learning Prediction for Bandgaps of Inorganic Materials

Lang Wu, Yue Xiao, Mithun Ghosh, Qiang Zhou and Qing Hao

Research Paper | published online: 04 Jun 2020

ES Materials and Manufacturing, 2020, 9, 34-39
Machine Learning Prediction for Bandgaps of Inorganic Materials

Synthesis and Characterization of Robust SiO2-Phase Change Materials (PCM) Microcapsules

Jinliang An, En-Hua Yang, Fei Duan, Yong Xiang and Jinglei Yang

Research Paper | published online: 23 May 2021

ES Materials and Manufacturing, 2022, 15, 34-45
Synthesis and Characterization of Robust SiO2-Phase Change Materials (PCM) Microcapsules

Single-step Electrodeposition of CZTS Thin Film: Influence of Complexing Agent Concentration

Haribhau Borate, Ajinkya Bhorde, Bharat Gabhale, Subhash Pandharkar, Mohit Prasad,  Vidhika Sharma, Avinash Rokade and Sandesh Jadkar

Research Paper | published online: 11 Jun 2022

ES Materials and Manufacturing, 2022, 17, 34-43
Single-step Electrodeposition of CZTS Thin Film: Influence of Complexing Agent Concentration

In-situ X-ray Observation of Synthesizing Process for Rare-earth Transition-metal Pnictides under High Temperature and High Pressure

Chihiro Sekine, Hidetoshi Osanai, Keisuke Ikemori, Ryosuke Nakajima, Shingo Deminami, Jirattagan Sirimart and Hirotada Gotou

Research Paper | published online: 25 Sep 2018

ES Materials and Manufacturing, 2018, 1, 35-40
In-situ X-ray Observation of Synthesizing Process for Rare-earth Transition-metal Pnictides under High Temperature and High Pressure

Development of Nanocomposite Adsorbents for Heavy Metal Removal from Wastewater

Bin Wang, Tingting Wu, Subramania Angaiah, Vignesh Murugadoss, Jong-Eun Ryu, Evan K. Wujcik, Na Lu, David P. Young, Qiang Gao and Zhanhu Guo

Review Paper | published online: 04 Dec 2018

ES Materials and Manufacturing, 2018, 2, 35-44
Development of Nanocomposite Adsorbents for Heavy Metal Removal from Wastewater

Study on Design, Synthesis and Controlled Color Emission of (Gd,Y)AG:Ce3+ Based Phosphors Through Replacing Al3+ Partly

Shiyu Ma, Bin Liu, Jinkai Li, Bingqiang Cao, Yizhong Lu and Zongming Liu

Research Paper | published online: 15 Oct 2020

ES Materials and Manufacturing, 2021, 12, 35-42
Study on Design, Synthesis and Controlled Color Emission of (Gd,Y)AG:Ce3+ Based Phosphors Through Replacing Al3+ Partly

Investigation of Compatibility of Fluorine-Acrylic Emulsion and Sulphoaluminate Cement in the Design of Composite Coating: Effects of Sorbitol and Its Mechanism

Chen Liang, Piqi Zhao, Pengkun Hou, Shoude Wang, Valeria Strokova, Lingchao Lu and Xin Cheng

Research Paper | published online: 25 May 2020

ES Materials and Manufacturing, 2020, 8, 36-45
Investigation of Compatibility of Fluorine-Acrylic Emulsion and Sulphoaluminate Cement in the Design of Composite Coating: Effects of Sorbitol and Its Mechanism

A Review on Phonon Transport within Polycrystalline Materials

Qing Hao and Jivtesh Garg

Review Paper | published online: 08 Jun 2021

ES Materials and Manufacturing, 2021, 14, 36-50
A Review on Phonon Transport within Polycrystalline Materials

The Post-treatments of Aluminum Oxynitride (AlON) Powders Synthesized by the Carbothermal Reduction and Nitriding Process

Yingying Chen, Qinggang Li, Zhi Wang, Guopu Shi, Junyan Wu and Mengyong Sun

Research Paper | published online: 04 Oct 2021

ES Materials and Manufacturing, 2022, 16, 37-45
The Post-treatments of Aluminum Oxynitride (AlON) Powders Synthesized by the Carbothermal Reduction and Nitriding Process

Structural, Morphological, Optical and Electrical Properties of Cu-Doped PbS Nanofilms

Rui Li, Wei Li, Mengting Liu, Qinyu He, Yinzhen Wang, Qiuqiang Zhan and Teng Wang

Research Paper | published online: 30 Mar 2019

ES Materials and Manufacturing, 2019, 4, 38-44
Structural, Morphological, Optical and Electrical Properties of Cu-Doped PbS Nanofilms

Solubility and Solution Thermodynamics of Tylosin in Pure Solvents and Mixed Solvents at Various Temperatures

Yanmin Shen, Wenju Liu, Zehua Bao and Zhanhu Guo

Research Paper | published online: 06 Jul 2019

ES Materials and Manufacturing, 2019, 5, 38-48
Solubility and Solution Thermodynamics of Tylosin in Pure Solvents and Mixed Solvents at Various Temperatures

Effect of A Vinyl Ester-Carbon Nanotubes Sizing Agent on Interfacial Properties of Carbon Fibers Reinforced Unsaturated Polyester Composites

Zijian Wu, Lin Li, Ning Guo, Rongchen Yang, Dawei Jiang, Mingyu Zhang, Mingyan Zhang, Yudong Huang and Zhanhu Guo

Research Paper | published online: 06 Dec 2019

ES Materials and Manufacturing, 2019, 6, 38-48
Effect of A Vinyl Ester-Carbon Nanotubes Sizing Agent on Interfacial Properties of Carbon Fibers Reinforced Unsaturated Polyester Composites

Facile Fabrication Hierarchical Pore Structure Li1.2Mn0.54Ni0.13Co0.13-xSrxO2 Nanofiber for High-Performance Cathode Materials

Yu Zhang, Xingyu Li, Tianjiao Zhu, Shulan Ma, Huifeng Li and Genban Sun

Research Paper | published online: 10 Jan 2019

ES Materials and Manufacturing, 2019, 3, 38-46
Facile Fabrication Hierarchical Pore Structure Li1.2Mn0.54Ni0.13Co0.13-xSrxO2 Nanofiber for High-Performance Cathode Materials

Nanocrystalline Copper Selenide Formation by Direct Reaction between Cu-ions and Selenosulfate

Habib M. Pathan, Balasaheb M. Palve, Sandesh R. Jadkar and Oh-Shim Joo

Research Paper | published online: 17 Oct 2020

ES Materials and Manufacturing, 2020, 10, 39-44
Nanocrystalline Copper Selenide Formation by Direct Reaction between Cu-ions and Selenosulfate

Microalgal-immobilized Biocomposite Scaffold Fabricated by Fused Deposition Modeling 3D Printing Technology for Dyes Removal 

Xinshu Xia, Xiaorong Xu, Chensheng Lin, Yujin Yang, Lingxing Zeng, Yinglian Zheng, Xinru Wu, Wei Li, Liren Xiao, Qingrong Qian and Qinghua Chen

 

Research Paper | published online: 16 Feb 2020

ES Materials and Manufacturing, 2020, 7, 40-50
Microalgal-immobilized Biocomposite Scaffold Fabricated by Fused Deposition Modeling 3D Printing Technology for Dyes Removal 

Preparation and Modification of Chitosan-Based Membrane

Miao Sun, Lincheng Yuan, Xiaobin Yang and Lu Shao

Research Paper | published online: 08 Jun 2020

ES Materials and Manufacturing, 2020, 9, 40-47
Preparation and Modification of Chitosan-Based Membrane

Physicochemical Properties and Thermoelectric Studies of Electrochemically Deposited Lead Telluride Films

Anil B. Gite, Balasaheb M. Palve, Vishwasrao B. Gaikwad, Sarika D. Shinde, Gotan H. Jain and Habib. M. Pathan

Research Paper | published online: 12 Dec 2020

ES Materials and Manufacturing, 2021, 11, 40-49
Physicochemical Properties and Thermoelectric Studies of Electrochemically Deposited Lead Telluride Films

Synthesis of Fused Pyran and Tetracyclic Pyran Rings  by Intramolecular Palladium-catalyzed β-H Elimination and  C–H  Bond Functionalization

Rathin Jana, Mitali Dewan and Gourisankar Roymahapatra

Research Paper | published online: 17 Apr 2021

ES Materials and Manufacturing, 2021, 13, 40-52
Synthesis of Fused Pyran and Tetracyclic Pyran Rings  by Intramolecular Palladium-catalyzed β-H Elimination and  C–H  Bond Functionalization

Fabrication of pH-electroactive Bacterial Cellulose/Polyaniline Hydrogel for the Development of a Controlled Drug Release System

Sixiang Li, Ashwak Jasim, Weiwei Zhao, Lina Fu, Muhammad Wajid Ullah, Zhijun Shi and Guang Yang

Research Paper | published online: 11 Oct 2018

ES Materials and Manufacturing, 2018, 1, 41-49
Fabrication of pH-electroactive Bacterial Cellulose/Polyaniline Hydrogel for the Development of a Controlled Drug Release System

Structural, Electronic, and Optical Properties of Lead-Free Halide Double Perovskite Rb2AgBiI6: A Combined Experimental and DFT Study

Ajinkya Bhorde, Ravindra Waykar, Sachin R. Rondiya, Shruthi Nair, Ganesh Lonkar, Adinath Funde, Nelson Y. Dzade and Sandesh Jadkar

Research Paper | published online: 25 Jan 2021

ES Materials and Manufacturing, 2021, 12, 43-52
Structural, Electronic, and Optical Properties of Lead-Free Halide Double Perovskite Rb2AgBiI6: A Combined Experimental and DFT Study

Study on Copolymer from Cyclic Butylene Terephthalate and Polycaprolactone by In-Situ Polymerization

Haijun Zhou, Jinling Wang, Yujie Liu, Zhengyang Chen and Jiaoxia Zhang

Research Paper | published online: 05 Oct 2021

ES Materials and Manufacturing, 2022, 17, 44-52
Study on Copolymer from Cyclic Butylene Terephthalate and Polycaprolactone by In-Situ Polymerization

Simulation for the Influence of Interface Thickness on the Dendritic Growth of Nickel- Copper Alloy by a Phase-Field Method

Yuhong Zhao, Bing Zhang, Weipeng Chen, Hong Wang, Meng Wang and Hua Hou

Research Paper | published online: 19 Oct 2018

ES Materials and Manufacturing, 2018, 2, 45-50
Simulation for the Influence of Interface Thickness on the Dendritic Growth of Nickel- Copper Alloy by a Phase-Field Method

Using Pseudo-ZTs for Thermoelectric Materials Search

Shuang Tang

Research Paper | published online: 28 Mar 2019

ES Materials and Manufacturing, 2019, 4, 45-50
Using Pseudo-ZTs for Thermoelectric Materials Search

Eosin-Y Sensitized Bi-layered ZnO Nanoflower-CeO2 Photoanode for Dye-Sensitized Solar Cells Application

Suhail A. A. R. Sayyed, Niyamat I. Beedri, Pankaj K. Bhujbal, Shoyebmohamad F. Shaikh and Habib M. Pathan

Research Paper | published online: 19 Nov 2020

ES Materials and Manufacturing, 2020, 10, 45-51
Eosin-Y Sensitized Bi-layered ZnO Nanoflower-CeO2 Photoanode for Dye-Sensitized Solar Cells Application

Influence of Mixed-solvent System and Reaction Temperature on In situ, Surfactant-free Synthesis of P3HT:SnS Nanocomposites

Yogita Chaudhari, Hemant Tarkas, Swapnil Tak, Ashvini Punde, Shruti Shah, Swati Rahane, Ashish Waghmare, Yogesh Hase, Jaydeep Sali and Sandesh Jadkar

Research Paper | published online: 12 Jun 2022

ES Materials and Manufacturing, 2022, 18, 45-55
Influence of Mixed-solvent System and Reaction Temperature on In situ, Surfactant-free Synthesis of P3HT:SnS Nanocomposites

Synthesis and Characterization of Antiflammable Vinyl Ester Resin Nanocomposites with Surface functionalized Nanotitania

Rajib Das, Sravanthi Vupputuri, Qian Hu, Yun Chen, Henry Colorado, Zhanhu Guo and Zhe Wang

Research Paper | published online: 31 May 2020

ES Materials and Manufacturing, 2020, 8, 46-53
Synthesis and Characterization of Antiflammable Vinyl Ester Resin Nanocomposites with Surface functionalized Nanotitania

High Performance Conducting Nanocomposites Polyaniline (PANI)-CuO with Enhanced Antimicrobial Activity for Biomedical Applications

Supriya Vyas, Ashutosh Shukla, Sugam J Shivhare, Vivekanand S Bagal and Navneeta Upadhyay

Research Paper | published online: 11 May 2021

ES Materials and Manufacturing, 2022, 15, 46-52
High Performance Conducting Nanocomposites Polyaniline (PANI)-CuO with Enhanced Antimicrobial Activity for Biomedical Applications

Wavelet Power and Shannon Entropy Applied to Acoustic Emission Signals for Corrosion Detection and Evaluation of Reinforced Concrete

Jinrui Zhang, Ziye Kang, Dongshuai Hou, Biqin Dong and Hongyan Ma

Research Paper | published online: 27 Oct 2021

ES Materials and Manufacturing, 2022, 16, 46-55
Wavelet Power and Shannon Entropy Applied to Acoustic Emission Signals for Corrosion Detection and Evaluation of Reinforced Concrete

Anti-Glare Coatings Based on Porous Silicon Structures

I. A. Iwe, E. A. Gosteva, V. V. Starkov, D. M. Sedlovets and O. Mong

Research Paper | published online: 09 Jan 2019

ES Materials and Manufacturing, 2019, 3, 47-51
Anti-Glare Coatings Based on Porous Silicon Structures

Polypyrrole Functionalized Graphene Oxide Accelerated Zinc Phosphate Coating Under Low-Temperature

 

Qingsong Zhu, Jingguang Liu, Xin Wang, Yuxiang Huang, Ying Ren, Weiqiang Song, Chenzhong Mu, Xianhu Liu, Fengchun Wei and Chuntai Liu

Research Paper | published online: 05 Sep 2020

ES Materials and Manufacturing, 2020, 9, 48-54
Polypyrrole Functionalized Graphene Oxide Accelerated Zinc Phosphate Coating Under Low-Temperature

 

Thickness Dependent Physical Properties of SILAR Deposited Nanostructured CoS Thin Films

A. V. Mitkari and A. U. Ubale

Research Paper | published online: 17 Jun 2019

ES Materials and Manufacturing, 2019, 5, 49-56
Thickness Dependent Physical Properties of SILAR Deposited Nanostructured CoS Thin Films

Multifunctional Lightweight Aggregate Containing Phase Change Material and Water for Damage Mitigation of Concrete

Wenyu Liao, Aditya Kumar, Kama Khayat and Hongyan Ma

Research Paper | published online: 11 Dec 2019

ES Materials and Manufacturing, 2019, 6, 49-61
Multifunctional Lightweight Aggregate Containing Phase Change Material and Water for Damage Mitigation of Concrete

Effect of Cocrystal Behavior on Sensitivity and Thermal Decomposition Mechanisms of CL-20/HMX via Molecular Dynamics Simulations

Yizheng Fu, Penghui Zhao, Luxia Yang, Ruizheng Miao, Congyun Zhang, Zhanhu Guo and Yaqing Liu

Research Paper | published online: 13 Oct 2018

ES Materials and Manufacturing, 2018, 1, 50-56
Effect of Cocrystal Behavior on Sensitivity and Thermal Decomposition Mechanisms of CL-20/HMX via Molecular Dynamics Simulations

Structural, Optoelectronic, and Photoelectrochemical Investigation of CdSe Nanocrystals Prepared by Hot Injection Method

Sunil V. Barma, Sachin R. Rondiya, Yogesh A. Jadhav, Sagar B. Jathar, Ganesh K. Rahane, Avinash Rokade, Russell W. Cross, Mamta P. Nasane, Vijaya Jadkar, Nelson Y. Dzade and Sandesh R. Jadkar

Research Paper | published online: 12 Dec 2020

ES Materials and Manufacturing, 2021, 11, 50-56
Structural, Optoelectronic, and Photoelectrochemical Investigation of CdSe Nanocrystals Prepared by Hot Injection Method

Hydration Properties of Cement Pastes with Al-Zinc Oxide and Zinc Oxide Nanoparticles

SeyedAli Ghahari,Ehsan Ghafari, Pengkun Hou and Na Lu

Research Paper | published online: 30 Nov 2018

ES Materials and Manufacturing, 2018, 2, 51-59
Hydration Properties of Cement Pastes with Al-Zinc Oxide and Zinc Oxide Nanoparticles

Improvement in Recycling Times and Photodegradation Efficiency of Core-Shell Structured Fe3O4@C-TiO2 Composites by pH Adjustment

Baolai Wang, Kaili Wei, Xi Mo, Jiamin Hu, Guannan He, Yinzhen Wang, Wei Li and Qinyu He

Research Paper | published online: 06 Apr 2019

ES Materials and Manufacturing, 2019, 4, 51-57
Improvement in Recycling Times and Photodegradation Efficiency of Core-Shell Structured Fe3O4@C-TiO2 Composites by pH Adjustment

Mechanical and Conductive Properties of Smart Cementitious Composites with Conductive Rubber Crumbs

Wenkui Dong, Wengui Li, Kirk Vessalas and Kejin Wang

Research Paper | published online: 16 Feb 2020

ES Materials and Manufacturing, 2020, 7, 51-63
Mechanical and Conductive Properties of Smart Cementitious Composites with Conductive Rubber Crumbs

Synthesis of 9, 10-Dihydrophenanthrene, Phenanthrene, Mono- and Dialkyl Phenanthrene and Octa-hydro Phenanthrene by Palladium-catalyzed Heck Reactions

Rathin Jana, Mitali Dewan and Gourisankar Roymahapatra

Research Paper | published online: 06 Jun 2021

ES Materials and Manufacturing, 2021, 14, 51-58
Synthesis of 9, 10-Dihydrophenanthrene, Phenanthrene, Mono- and Dialkyl Phenanthrene and Octa-hydro Phenanthrene by Palladium-catalyzed Heck Reactions

Strong Quantum Confined Lead Sulphide Quantum Dots using Ionic Reaction and Their Properties

Vikram P. Bhalekar and Habib M. Pathan

Research Paper | published online: 03 Mar 2019

ES Materials and Manufacturing, 2019, 3, 52-56
Strong Quantum Confined Lead Sulphide Quantum Dots using Ionic Reaction and Their Properties

Effect of Phosphine Gas Conditions on Structural, Optical and Electrical Properties of Nc-Si:H Films Deposited by Cat-CVD Method

Bharat Gabhale, Haribhau Borate, Subhash Pandharkar, Ajinkya Bhorde, Rahul Aher, Shruthi Nair,Priti Vairale, Ashvini Punde, Ashish Waghmare, Vijaya Jadkar, Vidya Doiphode, Yogesh Hase, Nilesh Patil, Sachin Rondiya, Pratibha Shinde, Mohit Prasad and Sandesh Jadkar

Research Paper | published online: 22 Nov 2020

ES Materials and Manufacturing, 2020, 10, 52-59
Effect of Phosphine Gas Conditions on Structural, Optical and Electrical Properties of Nc-Si:H Films Deposited by Cat-CVD Method

Degradation of Hazardous Organics via Cathodic Flow-through Process Using a Spinel FeCo2O4/CNT Decorated Stainless-Steel Mesh

Tianzhu Fan, Wei Deng, Yang Gang, Zichen Du and Ying Li

Research Paper | published online: 02 Feb 2021

ES Materials and Manufacturing, 2021, 12, 53-62
Degradation of Hazardous Organics via Cathodic Flow-through Process Using a Spinel FeCo2O4/CNT Decorated Stainless-Steel Mesh

The Contribution of Conductive Network Conversion in Thermal Conductivity Enhancement of Polymer Composite: A Theoretical and Experimental Study

Jingyao Sun, Xiaowen Zhang, Qingyuan Du, Vignesh Murugadoss, Daming Wu and Zhanhu Guo

Research Paper | published online: 10 Apr 2021

ES Materials and Manufacturing, 2021, 13, 53-65
The Contribution of Conductive Network Conversion in Thermal Conductivity Enhancement of Polymer Composite: A Theoretical and Experimental Study

Flexible Ethylene-vinyl Acetate Copolymer/Fluorographene Composite Films with Excellent Thermal Conductive and Electrical Insulation Properties for Thermal Management

He Han, Haoyang Sun, Fan Lei, Jintao Huang, Sha Lyu, Bangyao Wu, Meng Yang, Chentao Zhang, Dandan Li, Zhi Zhang and Dazhi Sun

Research Paper | published online: 09 Sep 2021

ES Materials and Manufacturing, 2022, 15, 53-64
Flexible Ethylene-vinyl Acetate Copolymer/Fluorographene Composite Films with Excellent Thermal Conductive and Electrical Insulation Properties for Thermal Management

Hierarchical Ultrathin Nanosheet of Ni(OH)2/rGO Composite Chemically Deposited on Ni Foam for NOx Gas Sensors

P. E. Lokhande, Vishal Kadam, Chaitali Jagatap, U. S. Chavan,  R. Udayabhaskar and H. M. Pathan

Research Paper | published online: 11 Jun 2022

ES Materials and Manufacturing, 2022, 17, 53-56
Hierarchical Ultrathin Nanosheet of Ni(OH)2/rGO Composite Chemically Deposited on Ni Foam for NOx Gas Sensors

Polyaniline Doped with Protonic Acids: Optical and Morphological Studies

Ravi V. Ingle, Shoaib F. Shaikh, Pankaj K. Bhujbal, Habib M. Pathan and Vilas A. Tabhane

Research Paper | published online: 08 Jun 2020

ES Materials and Manufacturing, 2020, 8, 54-59
Polyaniline Doped with Protonic Acids: Optical and Morphological Studies

Correction: Sustainable Cross-linked Porous Corn Starch Adsorbents with High Methyl Violet Adsorption

Huige Wei; Junhui Ma; Yapeng Shi; Dapeng Cui; Mingzhu Liu; Na Lu; Ning Wang; Tingting Wu; Evan Wujcik and Zhanhu Guo

Correction | published online: 08 Jul 2020

ES Materials and Manufacturing, 2020, 9, 55
Correction: Sustainable Cross-linked Porous Corn Starch Adsorbents with High Methyl Violet Adsorption

Highly Efficient Synthesis of Hexagonal Boron Nitride Nanofibers with High Specific Surface Area

Hongshou Liu, Zhaoqian Yan, Zhihao Sun, Anran Li, Zihao Guo and Lei Qian

Research Paper | published online: 02 Nov 2021

ES Materials and Manufacturing, 2022, 16, 56-65
Highly Efficient Synthesis of Hexagonal Boron Nitride Nanofibers with High Specific Surface Area

Preparation and Response Characteristics of Acoustic Emission Sensors with Different Matching Layers

Mei Cao, Dandan Sun, Haoran Li, Deli Lou, Fan Yang, Peng Du, Dongyu Xu and Shoude Wang

Research Paper | published online: 12 Jun 2022

ES Materials and Manufacturing, 2022, 18, 56-65
Preparation and Response Characteristics of Acoustic Emission Sensors with Different Matching Layers

Novel Superhydrophobic Cement-based Materials Achieved by Construction of Hierarchical Surface Structure with FAS/SiO2 Hybrid Nanocomposites

Pengkun Hou, Ran Li, Qinfei Li, Na Lu, Kejin Wang, Mingle Liu, Xin Cheng and Surendra Shah

Cover Page Article | published online: 13 Oct 2018

ES Materials and Manufacturing, 2018, 1, 57-66
Novel Superhydrophobic Cement-based Materials Achieved by Construction of Hierarchical Surface Structure with FAS/SiO2 Hybrid Nanocomposites

Excellent Response and Recovery Time of Photo-Detectors Based on Nc-Si:H Films Grown by Using Hot Wire Method

Vijaya Jadkar, Amit Pawbake, Ashok Jadhavar, Ravindra Waykar, Subhash Pandharkar, Ajinkya Bhorde, Rahul Aher, Shruthi Nair, Bharat Gabhale, Ashish Waghmare, Dhirsing Naik, Priti Vairale, Suresh Gosavi and Sandesh Jadkar

Research Paper | published online: 06 Sep 2019

ES Materials and Manufacturing, 2019, 5, 57-64
Excellent Response and Recovery Time of Photo-Detectors Based on Nc-Si:H Films Grown by Using Hot Wire Method

Improved Bonding Strength Between Thermoplastic Resin and Ti Alloy with Surface Treatments by Multi-step Anodization and Single-step Micro-arc Oxidation Method: A Comparative Study

Logesh Shanmugam, Mohammad Erfan Kazemi and Jinglei Yang

Research Paper | published online: 02 Feb 2019

ES Materials and Manufacturing, 2019, 3, 57-65
Improved Bonding Strength Between Thermoplastic Resin and Ti Alloy with Surface Treatments by Multi-step Anodization and Single-step Micro-arc Oxidation Method: A Comparative Study

Photoelectrochemical Investigation on the Cadmium Sulfide (CdS) Thin Films Prepared using Spin Coating Technique

Ganesh K. Rahane, Sagar B. Jathar, Sachin R. Rondiya, Yogesh A. Jadhav, Sunil V. Barma, Avinash Rokade, Russell W. Cross, Mamta P. Nasane, Vijaya Jadkar, Nelson Y. Dzade and Sandesh R. Jadkar

Research Paper | published online: 23 Dec 2020

ES Materials and Manufacturing, 2021, 11, 57-64
Photoelectrochemical Investigation on the Cadmium Sulfide (CdS) Thin Films Prepared using Spin Coating Technique

Optimized Active Cooling and Refrigeration using Antidoted Graphene for Heat Management of Microelectronics

Shuang Tang, Andy Juan, David Drysdale, Joseph Duarte Menjivar and Jason Guzman

Research Paper | published online: 07 Mar 2022

ES Materials and Manufacturing, 2022, 17, 57-62
Optimized Active Cooling and Refrigeration using Antidoted Graphene for Heat Management of Microelectronics

Excellent Gas Barrier Properties PET Film Modified by Silicone Resin/Sericite Nanocomposite Coatings

Yifan Chen, Lei Ding, Bo Jiang, Li Liu, Yunzhe Du and Yudong Huang

Research Paper | published online: 18 Apr 2019

ES Materials and Manufacturing, 2019, 4, 58-65
Excellent Gas Barrier Properties PET Film Modified by Silicone Resin/Sericite Nanocomposite Coatings

Tribological Investigation of Self-Healing Composites Containing Metal/Polymer Microcapsules

Dawei Sun, Jianhua Yan, Xiaoyu Ma, Mingzhang Lan, Ziming Wang, Suping Cui and Jinglei Yang

Research Paper | published online: 12 May 2021

ES Materials and Manufacturing, 2021, 14, 59-72
Tribological Investigation of Self-Healing Composites Containing Metal/Polymer Microcapsules

Possible Evidence of a Point of Discontinuity (T*) on the Arrhenius Relationship for the Ba0.5Sr0.5Co1-xFexO3-δ Solid Solutions: A Non-Conventional Analysis

Edoardo Magnone, Grazia Accardo and Paolo Mele

Research Paper | published online: 11 Dec 2018

ES Materials and Manufacturing, 2018, 2, 60-66
Possible Evidence of a Point of Discontinuity (T*) on the Arrhenius Relationship for the Ba0.5Sr0.5Co1-xFexO3-δ Solid Solutions: A Non-Conventional Analysis

Preparation and Damping Properties of Al2O3 Hollow Spheres/Epoxy Composites Encapsulating Q195 Steel Pipes

Yang Zhang and Li Zhan

Research Paper | published online: 19 Oct 2020

ES Materials and Manufacturing, 2020, 10, 60-66
Preparation and Damping Properties of Al2O3 Hollow Spheres/Epoxy Composites Encapsulating Q195 Steel Pipes

Temperature-dependent Optical Characterization of VO2 Thin Film Prepared from Furnace Oxidation Method

Sydney Taylor, Jeremy Chao, Linshuang Long, Niko Vlastos and Liping Wang

Research Paper | published online: 17 Dec 2019

ES Materials and Manufacturing, 2019, 6, 62-67
Temperature-dependent Optical Characterization of VO2 Thin Film Prepared from Furnace Oxidation Method

Graphene Oxide Assisted Synthesis of Magnesium Oxide Nanorods

Prashant. M. Kakade, Avinash. R. Kachere, Nandkumar. T. Mandlik, Sachin R. Rondiya, Sandesh R. Jadkar and Shivaji. V. Bhosale

Research Paper | published online: 08 Jan 2021

ES Materials and Manufacturing, 2021, 12, 63-71
Graphene Oxide Assisted Synthesis of Magnesium Oxide Nanorods

Selective Color Metamaterial Absorber Made of Aluminum Nanodisk Arrays by Excitation of Magnetic Polaritons

Hassan Alshehri, Sydney Taylor, Siying Liu, Yongming Liu, Robert Wang and Liping Wang

Research Paper | published online: 15 Jan 2022

ES Materials and Manufacturing, 2022, 17, 63-72
Selective Color Metamaterial Absorber Made of Aluminum Nanodisk Arrays by Excitation of Magnetic Polaritons

A Facile Synthesis of Ag/TiO2/rGO Nanocomposites with Enhanced Visible Light Photocatalytic Activity

Meiyan Yu, Teng Yu, Shougang Chen, Zhanhu Guo and Ilwoo Seok

Research Paper | published online: 01 Mar 2020

ES Materials and Manufacturing, 2020, 7, 64-69
A Facile Synthesis of Ag/TiO2/rGO Nanocomposites with Enhanced Visible Light Photocatalytic Activity

Thermal Characterization of Convective Heat Transfer in Microwires Based on Modified Steady State “Hot Wire” Method

Xiaoman Wang, Rulei Guo, Qinping Jian, Guilong Peng, Yanan Yue and Nuo Yang

Research Paper | published online: 16 Sep 2019

ES Materials and Manufacturing, 2019, 5, 65-71
Thermal Characterization of Convective Heat Transfer in Microwires Based on Modified Steady State “Hot Wire” Method

Effect of Different Ag Content on the Structural and Mechanical Properties of Sn15Bi Solder

 Yu Ding, Fengjiang Wang,Yulin Li and Kaipeng Wang 

Research Paper | published online: 06 Jan 2021

ES Materials and Manufacturing, 2021, 11, 65-71
Effect of Different Ag Content on the Structural and Mechanical Properties of Sn15Bi Solder

Effect of Different Sintering Additives on the Microstructure, Phase Compositions and Mechanical Properties of Si3N4/SiC Ceramics

Hailing Yang, Qinggang Li, Zhi Wang, Hao Wu, Yuying Wu and Xin Cheng

Research Paper | published online: 26 Jun 2021

ES Materials and Manufacturing, 2022, 15, 65-71
Effect of Different Sintering Additives on the Microstructure, Phase Compositions and Mechanical Properties of Si3N4/SiC Ceramics

Effect of PLA Crystallization on the Thermal Conductivity and Breakdown Strength of PLA/BN Composites

Lu Bai, Shaodi Zheng, Ruiying Bao, Zhengying Liu, Mingbo Yang and Wei Yang

Research Paper | published online: 29 Dec 2018

ES Materials and Manufacturing, 2019, 3, 66-72
Effect of PLA Crystallization on the Thermal Conductivity and Breakdown Strength of PLA/BN Composites

Improved Synthesis of Perovskite CsPbX3@SiO2 (X = Cl, Br, and I) Quantum Dots with Enhanced Stability and Excellent Optical Properties

Wenzhi Wang, Jinkai Li, Pengjuan Ni, Bin Liu, Qi Chen, Yizhong Lu, Hao Wu, Bingqiang Cao and Zongming Liu

Research Paper | published online: 04 Apr 2019

ES Materials and Manufacturing, 2019, 4, 66-73
Improved Synthesis of Perovskite CsPbX3@SiO2 (X = Cl, Br, and I) Quantum Dots with Enhanced Stability and Excellent Optical Properties

A Sustainable Synthesis of Nickel-Nitrogen-Carbon Catalysts for Efficient Electrochemical CO2 Reduction to CO

John Pellessier, Yang Gang and Ying Li

Research Paper | published online: 30 Mar 2021

ES Materials and Manufacturing, 2021, 13, 66-75
A Sustainable Synthesis of Nickel-Nitrogen-Carbon Catalysts for Efficient Electrochemical CO2 Reduction to CO

Improving the Thermoelectric Properties of 2,7-Dioctyl[1]Benzothieno[3,2-b][1]Benzothiophene-based Organic Semiconductors by Isotropic Strain

Ziman Wang, Ming Yang, Qinglong Jiang, Kun Zheng, Yongmei Ma and Hang Zhang

Research Paper | published online: 29 Jun 2021

ES Materials and Manufacturing, 2022, 16, 66-77
Improving the Thermoelectric Properties of 2,7-Dioctyl[1]Benzothieno[3,2-b][1]Benzothiophene-based Organic Semiconductors by Isotropic Strain

Effect of Cu4SnS4 Layer Thickness on the Photovoltaic Parameters of Photoelectrochemical Solar Cells

H. D. Shelke, A. A. Mohite, A. P. Torane, K. V. Madhale and C. D. Lokhande

Research Paper | published online: 12 Jun 2022

ES Materials and Manufacturing, 2022, 18, 66-76
Effect of Cu4SnS4 Layer Thickness on the Photovoltaic Parameters of Photoelectrochemical Solar Cells

Enhanced Electrochemical Performance of Cu2+ doped TiO2 Nanoparticles for Lithium-ion Battery

Xiao-Chong Zhao, Pan Yang, Li-Jun Yang, Yu Cheng, Hui-Yuan Chen, Hu Liu, Gang Wang, Vignesh Murugadoss, Subramania Angaiah and Zhanhu Guo

Research Paper | published online: 08 Oct 2018

ES Materials and Manufacturing, 2018, 1, 67-71
Enhanced Electrochemical Performance of Cu2+ doped TiO2 Nanoparticles for Lithium-ion Battery

Deposition of TiO2 and Au: TiO2 Film and Their Photoelectrochemical Properties

Farhana Parveen, Chaitali V. Jagtap, Ravi V. Ingle, Niyamat I. Beedri and Basavaraja Sannakki

Research Paper | published online: 02 Dec 2020

ES Materials and Manufacturing, 2020, 10, 67-71
Deposition of TiO2 and Au: TiO2 Film and Their Photoelectrochemical Properties

Amino Carbon Nanotube Modified Reduced Graphene Oxide Aerogel for Oil/Water Separation

Jingyi Cai, Jing Tian, Hongbo Gu and Zhanhu Guo

Research Paper | published online: 18 Dec 2019

ES Materials and Manufacturing, 2019, 6, 68-74
Amino Carbon Nanotube Modified Reduced Graphene Oxide Aerogel for Oil/Water Separation

An Efficient Polyvinylidene Fluoride (PVDF) Nanogenerator for Energy Harvesting in Low Frequency Range

Ehsan Ghafari, Tommy Nantung and Na Lu

Research Paper | published online: 21 Sep 2019

ES Materials and Manufacturing, 2019, 5, 72-77
An Efficient Polyvinylidene Fluoride (PVDF) Nanogenerator for Energy Harvesting in Low Frequency Range

Correction: Recent Advances in Thermal Interface Materials

Yongcun Zhou, Siqi Wu, Pengli Zhu, Feixiang Wu, Feng Liu, Vignesh Murugadoss,  Williams Winchester, Amit Nautiyal, Zhe Wang and Zhanhu Guo

Correction | published online: 19 Nov 2020

ES Materials and Manufacturing, 2020, 10, 72-73

Achieving High Value Utilization of Bio-oil from Lignin Targeting for Advanced Lubrication

Liwen Mu, Yuguo Dong,  Licheng Li, Xiaoli Gu and Yijun Shi

Research Paper | published online: 16 Jan 2021

ES Materials and Manufacturing, 2021, 11, 72-80
Achieving High Value Utilization of Bio-oil from Lignin Targeting for Advanced Lubrication

Facile Method for Synthesis of CsPbBr3 Perovskite at Room Temperature for Solar Cell Applications

Sagar B. Jathar, Sachin R. Rondiya, Bharat R. Bade, Mamta P. Nasane, Sunil V. Barma, Yogesh A. Jadhav, Avinash V. Rokade, Kiran B. Kore, Dhanaraj S. Nilegave, Pramod U. Tandale, Sandesh R. Jadkar and Adinath M. Funde

Research Paper | published online: 21 Jan 2021

ES Materials and Manufacturing, 2021, 12, 72-77
Facile Method for Synthesis of CsPbBr3 Perovskite at Room Temperature for Solar Cell Applications

One-step Coassembled Nanocoatings on Paper for Potential Packaging Applications

Sonia E. Chavez, Hao Ding, Brandon L. Williams, Sunghyun Nam, Zaili Hou, Dongqiao Zhang and Luyi Sun

Research Paper | published online: 13 Aug 2021

ES Materials and Manufacturing, 2022, 15, 72-77
One-step Coassembled Nanocoatings on Paper for Potential Packaging Applications

Effect of Calcination Temperature on Photoluminescence Intensity of Sol-Gel prepared Sr2CeO4: Eu3+ Nano Phosphor

Paleena Thulimilli

Research Paper | published online: 22 Feb 2021

ES Materials and Manufacturing, 2021, 14, 73-78
Effect of Calcination Temperature on Photoluminescence Intensity of Sol-Gel prepared Sr2CeO4: Eu3+ Nano Phosphor

Toward Flexible Piezoelectrets with High Environmental Stability: A Hybrid Approach

Zhe Liu, Min Zeng, Hui Wang, Xiaolin Wang, Yan Li and Changchun Zeng

Research Paper | published online: 15 Jan 2022

ES Materials and Manufacturing, 2022, 17, 73-82
Toward Flexible Piezoelectrets with High Environmental Stability: A Hybrid Approach

Approaches for Increasing the β-phase Concentration of Electrospun Polyvinylidene Fluoride (PVDF) Nanofibers

Guangshuai Han, Yenfang Su, Yining Feng and Na Lu

Research Paper | published online: 18 Dec 2019

ES Materials and Manufacturing, 2019, 6, 75-80
Approaches for Increasing the β-phase Concentration of Electrospun Polyvinylidene Fluoride (PVDF) Nanofibers

Field Emission Characteristics of Double Walled TiO2 Nanotubes

Girish P. Patil, Sachin R. Rondiya, Vivekanand S. Bagal, Sugam Shivhare, Russell W. Cross, Nelson Y. Dzade, Sandesh R. Jadkar and Padmakar. G. Chavan

Research Paper | published online: 18 Jan 2021

ES Materials and Manufacturing, 2021, 13, 76-81
Field Emission Characteristics of Double Walled TiO2 Nanotubes

Microstructures and Mechanical Properties of Titanium Silicon Carbon/Alumina and Titanium Silicon Carbon-Titanium Carbide/Alumina Composite Ceramics by Modifying Alumina Content Via In-situ Synthesized

Yulin Wei, Jun Ji, Hailing Yang, Sique Chen, Yingying Chen, Deli Ma, Zhenyu Zhang, Baocai Pan and Guopu Shi

Research Paper | published online: 09 Jul 2022

ES Materials and Manufacturing, 2022, 18, 77-83
Microstructures and Mechanical Properties of Titanium Silicon Carbon/Alumina and Titanium Silicon Carbon-Titanium Carbide/Alumina Composite Ceramics by Modifying Alumina Content Via In-situ Synthesized

Spatial Damage Characterization in Self-Sensing Materials via Neural Network-Aided Electrical Impedance Tomography: A Computational Study

Lang Zhao, Tyler Tallman and Guang Lin 

Research Paper | published online: 25 Sep 2020

ES Materials and Manufacturing, 2021, 12, 78-88
Spatial Damage Characterization in Self-Sensing Materials via Neural Network-Aided Electrical Impedance Tomography: A Computational Study

Nickel Dendritic Pattern in Electrodeposition at Different Temperatures

Yusuf Hanif Shaikh, J. M. Pathan, Abdul Jallel and A. R. Khan

Research Paper | published online: 03 May 2021

ES Materials and Manufacturing, 2022, 15, 78-84
Nickel Dendritic Pattern in Electrodeposition at Different Temperatures

Synthesis of Titania/Silica Nanocomposite for Enhanced Photodegradation of Methylene Blue and Methyl Orange Dyes under UV and Mercury Lights

Ruchi Nandanwar, Jyoti Bamne, Nitu Singh, P. K. Sharma, Purnima Singh, Ahmad Umar and Fozia Z. Haque

Research Paper | published online: 15 Jan 2022

ES Materials and Manufacturing, 2022, 16, 78-88
Synthesis of Titania/Silica Nanocomposite for Enhanced Photodegradation of Methylene Blue and Methyl Orange Dyes under UV and Mercury Lights

Steel Mesh Reinforced Ni(OH)2 Nanosheets with Enhanced Oxygen Evolution Reaction Performance

Jin Liang, Haiqi Shen and Jie Kong

Research Paper | published online: 16 Apr 2021

ES Materials and Manufacturing, 2021, 14, 79-86
Steel Mesh Reinforced Ni(OH)2 Nanosheets with Enhanced Oxygen Evolution Reaction Performance

First-principle Study and Experiment on Temperature-dependent Substitution Process of Si in Ti3(Si,Al)C2 Solid Solution

Jun Ji, Liu Zhang, Zhenyu Zhang, Qinggang Li, Guopu Shi, Junyan Wu, Dechun Li and Zhi Wang

Research Paper | published online: 18 Mar 2021

ES Materials and Manufacturing, 2021, 13, 82-88
First-principle Study and Experiment on Temperature-dependent Substitution Process of Si in Ti3(Si,Al)C2 Solid Solution

Effects of Nano-Barium Sulfate on the Properties of Polybutylece Terephthalate/Polyethylene Terephthalate Composites

Beibei Li, Ling liu, Xuanlun Wang, Yong Ma, Duo Pan, Srihari Maganti, Benbin Xu and Zhanhu Guo

Research Paper | published online: 20 Jan 2022

ES Materials and Manufacturing, 2022, 17, 83-91
Effects of Nano-Barium Sulfate on the Properties of Polybutylece Terephthalate/Polyethylene Terephthalate Composites

Effect of Boron Doping on Structural, Optical, and Electrical properties of Hydrogenated Nanocrystalline Silicon Thin Films Grown by the Catalytic Chemical Vapour Deposition (Cat-CVD)  Method

Bharat Gabhale, Haribhau Borate, Ajinkya Bhorde, Subhash Pandharkar, Ashvini Punde, Yogesh Hase, Shruti Shah, Ashish Waghmare, Bharat Bade, Mohit Prasad, Avinash Rokade and Sandesh Jadkar

Research Paper | published online: 12 Jun 2022

ES Materials and Manufacturing, 2022, 18, 84-91
Effect of Boron Doping on Structural, Optical, and Electrical properties of Hydrogenated Nanocrystalline Silicon Thin Films Grown by the Catalytic Chemical Vapour Deposition (Cat-CVD)  Method

Dependence of Al Doping on the in-Situ Reactive Preparation and Mechanical Properties of Ti3SiC2/Al2O3 Composites

Xuye Wang, Fangfang Qi, Zhi Wang, Zhenyu Zhang, Qinggang Li, Junyan Wu and Guopu Shi

Research Paper | published online: 09 May 2021

ES Materials and Manufacturing, 2022, 15, 85-95
Dependence of Al Doping on the in-Situ Reactive Preparation and Mechanical Properties of Ti3SiC2/Al2O3 Composites

The Weighted Values of Solar Evaporation’s Environment Factors Obtained by Machine Learning

Yunpeng Wang, Guilong Peng, Swellam W. Sharshir, AbdAllah W. Kandeal and Nuo Yang 

Research Paper | published online: 16 Mar 2021

ES Materials and Manufacturing, 2021, 14, 87-94
The Weighted Values of Solar Evaporation’s Environment Factors Obtained by Machine Learning

Preparation of Selenium-rich Tea Set and Its Release Properties of Selenium in Water

Mingyu Di, Xiang Chen, Xiaoting Zhang, Ye Liu, Ilwoo Seok, Vignesh Murugadoss, Zhanhu Guo, Henry Colorado, Li Meng, Dejian Tang and Bin Cui

Research Paper | published online: 13 Mar 2021

ES Materials and Manufacturing, 2021, 13, 89-96
Preparation of Selenium-rich Tea Set and Its Release Properties of Selenium in Water

The Effect of Zirconium and Yttrium Oxide on the Microstructure and Mechanical Properties of Ti-Si-Zr Based Composites

Vitus Mwinteribo Tabie, Xiao-jing Xu, Li jian Wei and Xiaodong Shi

Research Paper | published online: 14 Oct 2021

ES Materials and Manufacturing, 2022, 16, 89-96
The Effect of Zirconium and Yttrium Oxide on the Microstructure and Mechanical Properties of Ti-Si-Zr Based Composites

Physico-chemical Characteristics of Amino Acids in Aqueous Solution of Amikacin Sulphate

Poonam Chaudhary, Suvarcha Chauhan, Vivek Sharma, Kuldeep Singh and Ahmad Umar

Research Paper | published online: 03 Aug 2021

ES Materials and Manufacturing, 2021, 14, 95-109
Physico-chemical Characteristics of Amino Acids in Aqueous Solution of Amikacin Sulphate

Chemical Solution Deposition of Sb2Se3 Films to Study Their Structural, Morphological and Optical Properties

Anil N. Kulkarni, Yogesh V. Marathe, Anil Pandurang Marale, Prafulla S. Patil, Sunil D. Marathe, Subhash D. Khairnar, Habib M. Pathan and Rajendra S. Patil

Research Paper | published online: 17 Jul 2021

ES Materials and Manufacturing, 2022, 15, 96-102
Chemical Solution Deposition of Sb2Se3 Films to Study Their Structural, Morphological and Optical Properties

Densification Behavior and Microstructure Evolution of Mo Manocrystals by Microwave Sintering

Ruihu Wang, Shilei Li, Peng Hu, Shuqun Chen and Jinshu Wang

Research Paper | published online: 12 Mar 2021

ES Materials and Manufacturing, 2021, 13, 97-105
Densification Behavior and Microstructure Evolution of Mo Manocrystals by Microwave Sintering

Reduced Graphene Oxide Based Electrochemical Nonenzymatic Human Serum Glucose Sensor

Medha Gijare,  Sharmila Chaudhari,  Satish Ekar and Anil Garje

Research Paper | published online: 25 Jun 2021

ES Materials and Manufacturing, 2021, 14, 110-119
Reduced Graphene Oxide Based Electrochemical Nonenzymatic Human Serum Glucose Sensor

2 Items

Development of Light Pipes via Vat Photopolymerization for Advanced Optical Applications

Murad Ali, Oleg Shiryayev, Yap Fook Fah, Nader Vahdati and Haider Butt

Research Paper | published online: 07 Nov 2024

ES Materials and Manufacturing, 2024, 26, 1304
Development of Light Pipes via Vat Photopolymerization for Advanced Optical Applications

Adsorption Kinetics of Anthocyanin Dye from Thai Dark Purple Glutinous Rice (Oryza sativa L.) on Silk Yarn
 

Thamonwan Meephun, Natthaphong Naksithong, Pattarapond Gonil, Warayuth Sajomsang, John B Bremner and Montra Chairat

Research Paper | published online: 20 Feb 2025

ES Materials and Manufacturing, 2025, 27, 1418
Adsorption Kinetics of Anthocyanin Dye from Thai Dark Purple Glutinous Rice (Oryza sativa L.) on Silk Yarn
 

10 Items

Fabrication of pH-electroactive Bacterial Cellulose/Polyaniline Hydrogel for the Development of a Controlled Drug Release System

Sixiang Li, Ashwak Jasim, Weiwei Zhao, Lina Fu, Muhammad Wajid Ullah, Zhijun Shi and Guang Yang

Research Paper | published online: 11 Oct 2018

ES Materials and Manufacturing, 2018, 1, 41-49
Fabrication of pH-electroactive Bacterial Cellulose/Polyaniline Hydrogel for the Development of a Controlled Drug Release System

Efficient Solvent-Free Microwave Irradiation Synthesis of Highly Conductive Polypropylene Nanocomposites with Lowly Loaded Carbon Nanotubes

Xingru Yan, Jingjing Liu, Mojammel Alam Khan, Stephen Sheriff, Sravanthi Vupputuri, Rajib Das, Luyi Sun, David P. Young and Zhanhu Guo

Research Paper | published online: 08 Jul 2020

ES Materials and Manufacturing, 2020, 9, 21-33
Efficient Solvent-Free Microwave Irradiation Synthesis of Highly Conductive Polypropylene Nanocomposites with Lowly Loaded Carbon Nanotubes

Research Progress on Catalytic Pyrolysis and Reuse of Waste Plastics and Petroleum Sludge

Duo Pan, Fengmei Su, Hu Liu, Chuntai Liu, Ahmad Umar, L. Castañeda, Hassan Algadi, Caiyun Wang and Zhanhu Guo

Review Paper | published online: 31 Jan 2021

ES Materials and Manufacturing, 2021, 11, 3-15
Research Progress on Catalytic Pyrolysis and Reuse of Waste Plastics and Petroleum Sludge

Recent Advances in Thermal Interface Materials

Yongcun Zhou, Siqi Wu, Yuheng Long, Pengli Zhu, Feixiang Wu, Feng Liu, Vignesh Murugadoss, Williams Winchester, Amit Nautiyal, Zhe Wang and Zhanhu Guo

 

Review Paper | published online: 08 Mar 2020

ES Materials and Manufacturing, 2020, 7, 4-24
Recent Advances in Thermal Interface Materials

Microalgal-immobilized Biocomposite Scaffold Fabricated by Fused Deposition Modeling 3D Printing Technology for Dyes Removal 

Xinshu Xia, Xiaorong Xu, Chensheng Lin, Yujin Yang, Lingxing Zeng, Yinglian Zheng, Xinru Wu, Wei Li, Liren Xiao, Qingrong Qian and Qinghua Chen

 

Research Paper | published online: 16 Feb 2020

ES Materials and Manufacturing, 2020, 7, 40-50
Microalgal-immobilized Biocomposite Scaffold Fabricated by Fused Deposition Modeling 3D Printing Technology for Dyes Removal 

Advances and Applications of Phase Change Materials (PCMs) and PCMs-based Technologies

 

Jintao Huang, Yue Luo, Mengman Weng, Jingfang Yu, Luyi Sun, Hongbo Zeng, Yidong Liu, Wei Zeng, Yonggang Min and Zhanhu Guo

Review Paper | published online: 21 Apr 2021

ES Materials and Manufacturing, 2021, 13, 23-39
Advances and Applications of Phase Change Materials (PCMs) and PCMs-based Technologies

 

Reduced Graphene Oxide Based Electrochemical Nonenzymatic Human Serum Glucose Sensor

Medha Gijare,  Sharmila Chaudhari,  Satish Ekar and Anil Garje

Research Paper | published online: 25 Jun 2021

ES Materials and Manufacturing, 2021, 14, 110-119
Reduced Graphene Oxide Based Electrochemical Nonenzymatic Human Serum Glucose Sensor

A Facile Synthesis of Ag/TiO2/rGO Nanocomposites with Enhanced Visible Light Photocatalytic Activity

Meiyan Yu, Teng Yu, Shougang Chen, Zhanhu Guo and Ilwoo Seok

Research Paper | published online: 01 Mar 2020

ES Materials and Manufacturing, 2020, 7, 64-69
A Facile Synthesis of Ag/TiO2/rGO Nanocomposites with Enhanced Visible Light Photocatalytic Activity

Polydimethylsiloxane Resin Nanocomposite Coating with Alternating Multilayer Structure for Corrosion Protection Performance

Jianping Liu, Jiaoxia Zhang, Jijun Tang, Liuyue Pu, Yanli Xue, Meiqun Lu, Lei Xu and Zhanhu Guo

Research Paper | published online: 05 Sep 2020

ES Materials and Manufacturing, 2020, 10, 29-38
Polydimethylsiloxane Resin Nanocomposite Coating with Alternating Multilayer Structure for Corrosion Protection Performance

Overview of Injection Molding Technology for Processing Polymers and Their Composites

Hongbo Fu, Hong Xu, Ying Liu, Zhaogang Yang, S. Kormakov, Daming Wu and Jingyao Sun

Review Paper | published online: 22 May 2020

ES Materials and Manufacturing, 2020, 8, 3-23
Overview of Injection Molding Technology for Processing Polymers and Their Composites

11 Items

Flexural Behavior of Reinforced Concrete Beams Incorporating Cow Bone Powder and Fly Ash: A Numerical Study Using Analysis Systems

Samir M. Ahmed, Magdy Youssef Riad Riad, Radwa Defalla Abdel Hafez and Mohamed Hamdy

Research Paper | published online: 08 Oct 2026

ES Materials and Manufacturing, , ,
Flexural Behavior of Reinforced Concrete Beams Incorporating Cow Bone Powder and Fly Ash: A Numerical Study Using Analysis Systems

Property-Driven Layer-Wise Optimization of Hybrid Composite Laminates for Impact Applications

Mahmoud Awad, Noha M. Hassan, Zied Bahroun, Rami Afif As'ad and Assil Charkoui

Research Paper | published online: 09 Oct 2026

ES Materials and Manufacturing, , ,
Property-Driven Layer-Wise Optimization of Hybrid Composite Laminates for Impact Applications

Activation Energies Calculation for Calcium Aluminate Cement Pastes with Silica Fume Additions when Subjected to High Temperatures

John F Zapata, Henry A. Colorado and Maryory A. Gómez

Research Paper | published online: 06 Oct 2026

ES Materials and Manufacturing, , ,
Activation Energies Calculation for Calcium Aluminate Cement Pastes with Silica Fume Additions when Subjected to High Temperatures

Quaternary Ammonium Salt-Based Deep Eutectic Solvents for Asphaltene Precipitation Inhibition: Colloidal Stabilization and Inhibition Mechanism

Sholpan Islam, Salimat Ryspaeva, Aigul Kerimkulova, Khadichakhan Rafikova, Irina Khisamedenova, Aidana Imanaliyeva, Esbol Shaimardan, Dinara Adikanova, Zhuldyz Zhaksybay and Tulegen Seilkhanov

Research Paper | published online: 09 Oct 2026

ES Materials and Manufacturing, , ,
Quaternary Ammonium Salt-Based Deep Eutectic Solvents for Asphaltene Precipitation Inhibition: Colloidal Stabilization and Inhibition Mechanism

Synthesis, Characterization and Flocculation Performance of a Starch-Grafted Copolymer of [(2-Methacryloyloxy)-Ethyl] Trimethyl Ammonium Chloride and N,N-Dimethyl Acrylamide Polymeric Surfactant for Wastewater Treatment

K. B. Musabekov, K. Zh. Abdiyev, B. B. Sadykov, S. M. Tazhibayeva, Zh. Toktarbay, N. K. Musabekov, G. K. Kussainova, T. M. Seilkhanov and M. T. Tursynbetov 

Research Paper | published online: 09 Oct 2026

ES Materials and Manufacturing, , ,
Synthesis, Characterization and Flocculation Performance of a Starch-Grafted Copolymer of [(2-Methacryloyloxy)-Ethyl] Trimethyl Ammonium Chloride and N,N-Dimethyl Acrylamide Polymeric Surfactant for Wastewater Treatment

Application of Analysis Software for Investigating the Behavior of Reinforced Concrete Square Short Columns Under Axial Load

Radwa Defalla Abdel Hafez, Magdy Youssef Riad Riad, Mohamed Hamdy and Samir M. Ahmed

Research Paper | published online: 12 Sep 2026

ES Materials and Manufacturing, , ,
Application of Analysis Software for Investigating the Behavior of Reinforced Concrete Square Short Columns Under Axial Load

Surface Roughness Prediction in Computer Numerical Control Turning of EN24 Steel Using Machine Learning: Influence of Cutting Speed, Depth of Cut and Tool Nose Radius

T. Satish Kumar, K. Rajesh Kannan, R. Saravanan, Jana Petrů and Kanak Kalita

Research Paper | published online: 18 Sep 2026

ES Materials and Manufacturing, , ,
Surface Roughness Prediction in Computer Numerical Control Turning of EN24 Steel Using Machine Learning: Influence of Cutting Speed, Depth of Cut and Tool Nose Radius

Seismic Response and Frequency-Dependent Amplification of the Kapchagay Earthfill Dam from Instrumental Bedrock-to-Crest Earthquake Records

Zhangazy Moldamuratov, Gulfairuz Kareken, Karlygash Ilyassova, Guldana Abyieva, Nurzhan Shanshabayev, Vladimir Lapin, Alma Tasmaganbetova and Ainur Tukhtamisheva

Research Paper | published online: 21 Sep 2026

ES Materials and Manufacturing, , ,
Seismic Response and Frequency-Dependent Amplification of the Kapchagay Earthfill Dam from Instrumental Bedrock-to-Crest Earthquake Records

Performance Evaluation of Hollow Concrete Blocks Incorporating Recycled Electronic Waste: Mechanical and Durability Behavior

Jaruwan Chiwsaree, Burachat Chatveera, Gritsada Sua-Iam, Qudeer Hussain, Adnan Nawaz and Satish Paudel

Research Paper | published online: 09 Oct 2026

ES Materials and Manufacturing, , ,
Performance Evaluation of Hollow Concrete Blocks Incorporating Recycled Electronic Waste: Mechanical and Durability Behavior

Review of the Most Promising Helium Source Areas of Kazakhstan

Moldir Mashrapova, Valeriy Vyalov, Nurbol Tileuberdi, Iskander Gussenov and Aigerim Kaidar 

Review Paper | published online: 19 Aug 2026

ES Materials and Manufacturing, , , 2483
Review of the Most Promising Helium Source Areas of Kazakhstan

Defect Detection: Traditional Approaches to Deep Learning Methods, Future Trends and Challenges

An Da, Ng Kok Why and Fang-Fang Chua

Review Paper | published online: 17 Jul 2026

ES Materials and Manufacturing, , ,
Defect Detection: Traditional Approaches to Deep Learning Methods, Future Trends and Challenges