Editor-in-Chief

Dapeng Cao, Beijing University of Chemical Technology, China

Research Area: Engineering Mathematics and Statistics; Engineering - Chemical; Engineering - Materials; Energy Systems & Energy Policies.

Yangchao Luo, University of Connecticut, USA

Research Area: Agriculture; Bioinformatics; Biology; Biomaterials; Energy Systems & Energy Policies; Food; Nutrition.

Li Shi, Tsinghua University, China

Research Area: Brain Science and Brain-computer Interface; Intelligent Control; Biological Mechanisms - Coding and Decoding Models, Brain-like algorithms; Intelligent assisted diagnosis of myocardial infarction.

David P. Young, Louisiana State University, USA

Research Area: Astronomy; Engineering - Electrical & Electronics; Geology; Materials Science and Technology; Meteorology; Physics.

Executive Editors

Qinglong Jiang, University of Arkansas at Pine Bluff, USA

Research Area: Crystal and film light-emitting; crystals and simulation; Dye sensitive solar cell; Electrochromism; Optical-electronic materials/devices and nanomaterial/nanotech; Organic/inorganic hybrid halide perovskites; Sensors, Solar cell/light-emitting; Polymer electrolytes.

Ming Liu, Harbin Institute of Technology, China

Research Area: Biomedical Systems; Bioinformatics;
Chemistry; Engineering - Chemical; Engineering - Electrical & Electronics;  Engineering - Materials; Fluid dynamics; Materials Science and Technology.

Jong Eun Ryu, North Carolina State University, USA

Research Area: Design and fabrication of actively tunable metacomposite materials; Large area manufacturing of metamaterials and integration with electronics; Multimaterial additive manufacturing.

Guang Yang, Huazhong University of Science and Technology, China

Research Area: Bioinformatics; Biology; Biomedical Systems; Ecology; Engineering - Materials; Materials Science and Technology.

Editorial Board

Antony N. Beris, University of Delaware, USA

Research Area: Engineering Mathematics and Statistics; Engineering - Chemical.

Henry A. Colorado, Universidad de Antioquia, Colombia

Research Area: Composites; Energy Systems & Energy Policies; Engineering - Construction; Engineering - Mechanical; Failure and Risk Analysis; Manufacturing; Solid mechanics.

Yuan Chen, University of Sydney, Australia

Research Area: Biomedical systems; Carbon Nanomaterial; Engineering - Chemical; Energy Systems & Policies.

Yu Chen, East China University of Science and Technology, China

Research Area: Electrical & Electronics; Energy Systems & Policies; Optoelectronics; Photovoltaics; Polymer materials; Thermoelectrics.

Mingdong Dong, Aarhus University, Denmark

Research Area: Bioinformatics; Electrical & Electronics; Metal carbides & Chalcogenides; Transistors. 

Wei Feng, Tianjin University, China

Research Area: Electrical & Electronics; Energy Systems & Energy policies; Materials Science and Technology; Photovoltaics.

Hongbo Gu, Tongji University, China

Research Area: Ecology, Materials Science and Technology; Magnetism.

Yuantong Gu, Queensland University of Technology, Australia

Research Area: Engineering Mathematics and Statistics; Engineering - Mechanical; Materials Science and Technology.

Mohammad Motaher Hossain, Texas A&M University-Kingsville, USA

Research Area: Engineering - Mechanical; Failure and Risk Analysis; Meteorology; Tribology.

Raymond Lau, Nanyang Technological University, Singapore

Research Area: Fluidization; Multiphase Flow; Reactor Design; Kinetic and hydrodynamics; Particle formulation; Simulation.

Ming Lei, Beijing University of Posts and Telecommunications, China

Research Area: Engineering-Electrical & Electronics; Engineering-Materials; Engineering- Integrated Circuit; Materials Science and Technology

Fang-Fang Li, Huazhong University of Science and Technology, China

Research Area: Carbon Materials; CO₂ reduction; Energy Systems; Materials Science and Technology.

Xiaodong (Chris) Li, University of Virginia, USA

Research Area: Additive Manufacturing/Smart Manufacturing; Biomaterials and Biomechanics; Micro /Nanomechanics; Nanomaterial-enabled Energy Systems; Surface Engineering/Tribology.

Hongfei Lin, Washington State University, USA

Research Area: Catalysis; CO₂ capture and reduction; Energy Systems & Policies.

Jiurong Liu, Shandong University, China

Research Area: Geology; Materials Science and Technology

Na Lu, Purdue University, USA

Research Area: Engineering - Civil; Optoelectronics; Thermoelectrics.

Hongmei Luo, New Mexico State University, USA

Research Area: Epitaxial thin films of metal oxides, metal nitrides, and their nanocomposites for magnetic, multiferroic, superconducting, and battery applications; quantum dots, nanomaterials for photocatalysts, electrocatalysts, and lithium-ion batteries applications.

Nithesh Naik, Manipal Institute of Technology, India

Research Area: Composite Materials; Design and Analysis; Meteorology; Mechanical Vibrations; Nano Technology.

Chul B. Park, University of Toronto, Canada

Research Area: Biodegradable foams; Environmentally safe blowing agents; Computational modelling of foaming; Fundamental understanding of foaming phenomena; Plastic foaming technology; Sound insulation foams;  Super high R value foams.

Ping Peng, Huazhong University of Science and Technology, China

Research Area: Carbon Materials; CO₂ reduction; Energy Systems; Materials Science and Technology.

Liangti Qu, Tsinghua University, China

Research Area: Electrochemistry; Energy systems; Materials Science and Technology.

Pathik Sahoo, National Institute of Materials Science, Japan.

Research Area: Algorithm-free gel computation, 3D holographic/magnetic vortex lens, Time crystal engineering in chemical reactions, Supramolecular materials, Nanostructured materials.

Ilwoo Seok, Arkansas State University, USA

Research Area: Advanced Manufacturing, Multi-functional Materials, Surface Engineering, Micro/Nano-Science, Energy and Bio-mimicry.

Wei-Heng Shih, Drexel University, USA

Research Area: Advanced manufacturing, Bioimaging; Health and Medicine, Materials, Optoelectronics; Piezoelectric biosensors.

Kelvin Kenan Song, Arizona State University, USA

Research Area: Advanced composite materials (AMCs); Advanced manufacturing; Nanostructured materials; Polymer composites - high performance in structural and functional utilization.

Yanqing Tian, Southern University of Science and Technology, China

Research Area: Conductive adhesive; Electrochromic materials and devices; Fluorescent biosensors; Materials science and engineering; Multifunctional bioimaging materials; Pressure-sensitive paint based on oxygen sensing.

Bin Wang, Engineered Multifunctional Composites (EMC) Nanotech LLC, USA

Research Area: High-performance passive dampers and base isolation bearings; Low-damage earthquake-resilient structural systems, Seismic performance of reinforced concrete structures; Seismic performance and retrofitting of non-seismically designed existing structures; Shape memory alloys (SMAs) in Earthquake Engineering.

Jianjun Wang, Institute of Chemistry, Chinese Academy of Sciences, China

Research Area: Adhesion adjustable anti-icing material construction; Adhesion between ice and material surface at low temperature, Adhesion between water and material surface at low temperature; Interfacial water phase transition and macroscopic wettability.

Jinglei Yang, Hong Kong University of Science and Technology, China

Research Area: Aerospace engineering; Composite materials science; Machine learning; Multifunctional materials; Surfaces and interfaces of materials.

Zhongzhen Yu, Beijing University of Chemical Technology, China

Research Area:  Clay; Nanocomposites; Polymers; Thermal Stability; Wear Resistance.

Hongbo Zeng, University of Alberta, Canada.

Research Area: Surface and colloid science, Intermolecular and surface forces (adhesion, friction, lubrication, etc.) in polymer materials, complex fluid, biological systems, petroleum, oil sands, and minerals.

Bing Zhang, Tianjin University, China

Research Area: Engineering - Chemical; Energy Systems and Energy Policies.

Mingqiu Zhang, Sun Yat-Sen University, China

Research Area: Polymers - blends and composites.

Jiaoxia Zhang, Jiangsu University of Science and Technology, China

Research Area:  Energy storage materials, Photocatalytic technology; Polymers and their composites.

Biao Zhao, University of Toronto, Canada

Research Area: Dielectric properties; Electrical conductivities; Electromagnetic shielding properties of inorganic-organic composites and polymer foams.

Yuhong Zhao, North University of China, China

Research Area: Advanced materials experiment, Machine learning, phase-field method, DFT, liquid forming process, Magnesium, Aluminum, Nickel, Nuclear materials.

Jiahua Zhu, University of Akron, USA

Research Area: Electrochemical energy storage and conversion; Engineering molecular interaction (H-bonding) in polymer or polymer blends for heat management; Microwave responsive hybrid catalyst design for sustainable energy production; Structural hybrid membrane for selective gas and liquid separation.

Associate Editors

Subramania Angaiah, Pondicherry University, India

Research Area: Anti-Corrosive Packaging Materials for Metals; Corrosion Inhibitors; Functional Nanocoating; IT-SOFC; Metal Matrix Nanocomposites; M-ion Batteries, New generation solar cells (DSSC, QDSSC, PSC); Supercapacitors.

Ai Du, Tongji University, China

Research Area: Super black Materials, Aerogel.

Brian J. Ewards, University of Tennessee, USA

Research Area: Molecular simulation; Nonequilibrium thermodynamics; Polymer dynamics; Rheology; Statistical mechanics.

Qing Hao, University of Arizona, USA

Research Area: Nanoscale energy transport and its applications in advanced materials and nano-electronic devices, heat transport inside Li-ion batteries, high-power electronics, boiling and condensation, thermal insulation materials, thermoelectrics, measurements, and engineering applications of graphene and other two-dimensional materials.

Jie Kong, Northwestern Polytechnical University, China

Research Area: 3D printing of electromagnetic functional materials; Design and service of wave-transparent composite materials; Design and synthesis of hyperbranched polymers; High-temperature ceramic precursor materials; Polymer conversion high-temperature absorbing material. 

Ying Li, Texas A&M University, USA

Research Area: CO₂ reduction; Electrochemical Devices for Energy Storage and Sensing; Mercury Emission Control from Coal Combustion Flue Gas; Nanomaterials synthesis and characterization; Waste water treatment and desalination.

Xiang Lu, Huazhong University of Science and Technology, China

Research Area: New methods and new theories for polymer molding and processing; Phase change composites.

Jianxi Luo, Singapore University of Technology and Design, Singapore

Research Area: Design and Artificial Intelligence, Engineering Product Development

Omid Moradi, Islamic Azad University, Iran

Research Area: Polymer Nanocomposites, Wastewater treatment, Drug delivery.

Yijun Shi, Luleå University of Technology, Sweden

Research Area: Triboelectric Nanogenerators, Advanced Lubrication, Bio-oil, Ionic Liquid/Glycerol Aqueous Solution, Photo-healing of ion gels and photo-controlled reversible adhesiveness, Friction, and wear of polymer nanocomposites.

Caiyun Wang, University of Wollongong, Australia

Research Area: CO₂ electroreduction, Conducting polymers; Electrochemical energy storage; Graphene

Bin Xu, Northumbria University, United Kingdom

Research Area: Applied mechanics, Functional materials, Micro-engineering, Sustainable and energy technology.

Xiaoyan Zhang, Chalmers University of Technology, Sweden

Research Area: Energy Conversion and storage; Nanodevices; Sensors; Two-dimensional materials.

Hang Zhang, Institute of Engineering Thermophysics, Chinese Academy of Sciences, China

Research Area: Engineering Mathematics and Statistics; Machine Intelligence & Robotics; Metamaterials; Graphene; Metal Chalcogenides; Thermoelectrics; Virtual Reality.

Ba Zhao, University of Houston, USA

Research Area: Thermal photonics and plasmonics, Photon chemical potential and light emission from nonequilibrium bodies.

For further information, please contact

Ms. Jing Yang,
Journal Co-ordinator,
Engineered Science Publisher LLC,
Gwinhurst Road Knoxville, TN 37934 USA

Email: [email protected]      

Phone: +1 8325129606