Exterior wall assemblies play a critical yet underexplored role in regulating pedestrian-level microclimate in tropical urban environments. This study presents a multi-season simulation of six ubiquitously used exterior wall systems, entailing autoclaved lightweight concrete (ALC), conventional cement block (CCB), precast concrete (PRC), red clay brick (RCB), aluminum composite panels (ACP), and timber (TBS). Thermophysical properties obtained from laboratory measurements were incorporated into ENVI-met simulations to evaluate air temperature (Ta) and mean radiant temperature (Tmrt) across five pedestrian-level locations over nine representative days spanning summer, rainy, and winter seasons. Model performance was validated against field measurements for the PRC case, showing strong agreement for Ta (R2 = 0.87) and moderate agreement for Tmrt (R2 = 0.65). Results indicate that ALC and TBS exhibit rapid thermal response with high diurnal variability, whereas CCB, PRC, and RCB function as thermal buffers that reduce amplitude and delay peak temperatures. ACP minimizes Ta through high reflectivity but increases peak Tmrt due to enhanced radiative reflection. These findings highlight a fundamental trade-off between conductive and radiative performance and demonstrate that different wall systems significantly influence outdoor thermal exposure. The study provides a validated framework and practical guidelines for climate-responsive wall systems in tropical residential construction.