ES Materials & Manufacturing is a multidisciplinary peer-reviewed international research journal incorporating research activities in all experimental and theoretical aspects of materials and manufacturing. The research topics include the most exciting and significant advances in all areas of materials research and their related manufacturing process. Both fundamental and applied studies are encouraged, e.g., functional materials for energy-, optics-, and electronic-related applications, biomaterials, structural materials, advanced manufacturing, chemical/physical processes during materials synthesis or manufacturing, and computational materials science. This journal specializes in cutting-edge research with the mission of providing sustained value in the evolving world of academic and industrial fields.
Any article that focuses on, but not limited to the following field of research will be considered for its publication, upon satisfying accepted ethical and scientific publishing standards.
Article types
ES Materials & Manufacturing accepts the manuscripts in the following formats:
Indexing and Archiving
ES Materials & Manufacturing is covered by the following databases and archives:
Indexing & Abstracting Services |
Content Aggregators |
Copyright Information
Engineered Science Publisher Policies
© Engineered Science Publisher LLC
Processing Time
Depending on the manuscript type and number of submissions, the average manuscript turnaround time (the average time from submission to initial decision) will be around 10 days and the submission to acceptance ranges from 6-7 weeks.
After acceptance, the citable just-accepted manuscript with doi will be online in 1 week and another 4-5 weeks to get the final corrected article online after getting the authors’ final proof. The print version will be available 2-3 weeks later after the online volume is issued.
The ES Materials & Manufacturing Journal is owned and managed by Engineered Science Publisher.
No article processing fee is applicable. All published articles will be free for access until 2025. Gold premium open access is an option for life-time free access to public. This open access is at a cost of $2500 per article.
Please feel free to recommend this journal to your Libarian, please visit this link for recommendation.
http://www.espublisher.com/recomendtolibrarian
For information on subscription rates please contact Engineered Science Publisher Customer Service Center: [email protected]
The ES Materials & Manufacturing Journal is owned and managed by Engineered Science Publisher.
No article processing fee is applicable. All published articles will be free for access until 2025. Gold premium open access is an option for life-time free access to public. This open access is at a cost of $2500 per article.
Please feel free to recommend this journal to your Libarian, please visit this link for recommendation.
http://www.espublisher.com/recomendtolibrarian
For information on subscription rates please contact Engineered Science Publisher Customer Service Center: [email protected]
Special issue on commemorating the career of Prof. C. D. Lokhande ES Materials & Manufacturing, the journal published by Engineered Science Publisher, soliciting ...
Read MoreAnnual Best Paper Award for ES Materials & Manufacturing To recognize the significant contribution to the development of ES Materials & Manufacturing journal, the&...
Read MorePlease visit the website: espublisher.com for more information
Journal- ES Materials & Manufacturing
197 views . 11 months ago
New Functions of Polyaniline
Thermal Studies of Three-Dimensional Printing Using Pulsed Laser Heating
Fabrication of pH-electroactive Bacterial Cellulose/Polyaniline Hydrogel for the Development of a Controlled Drug Release System
Enhanced Electrochemical Performance of Cu2+ doped TiO2 Nanoparticles for Lithium-ion Battery
Novel Superhydrophobic Cement-based Materials Achieved by Construction of Hierarchical Surface Structure with FAS/SiO2 Hybrid Nanocomposites
TiO2/Cyclodextrin Hybrid Structure with Efficient Photocatalytic Water Splitting
Phonon Transport within Periodic Porous Structures - From Classical Phonon Size Effects to Wave Effects
Development and Application of Hot Embossing in Polymer Processing: A Review
A New Machine Learning Algorithm to Optimize A Reduced Mechanism of 2-Butanone and the Comparison with Other Algorithms
Temperature-dependent Optical Characterization of VO2 Thin Film Prepared from Furnace Oxidation Method
Amino Carbon Nanotube Modified Reduced Graphene Oxide Aerogel for Oil/Water Separation
Phonon Thermal Transport Properties of Graphene Periodically Embedded with Four- and Eight-membered Rings: a Molecular Dynamics Study
Improved Bonding Strength Between Thermoplastic Resin and Ti Alloy with Surface Treatments by Multi-step Anodization and Single-step Micro-arc Oxidation Method: A Comparative Study
A Review on Durability of Alkali-activated System from Sustainable Construction Materials to Infrastructures
Recent Advances in Thermal Interface Materials
The Doping of Alkali Metal for Halide Perovskites
Fabrication of N, P-codoped Mo2C/Carbon Nanofibers via Electrospinning as Electrocatalyst for Hydrogen Evolution Reaction
Microalgal-immobilized Biocomposite Scaffold Fabricated by Fused Deposition Modeling 3D Printing Technology for Dyes Removal
Mechanical and Conductive Properties of Smart Cementitious Composites with Conductive Rubber Crumbs
A Facile Synthesis of Ag/TiO2/rGO Nanocomposites with Enhanced Visible Light Photocatalytic Activity
Mesoscopic Finite Element Simulation on the Interfacial Bonding Performance of Functionally Gradient Concrete
An Efficient Polyvinylidene Fluoride (PVDF) Nanogenerator for Energy Harvesting in Low Frequency Range
Thermal Characterization of Convective Heat Transfer in Microwires Based on Modified Steady State “Hot Wire” Method
Fabrication of pH-electroactive Bacterial Cellulose/Polyaniline Hydrogel for the Development of a Controlled Drug Release System
Advanced Metal Oxides and Nitrides Thermoelectric Materials for Energy Harvesting
New Functions of Polyaniline
Modulated Rate (Time) – Dependent Strain Hardening of Ag/Bi2223 Composite Wire Flattened in a Low – Strength AgMg Alloy Matrix
Effect of Cocrystal Behavior on Sensitivity and Thermal Decomposition Mechanisms of CL-20/HMX via Molecular Dynamics Simulations
Novel Superhydrophobic Cement-based Materials Achieved by Construction of Hierarchical Surface Structure with FAS/SiO2 Hybrid Nanocomposites
In-situ X-ray Observation of Synthesizing Process for Rare-earth Transition-metal Pnictides under High Temperature and High Pressure
Enhanced Electrochemical Performance of Cu2+ doped TiO2 Nanoparticles for Lithium-ion Battery
Qing Hao, University of Arizona, USA
Ying Li, Texas A&M University, USA
Na (Luna) Lu, Purdue University, USA
Yijun Shi, Luleå University of Technology, Sweden
Rakesh Agrawal, Purdue University, USA
Jinlong Gong, Tianjin University, China
Xiaoguang Li, University of Science and Technology of China, China
Cewen Nan, Tsinghua University, China
Surendra Shah, Northwestern University, USA
Zhiqiang Liu, Chinese Academy of Science, China
Paolo Mele, Shibaura Institute of Technology, Japan
Caiyun Wang, University of Wollongong, Australia
Zhe Wang, Oakland University Chemistry department
Jinglei Yang, Hong Kong University of Science & Technology, China
Nuo Yang, Huazhong University of Science and Technology, China
Dazhi Sun, Southern University of Science and technology, China
Subramania Angaiah, Pondicherry University, India
Ai Du, Tongji University, China
Hongbo Gu, Tongji University, China
Qinyu He, South China Normal University, China
Yuanbing Mao, Illinois Institute of Technology, USA
Bo Jiang, Harbin Institute of Technology, China
Qinglong Jiang, University of Arkansas at Pine Bluff, USA
Habib M. Pathan, Savitribai Phule Pune University, India
Luyi Sun, Department of Chemical & Biomolecular Engineering, USA
Ahmad Umar, Najran University, Najran, Kingdom of Saudi Arabia
Jinshu Wang, Beijing University of Technology, China
Hongbo Zeng, University of Alberta, Canada.
Ke Bi, Beijing University of Posts and Telecommunications, China
Xin Cheng, University of Jinan, China
Henry A. Colorado, Universidad de Antioquia, Colombia
Nelson Y. Dzade, Cardiff University, United Kingdom
Tamio Endo, Emeritus Professor of Mie University, Japan
Shien-Ping Feng, Hong Kong University, China
Min Gao, Cardiff University, UK
Lilin He, Oak Ridge National Laboratory, USA
Pengkun Hou, University of Jinan, China
Shifeng Hou, Shandong University, China
Baoling Huang, The Honk Kong University of Science and Technology, China
Sandesh R. Jadkar, Savitribai Phule Pune University, India
Zaixing Jiang, Harbin University of Technology, China
Georgios Karagiannis, Durham University, UK
Jun Li, Chinese Academy of Science, China
Qinyi Li, Kyushu University, Japan
Wengui Li, University of Technology Sydeny, Australia
Guang Lin, Purdue university, USA
Xianhu Liu, Zhenzhou University, China
Hongyan Ma, Missouri University of Science & Technology, USA
Edoardo Magnone, Dongguk University, South Korea
Rahul Rangrao Patil, BASF, Beamount Texas, USA
Ilwoo Seok, Arkansas State University, USA
Lidija Siller, Newcastle University, UK
Tyler Tallman, Purdue University, China
Liping Wang, Arizona State University, USA
Even K. Wujcik, University of Alabama, USA
Yongzheng Wen, Tsinghua University, China
Guang Yang, Huazhong University of Science and Technology, China
Jingfang Yu, University of Oxford, United Kingdom
Mona Zebarjadi, University of Virginia, USA
Yanliang Zhang, University of Notre Dame, USA
For Futher information, Please Contact
Dr. Vignesh Murugadoss,
Journal Coordinator,
Engineered Science Publisher LLC,
Gwinhurst Road Knoxville, TN 37934 USA
Email: [email protected]
Phone: +91 7598143068
Enter your login details below to submit your paper to ES Materials & Manufacturing Journal. If you do not already have an account,you will need to register here.
Submit your Article