This study systematically investigates the optimization of bending properties in wood-plastic composite flooring through finite element analysis. A three-dimensional model of the flooring was first constructed using SolidWorks software. Preliminary geometric parameter analysis was performed on six distinct cross-sections using AutoCAD's surface domain query, focusing on critical parameters such as cavity centroid, moment of inertia, and flexural section modulus. Initial analysis results were imported into Abaqus for static simulation, enabling comparative stress and displacement distribution analysis across cross-sections. This process identified the optimal cross-section design offering superior mechanical properties and maximum material utilization. Finally, Polyflow extrusion simulation technology was integrated to model the rheological behavior of the wood-plastic composite during extrusion, verifying the manufacturability of the structural design. Results indicate the maximum tensile stress magnitude order is: Oval holes > Round opening > Square four holes > Square porous > Hexagon hole > Round hole. Thus, circular hollow cavities exhibit the best bending performance, followed by hexagonal cavities. Additionally, circular hollow cavities demonstrate superior pressure fields, velocity fields, and shear rate fields during extrusion compared to hexagonal cavities. The proposed structural-performance screening and process simulation validation in this study provide theoretical foundations and technical pathways for the engineering application of wood-plastic composites.