1. Polymer, Nanomaterials and Engineering

     Yamin Pan, Daoyuan Wang, Grant Wangila, Mansour Mortazavi, Fangfang Li, Ping Peng, Xianhu Liu, Qinglong Jiang and Zhanhu Guo

 2. The Latest Progress in Research of Plastics Processing Technology

     Guizhen Zhang, Zhaoxia Huang, Huanhuan Zhang, Guangjian He, Xiaochun Yin, Yanhong Feng and Jinping Qu

 3. Injection Molding Technology for Processing Polymers and Their Composites

     Hongbo Fu, Hong Xu, Ying Liu, Zhaogang Yang, S. Kormakov, Daming Wu and Jingyao Sun

 4. Water-Assisted Injection Molding

      Yamin Pan, Xianhu Liu, Chuntai Liu and Changyu Shen

 5. Micro-Nano Manufacturing Technology for the Fabrication of Polymers

      Yunming Wang, Dan Chen and Huamin Zhou

 6. Micro/Nano-Scale 3-Dimensional Fabrication using Multi-Photons Polymerization

     Ilwoo Seok and Dan Kilula

 7. Progress and application of phase change materials and their technology

      Yue Luo, Jintao Huang, Yidong Liu and Yonggang Min

 8. Ultrasonic Assisted Manufacturing Multifunctional Carbon Nanotube Nanopaper Based Polymer Nanocomposites

      Dan Zhang, Jingyao Sun, L. James Lee and Jose M. Castro

 9. Modification and Characterization of carbon fiber surfaces and composite interphases

      Ying Li and Bo Jiang

Xianhu Liu, Ph.D.

Professor of Advanced Polymer Processing Technology

Zhengzhou University, China

Xianhu Liu received his dual Ph.D. degrees in material processing engineering from Zhengzhou University, China (2015) and polymer science from Friedrich-Alexander-University Erlangen-Nuremberg, Germany (2016). He is currently a professor at the National Engineering Research Center for Advanced Polymer Processing Technology, Zhengzhou University. His research focuses on advanced polymer processing in functional applications such as energy saving.

Qinglong Jiang, Ph.D.

Associate Professor of Nanoscience-Chemistry

University of Arkansas

Pine Bluff, Arkansas

Qinglong Jiang is currently an associate professor in University of Arkansas, Pine Bluff. He is the fellow of Engineered Science Society, USA. He worked for Argonne National Laboratory after his postdoc researcher career in Florida State University/National High Magnetic Field Lab. He is interested in solar cell, light emitting, electrochromism, nanomaterials, optical electronic devices. He has over 70 publications including Angewandte Chemie, Adv. Energy Mater., ACS Nano, Nano Energy, ACS Energy Lett., Chem. Commu., JPCL. He has over 30 presentations including international invited/keynote talks. Dr. Jiang is also serving as managing editor for Eng. Sci. and ES Energy & Environ., editorial board for Adv. Compos. & Hybrid Mater., and reviewer for journals such as J. Mat. Chem. A, ACS Applied Mater. & Interfaces, Chem. Comm. et al. He is awarded for VFF of DOE for 2019 and 2020.

Dawei Jiang, Ph.D.

Associate Professor of Chemical Engineering and Resource Utilization

Northeast Forestry University, China

Dawei Jiang received his Ph.D. degrees in chemical engineering and technology from Harbin Institute of Technology, China (2015) and ever as a visiting student visited Lamar University, USA (2013). He is currently an associate professor at College of Chemistry, Chemical Engineering and Resource Utilization, Northeast Forestry University. His research focuses on advanced polymer processing in flame resistant material and intelligent flexible polymer material.

Zijian Wu, Ph.D.

Associate Professor of Material Science and Chemical Engineering

Harbin University of Science and Technology, China

Zijian Wu received his Ph.D. degrees in chemical engineering and technology from Harbin Institute of Technology, China (2015) and ever as a visiting student visited General Motors Research-Development Center, USA (2012). He is currently an associate professor at the School of Material Science and Chemical Engineering, Harbin University of Science and Technology. His research focuses on functional dielectric materials and polymer composites.