P. B. Dahivade, S. G. Randive, B. Y. Fugare, V. S Sathe, A. V. Thakur and B. J. Lokhande
1 Lab of electrochemical studies, School of Physical Sciences P. A. H. Solapur University, Solapur, Maharashtra, 413255, India
2 Department of Physics, Jagadamba Mahavidyalaya, Achalpur Amravati, Maharashtra, 444806, India
Single-step electrodeposition method was employed for the deposition of innovative, nanostructured thin films of cadmium oxide at ambient temperature utilizing various solution concentrations. Deposited films ware annealed at 400 oC operating temperature for 4 hours. The prepared cadmium oxide (CdO) thin films show cubic crystal structure. The morphological investigation shows porous and granular surface morphologies. The obtained maximum specific capacitance (SC) is 476.69 Fg-1 at a 5 mV/S scan rate for a 0.2 M electrode in a 1 M aqueous KOH electrolyte solution. Specific Energy is 3.86 Whkg-1, Specific power is 0.64 kWkg-1, and electrochemical impedance spectroscopy (EIS) analysis is carried out in the frequency range of 1 mHz to 1 MHz.
Received: 27 Feb 2024
Revised: 05 Mar 2024
Accepted: 05 Mar 2024
Published online: 05 Mar 2024
Article type:
Research Paper
DOI:
10.30919/esee1105
Volume:
23
Article :
1105
Citation:
ES Energy and Environment, 2024, 23, 1105
Permissions:
Copyright
Number of downloads:
166
Citation Information:
16
Description:
In this work, we have deposited Cadmium oxide on the stainless steel by an Electrodeposition method ....
In this work, we have deposited Cadmium oxide on the stainless steel by an Electrodeposition method using Cadmium nitrate for supercapacitor application
This article is cited by 16 publications.
This article is cited by 16 publications.
Copyright © 2026 Engineered Science Publisher, All Rights Reserved